Question about 1999 Chevrolet Astro

1 Answer

I need power getting to the compressor

There is not power getting to the a/c compressor . There is refrigerant in the sistem . I jumped the low pressure control and nathing happend . I'm trying to get to the thermostat , but I don't know how to find it. I took out some parts inside the car , but I couldn't go ahead . I need help in how to find the thermostat to see if is open. I need to know how to check the selector that turns the a/c on. thanks

Posted by on

  • erasmodixie Mar 13, 2009

    Thanks asetech74. I checked the relay and the fuses already . all is ok . I am thinking in the thermostat or the selector that turns the a/c on . The problem is that I couldn't have acces to the thermostat . Thanks a lot.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 218 Answers

Have you checked the a/c compressor relay? Should be a relay for the a/c compressor in the fuse block. Hope this helps

Posted on Mar 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Eldorado Cadillac ac compressor won't take freon. Display says compressor off, low refrigerant. How to bypass computer? Can compressor relay be jumped using paper clip? Which holes? to


Grab some refrigerant gauges and take readings. If the low side has more than 40 psi or so of pressure, the low limit switch will close and allow the compressor to run. If there is indeed low pressure causing the compressor not to run, you will need to flush the system after eliminating the source of the leak. If the a/c compressor has never been changed, it is probably the source of the leak.

Feb 18, 2015 | 1993 Cadillac Eldorado

2 Answers

Ac problems


Either connection is bad to low pressure sensor or pressure sensor is faulty.

Jun 22, 2014 | 1997 Cadillac DeVille

1 Answer

Ac vent blower


proceed according and fix it. God bless you
If so, the compressor is working and the A/C system probably contains enough refrigerant to make cold air, so the problem is inside the HVAC unit. Replace the motor that controls the blend air door (this is a difficult job and best left to a professional since it involves tearing apart the HVAC unit -- about an 8 to 10 hour job!).
If the compressor does not engage when you turn on the A/C, see if it will run by jumping the compressor clutch wire directly to the battery (use a fused jumper wire). If the compressor works when you jump it, and the A/C blows cold air, the system contains refrigerant and the fault is likely a bad A/C compressor clutch relay or a bad clutch cycling switch or pressure switch.
If the compressor does not engage when you jump it, the problem is a bad compressor clutch.
If the clutch engages but the compressor does not turn (the belt will start to slip and squeal), the compressor is locked up and you need a new compressor.
If the compressor clutch engages and turns the compressor, but the A/C still does not blow cold air, the system is probably low on refrigerant and needs to be recharged

10_5_2012_12_14_20_pm.jpg

Oct 05, 2012 | 2001 Oldsmobile Aurora

1 Answer

What energizes ac relay on 2005 freestar


The low side pressure switch in the AC low pressure line signals the PCM (computer control) to close the AC compressor relay and raise the idle speed. If the system is low on refrigerant charge the relay will not allow the system to engage the compressor, this is because the oil that lubricates all the works is suspended in the AC refrigerant, if that is low then the system gets no lubrication and will quickly seize up..

Mar 23, 2012 | 2005 Ford Freestar

1 Answer

My ac is not working in my 93 buick lesare my father thinks it might be the low pressure sensor when he tested it there was no power coming out


you can jump the compressor with a paper clip bent into a u shape to see if it willl run if your refrigerant is gone, jump it at the low pressure switch across the wiring harness.

Aug 09, 2011 | 1993 Buick LeSabre

1 Answer

To add 134a, which of three wires on the pressure switch should I jump to get the compressor to run to add freon?


you don't need to jump the wires. even if the compressor clutch is not turning add the refrigerant to the low side port, it will go in through its own pressure when a safe level for the compressor to run has been reached the clutch will engage. at first the clutch will spin a second or two and stop and then begin again, from there continue adding refrigerant the clutch should spin continuously. if the clutch fails to ever engage the compressor is bad or there is a wiring problem.

May 12, 2011 | 2005 Chrysler Pacifica

1 Answer

Hi my a/c has stopped cooling, the a/c will blow hot air though. i looked under the hood and noticed the compressor was not turning. i checked to see if there was power getting to the compressor and...


If all your fuses are good and you could not jump the clutch to work. I would check to see if you A/C system is fully charged. If you are too low on refrigerant there is a low pressure switch that will stop the system from engageing the clutch on your compressor to stop the compressor from being run low on oil and refrigerant which could cause damage to it and the A/C system.

Apr 01, 2011 | Ford Mustang Cars & Trucks

2 Answers

Just replaced the air conditioner compressor last fall worked great for a couple months before winter came. not i need to use it again, the blower works but the compressor doesn't kick in


must check the ac relay and fuses before jumping to the climate control, due to lack of information don't just take it to any body, recommend specialist on AC only

Mar 24, 2010 | 2002 Dodge Durango

1 Answer

Air conditioning compressor not getting power on 96 Chevy Tahoe


Freon is what you are missing, our more specificly a refigerant charge that exceeds 45psi on the low side pressure line. This system has two pressure switches, a high side cut-out switch mounted on the rear of the compressor, and a low side or pressure cycling switch on the suction line.
Jump the low side switch contacts to ensure the electronics are sound for this system. If the compressor cycles, you know the system is low on a refrigerant charge. Turning on the AC is a request, and certain criteria must be met before the system operates as designed. Good luck

Mar 12, 2010 | 1996 Chevrolet Tahoe

2 Answers

1997 Deville ac compressor locked out - low


70 psi static does need a charge.find compressor relay, jump relay and compressor will start. add refrigerant,replace relay and a/c should work fine

Apr 16, 2009 | 1997 Cadillac Eldorado

Not finding what you are looking for?
1999 Chevrolet Astro Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...