Question about 2006 Toyota Tacoma

1 Answer

I need a part diagram for a Toyota Tacoma V6 there is a fuse or fuseable link that might be bad but it's bolted in and I need to find out how to get it out. The part in question is a 140a fuse???

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

You will find that there are 10 mm bolts holding it in, you must unbolt the power distribution box then unclip the 2 sections that hold it together thus exposing the bolts that hold it in.

Posted on Aug 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bolt size for harmonic balancer 1995 Toyota Tacoma v6 3.4l

Balancer Toyota Tacoma dimensions are
approximately between 5-6 inches in diameter and
2-3inch wide,

Jan 07, 2016 | Toyota Cars & Trucks

1 Answer

How do i change the alternator fuse

Most imports use a big fuse or a fuseable link wire.
The fuse would be at least 50amp or more.

Jul 01, 2012 | 1998 Toyota Tacoma

2 Answers

I have a 1987 toyota pickup and I blew an 80 amp fuse in a fuse box that is located in line from my battery to the starter. This seems to be a relay box which feeds the starter. I tried to pull the fuse...

it is bolted underneath of the fuse box. Disconnect the positive battery terminal FIRST. Then remove the three bolts holding the fuse box on. flip it over, and remove the bolts holding the fuseable link in place. installation is the reverse.

Feb 16, 2011 | 1987 Toyota Pickup

1 Answer

To get the harmonic balancer off 1996 Tacoma 3.4L V6,what way do you turn the bolt to remove it?

You turn the bolt counterclock wise, The bolt is very tight, you may have to use a holding fixture to keep the crank from turning.

Jan 14, 2011 | 1996 Toyota Tacoma

1 Answer

I need a belt diagram for a Toyota 4.0 liter?

Be more specific on which vehicle. I have a Toyota Tacoma 2002 V6 and have all of the diagrams.

Nov 11, 2010 | Toyota Tacoma Cars & Trucks

1 Answer

Timing belt diagram the timing belt came off timing

Click on the following free, direct Link. I realize the Link has "4 Runner, but the 4-Runner and PreRunner have the exact same Engines (2.7L & 3.4L).
The Link has the Timing Belt Diagrams for your 1999 Toyota PreRunner for either the 2.7L DOHC In-Line 4-Cylinder or 3.4L DOHC V6 Engines; including Marks and Instructional Diagrams.

Let me know if this helped...

Apr 12, 2010 | 1999 Toyota Tacoma PreRunner

2 Answers

Which fuse controls the stero and cigratte lighter

you should have that info in your manual. If not, you can download one from the web site.

Jun 15, 2009 | 2003 Toyota Tacoma

3 Answers

Procedure to change serpentine belt 2006 toyota tacoma?

On my 2005 Tacoma with the 4.0L V6, I found it easier to change the belt from under the truck. Just remove the skid pan. Plenty of room to install the belt. The tensioner pulley is the one at about 2-o'clock from the crankshaft with the belt nearly all the way around it.

Feb 06, 2009 | 2006 Toyota Tacoma

1 Answer

Tacoma v6 firing order diagram

Front 1 3 5


vehicle 2 4 6

You have a distributorless ignition. This is the firing order, 1-2-3-4-5-6.
Please remember to rate this answer.

Oct 09, 2008 | 2002 Toyota Tacoma

1 Answer

I need to remove the 100 amp fuse on my 05 toyota tacoma

You need to pull the fuse box out, and loosen the fuse holder panel. This is harder than it sounds, trust me. The 100 amp fuse is bolted in, 10 millimeter bolt. Make sure that battery is DISCONNECTED when you do this.

Aug 03, 2008 | 2002 Toyota Tacoma

Not finding what you are looking for?
2006 Toyota Tacoma Logo

Related Topics:

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides