Question about Nissan Frontier
Sounds like the front end is falling apart on rough roads
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
That's indicative of a wheel bearing, which is why you were told to change that out. However, it's also possible that the carrier bearings in the differential (where the drive axles attach) have gone bad. That happened to me on my 300ZX several years ago, and I had to replace the diff bearings. I would have them checked out somewhere other than a dealer (you'll probably get a better price from an independent shop).
As a sidenote, to be sure it wasn't a wheel bearing, if you hear it quiet down in a turn one way but get louder in a turn the opposite way, it's likely the wheel bearing. If you turn left at speed and it gets louder, then it's the right bearing (since you're loading up that side of the car). If it gets quieter in a right turn, it's the right side (you're unloading that side of the car and not putting as much weight on it, so it doesn't drag as badly). See if you get that symptom just to be sure that the wrong side front wheel bearing wasn't changed.
Posted on Sep 01, 2008
You must replace wheel bearings in pairs to avoid loading the old bearing and, in time ruining your new bearing hub it is possible that you have already damaged the new hub
Posted on Apr 20, 2009
SOURCE: front end rattle
It's a loose steering column. Remove the black plastic shield under the steering wheel. Lossen the bolt that holds the two shafts together, slide them together as far as they'll go, and re-tighten the bolt. It's that simple... to stop that annoying rattle.
Posted on May 15, 2009
THIS NOISE IS USUALLY THE HUB. HAVE SOMEONE GO WITH YOU ON A TEST DRIVE. GET THE ROARING TO HAPPEN AT ITS LOUDEST AND GENTLY SWERVE THE CAR LEFT AND RIGHT. DON'T BE SURPRISED IF YOU THINK BOTH HUBS ARE BAD. LIFT THE FRONT OF THE CAR AND PUT IT ON JACK STANDS. PULL OUTWARD ON THE BOTTOM OF THE TIRE WHILE PUSHING INWARD ON THE TOP OF THE WHEEL. IF THE WHEEL MOVES EXCESSIVELY YOU FOUND THE HUB THAT IS NOISY. USING A MECHANICS STETHOSCOPE YOU CAN SOMETIMES HEAR A ROARING TYPE NOISE ON THE BACKING PLATE SIDE OF THE HUB WITH THE ENGINE RUNNING AND THE TRANS IN GEAR. TRY NOT TO GET THE SPEED UP TOO FAR ESPECIALLY IF YOU CAN HEAR THE NOISE AT LOW SPEED, YOU DON'T WANT TO VIBRATE OFF THE STANDS.
Posted on Jun 15, 2009
Tips for a great answer:
Nov 07, 2015 | Cars & Trucks
Sep 23, 2015 | Cars & Trucks
Dec 18, 2014 | Cars & Trucks
Dec 29, 2012 | 2004 Chevrolet TrailBlazer
Jul 15, 2010 | 1995 Cadillac DeVille
Jan 11, 2009 | 2001 Jaguar S-Type
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: