Question about Ford Probe
My 94 ford probe alarm needs to be reset....how do I reset it? I disconnected the battery and it still does not work.
Have you tried unlocking the drivers door with the key? This is a common way to re-set a factory alarm system. If you have an aftermarket alarm there is often a small toggle switch mounted under the drivers side steering column.
Posted on Apr 24, 2013
Testimonial: "Itried that and it did not work...."
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The car needs to be running with the transmission warm, (drive around for at least 10 minutes) Place the car in neutral. Pull the stick wipe it off and place it back in the transmission. Reads just like an oil stick, want fluid in the safe range (checked pattern) area.
Posted on May 12, 2009
SOURCE: ELANTRA ALARM PROBLEM
If the alarm keeps going off constantly and the remote has no influence on the alarm its most likely a connection problem. A hyundai dealer might be able to fix it but since you can start the car something you might be able to try is....
Check and make sure the remote battery is in the right way. Make sure all of the doors are closed, the trunk is closed, open the hood, connect the battery, close the hood all the way and try to lock and unlock the doors. Hope this works but if not, sorry it didn't work.
Posted on Jul 08, 2009
there are two buttons on the diagram panel screen, push and hold top button and a one of the entries will start to blink, then you use the bottom button to change the entry, when you are ready to move to the next entry push the top button again.
Posted on Aug 07, 2009
stick key in driver door lock and unlock it. If that works, now see if the remote will unlock the door or doors..i remember reading in an owners manual once where you can program which doors open and close by they way you press and hold down the two main buttons, also after a battery change in the remote, i think, but not sure, i did this on a blazar i once owned... the owners manual said, that you had to be within 20 feet and press and hold down both buttons till it makes the arming sound.... Can i get some feedback cause im curious..thanks.
Posted on Apr 04, 2010
Tips for a great answer:
Apr 02, 2015 | 1996 Ford Explorer
Aug 25, 2009 | Ford Probe Cars & Trucks
Dec 05, 2014 | Cars & Trucks
Oct 08, 2012 | 2004 Ford F150
Jun 16, 2011 | 2002 Ford F350 Super Duty DRW Reg. Cab
Feb 10, 2011 | Ford Escort Cars & Trucks
Jan 10, 2011 | 2001 Ford Mustang
Oct 30, 2010 | 1991 Ford Probe
Sep 13, 2009 | Chrysler LHS Cars & Trucks
May 22, 2018 | Ford Cars & Trucks
319 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: