Service traction control system - 2007 Saturn Aura XR Sedan

What it looks like: The traction control warning light typically takes the form of the acronym "TC." Sometimes this light is a small illuminated picture of a car losing control What it looks like: The traction control warning light typically takes the form of the acronym "TC." Sometimes this light is a small illuminated picture of a car losing control. How this system works: Traction control uses wheel speed sensors to detect when one or more of the car's wheels lose grip and traction. When the system registers a loss of traction in one or more of the wheels, a computer will limit power to the wheels that are still in solid contact with the road to prevent a skid. Common reasons for this to happen:

• ABS is malfunctioning: Traction control and ABS (anti-lock braking system) often share the same control module and internal self-diagnostics system. As a result, sometimes an issue in the ABS can trigger the traction control light. If this is the case, then both the ABS and Traction Control lights will be on.
• Broken wheel speed sensors: Wheel speed sensors are usually in the wheel bearing assembly, and determine the rate at which each wheel is moving. The sensors relay that information to the traction control module, which determines whether or not power needs to be shifted. Wheel speed sensors can get dirty or damaged and stop working, which prohibits the traction control module from knowing when to enable the system.Traction control module is faulty: The traction control module - which, again, is often shared with the ABS - can malfunction and break altogether, causing the system to stop working. What to expect: A top-rated mobile mechanic will come to your home or office to determine the source and cause of the traction control issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs. How important is this service? It's important to have the traction control issue investigated as soon as possible, as adverse driving conditions can arise at any time. While your car is unlikely to incur further damage from a faulty traction control system, it won't be safe to drive in rain, snow, sleet, or other inclement weather, or even possibly through pools of water on the road. Furthermore, the issue that is causing the traction control light to illuminate could also be impacting the ABS.

Most likely one of your wheel sensors is disconnected, shorted, or simply not registering. All these systems work on measuring wheel rotation. If one or more sensors can't measure wheel rotation, you get a service light.

About 39,700,000 results (0.44 seconds) Search Results

Traction Control Light is on Inspection - YourMechanic

www.yourmechanic.com > Auto Repair and Maintenance Services
As a result, sometimes an issue in the ABS can trigger the traction control light. If this is the case, then both the ABS and Traction Control lights will be on.

My anti-lock brakes and service traction control lights came on ...

https://answers.yahoo.com/question/index?qid...
Oct 16, 2006 - I drive a 2000 chevy impala...i have 135,000 miles on my car. ... The problem is that starting in '92, Anti-Lock Brakes are controled electronically, so if there is a problem with the sensor, your ABS might fail when you need them the most. ...ABS (?nti-lock Brake System) is a ...

How To Fix ABS & Traction OFF / Service Traction System ...

? 5:35
https://www.youtube.com/watch?v=KFQphWamcjQ
Feb 17, 2014 - Uploaded by Zero Gar
How To Fix ABS & Traction OFF / Service Traction SystemLight Monte ... side connector that leads from the ABS controlmodule to the speed ...

Search Results

where is the traction control button in my 2000 buick century ...

buickforums.com > ... > Buick Century Forum
Oct 5, 2009 - Odds are you don't have that option. The light is just a glitch. Turn it offwith black tape. If by some chance you have the famous GM trac control, ...

Disabling Traction Control - YouTube

? 4:03
https://www.youtube.com/watch?v=gmBfAlm7sqc
Jun 29, 2008 - Uploaded by XholdstillX
So I made this video to demonstrate how to disable traction control on my MK4 2001 Jetta 1.8t. My car did not come with thetraction control button, commonly... ... How To Fix ABS & Traction OFF / Service Traction System Light Monte Carlo Chevy Impala Buick Century - Duration: 5:35. Zero Gar 224,245 ...

disabling traction control - GM Forum - Buick, Cadillac, Chev ...

www.gmforum.com > ... > 2000-2005
Jul 14, 2003 - How do you disable the traction control system so that you don't have to hit the 'traction' button every startup to turn it off? I'd rather not have.

Buick LeSabre turn off traction control Questions & Answers ...

StabiliTrak Indicator Light: If the warning light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If it stays on, or comes on when you are driving, there may be a problem with your StabiliTrak system and your vehicle may need service. When this warning light is on, the system is off and will not limit wheel spin. Adjust your driving accordingly.

This light will also flash when the StabiliTrak system is active. If the StabiliTrak system warning light comes on and stays on for an extended period of time when the system is turned on, your vehicle needs service.

The traction control part of StabiliTrak can be turned off by pressing and releasing the StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. To disable both traction control and StabiliTrak, press and hold the button for five seconds.

Traction control and StabiliTrak can be turned on by pressing and releasing the StabiliTrak button if not automatically shut off for any other reason.

When the TCS or StabiliTrak system is turned off, the StabiliTrak light and the appropriate TCS off or StabiliTrak off message will be displayed on the DIC to warn the driver. Your vehicle will still have brake-traction control when traction control is off, but will not be able to use the engine speed management system.

If the StabiliTrak and/or Traction Control are not operating properly, I encourage you to take your vehicle in for inspection. A certified technician will be able to offer a more accurate diagnosis.

Before replacing parts there is a specific way to start diagnostics an a professional grade scan tool is a must ! a code reader can not access the body control module , or the EBCM - electronic brake control module or instrument cluster ! All these modules communicate on the class 2 serial data bus.
Begin the system diagnosis with Diagnostic System Check - ABS . The Diagnostic System Check will provide the following information:
?€¢
The identification of the control modules which command the system

?€¢
The ability of the control modules to communicate through the serial data circuit

?€¢
The identification of any stored diagnostic trouble codes (DTCs) and their status

The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
The traction control switch is a input to the body control module, with a scan tool hooked up an looking at BCM data ,check for conformation the traction control switch is turning on an off !
SERVICE TRACTION SYSTEM The IPC illuminates the SERVICE TRACTION SYSTEM indicator in the message center when the electronic brake control module (EBCM) detects a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination. The SERVICE TRACTION SYSTEM indicator illuminates for 60 seconds when the condition is present. The IPC sends a class 2 message to the radio in order to activate an audible warning.
TRAC OFF The IPC illuminates the TRAC OFF indicator when the following occurs:
?€¢
The electronic brake control module (EBCM) inhibits the traction control system due to a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination.

?€¢
The body control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The BCM sends a class 2 message to the EBCM in order to disable traction control. The IPC receives a class 2 message from the EBCM requesting illumination. The BCM sends a class 2 message to the radio in order to activate an audible warning.

the ABS system is defective, probably one or more of the sensors.

Traction control system works with the ABS sensors to monitor to monitor traction slippage.

All are tied into the ABS system, traction as well as stabilization, This needs to be looked at by someone who can hook up a diagnostic tester to read the fault codes stored in the ABS system then perform the correct diagnostic procedures to isolate the problem

This is the automatic traction control system kicking it when going around corners. Vehicle may think tires are sliding around corners kicking in the traction control. If you don't like traction control, you should have a button to turn it off, or remove the fuse.

This light is usually caused by a problem in the ABS system. A problem in the ABS system will dissable the traction control system. you will need to have the computers scanned for trouble codes.


Tech JK
-------------------------------