Question about Chrysler Sebring
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most likely the oil pressure switch may be damaged. This is a simple procedure. Change and observe the results
Posted on Jan 23, 2009
Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.
Posted on Mar 26, 2009
2.7 ? This motor has oil problems if not changed every 3000 miles. Put a chrysler filter on it and the correct weight of oil, never use a fram oil filter.
Posted on Jul 02, 2009
Was the sending unit an aftermarket part?We like to install the original part back into most vehicle, but because of people price shopping, this can cause some issues. If the switch is working properly, the gauge should rise as the engine RPM's increase as you stated. With the key on and the engine off, disconnect the sending unit wire and ground it. The gauge should go to the highest reading, and that checks the wire, and the gauge. I suspect that the sending unit is failed or not the proper one for your vehicle.
Posted on Jan 07, 2010
Tips for a great answer:
Jan 30, 2011 | 2002 Chrysler Sebring
Dec 16, 2010 | 2002 Ford Explorer
Sep 02, 2010 | 2007 Chrysler Sebring Sedan
Dec 10, 2009 | 2002 Chrysler Sebring
Nov 07, 2009 | 2002 Chrysler Sebring
Oct 20, 2009 | 2002 Chevrolet TrailBlazer
Jul 30, 2009 | 2002 Chrysler Sebring
Mar 07, 2009 | 2000 Chrysler Sebring
Nov 22, 2017 | Chrysler Cars & Trucks
188 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: