'01 Jaguar XKR Front Turn Signal and Hazards no longer make Sound
When I turned left or right, I could hear the "blinker" on and when I finished the turn it would turn off. I can see the directional arrow on, but no sound is heard. Is this a bulb issue? Same is true with the Hazard lights.
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: '01 Jaguar XKR Front Turn Signal and Hazards no...
No its not a flasher issue there is a spring in the control arm thats causing this to sound/ So what I am saying its the switch that may need to be replaced or the metal rod is bent in the steering column Believe me I now its sounds weird. Sorry Lisa this is one recall if this is a Jaguar XKR coupe if it is a convertible there are 8 , On the site its pretty easy read the about us and why I do this Basically its to help people get things done inexpensive or what kinds of Shops to go to where you can save up to 50 dollars an hr. I also follow through on the help to make sure everything was done and nothing more.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
flasher/blinker is busted. this is located under your dash board. remove steering column cover, turn on LEFT turn signal (yes, the one that is working), then you will hear a clicking sound. locate the relay that causes the sound. there you can see 2 relays (one for LEFT, other one for RIGHT turn),replace busted one.
The signal wire going to the right front has a splice for the dash indicator, a wire branching off from the turn wire and going to the dash. It sounds like that right signal wire is broken or lost a connection before it splices off to the dash, so the problem sounds like it is under the dash, either coming out of the turn signal switch to the flasher or from the flasher to that splice. You may need a multi-meter to check voltages on that wire at various places under the dash. Ascertain which color wire you need to concentrate on. Check for voltage on it with key on and right blinker on-voltmeter will spike to battery voltage, then fall to zero as the flasher breaks voltage continuously, if checked after the flasher. If checked when leaving the turn switch, it should be a continuous signal on that wire. Think you better find a wiring diagram to find the right wire to check. Good luck.
that vehicle has a desperate relay for the hazards which is why they work, you have a defective signal flasher sometimes called a signal relay, follow the noise to locate exactly where the part is, usually under driver side of dash, it is a very cheap part and easy to install.
Hi, More detail please. if signal (blinkers) are working you will hear a clicking sound. If blinkers are blinking faster than normal the lights (right or left)(front or rear) needs to be checked out. (burned out bulbs). Replace it.
Have you tried replacing the bulbs? The two side lights run through the turn signal switch so if they aren't getting power, chances are your signal switch is bad. Do your front blinkers work? Do the rear lights come on when you use the blinkers or the hazards?