Question about Dodge Ram 2500

1 Answer

Turn off factory alarm

Truck wont start alarm is ingaged and all i have is the KEY.i tryed puting the KEY in the on posision and put battery ground back on nothing ,put the KEY in door locked it and unlocked it nothing,i dont no im lost

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,209 Answers

Not sure on this one, unless the switch is not connected to the drivers door handle. On a Dodge you disable the alarm by unlocking the drivers door with the key.

Posted on Apr 24, 2013

Testimonial: "you no what now that you say that my driver side door do not lock useing the door lock .when i exit i push the lock by hand.but the key will unlock and lock the door rome the out side.and with the hood up pulling the trailer relay fuse it turns alarm off, put it back in it starts up agin (alarm) for like 1 minute and gose off.open the door it gose off"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22265 Answers

SOURCE: new battery, can't reset alarm

remove the alarm,their might be a passive switch on the alarm to turn it off with a special key,if you dont have the key break the lock so you can turn it off or try to open case of alarm and look at wires and then dertimine which ones to join or break,every alarm inside is different so you will have to work it out.

Posted on Nov 28, 2008

TLRogue
  • 99 Answers

SOURCE: immobiliser wont go off , wont unlock the doors.

There is a way to override the code, however you need the code number. The only other way is to sit in car with door shut, play with the central locking button on dash, locking and unlocking. While doing this occassionally turn the ignition on and off. If you do it long enough, you may find the immobiliser light goes out, if it does, quickly start the car.

TL

Posted on Jan 21, 2009

  • 163 Answers

SOURCE: alarm problem on 97 acura tl - now car wont start

try turning the key on then taking the +side off then turn key off and reconect+

Posted on Jun 04, 2009

  • 233 Answers

SOURCE: Remote Door Lock/Unlock will not work.

At first look, I would have guessed that your battery in the door opener was dead, but that is not the case. I suggest driving to a nearby Chevy dealer and ask one of the salesman if he/she can help. They have always been helpful to me. If not try another one as they are in business to sell not only cars, but service also. They will be your best bet to fixing it. :D

Posted on Jun 08, 2009

  • 3 Answers

SOURCE: Alarm won't stop going off and car won't start

YOU MIGHT NEED TO BY PASS THE SYSTEM IF YOU DONT WANT TO MESS WITH IT OR TRY TO ALL THE SENSORS ON THE DOORS MAYTHEYRE NOT WORKING SOMETIMES THE RUBBER SEALS BRAKE AND THEN WATER MAY GET INTO THEM

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just found out my car had an alarm system but was disconnected and i connected it and now car wont start even if i disconnect it again


last ditch effort , disconnect the battery and wait 10 minutes and hope your system re sets itself , not knowing what make your car is , makes this hard to answer, or if it was a factory alarm or aftermarket ,,,, If its a factory alarm, you can do this Open the door with the key. (the alarm will sound but ignore that)
Close the doors, put the key in the ignition
Turn everything off that takes power when you got the ignition on.
Turn the key into first position (IIRC) the alarm will go off again, but still ignore that.
Then sit back and relax for exactly 15minutes, without touching anything nor opening any doors.
Then turn off the ignition.
That's it. Your alarm is now disabled.
Start the car and enjoy.

Jul 11, 2011 | Mitsubishi Galant Cars & Trucks

1 Answer

I have a 05 hyundai sonata. I put a new battery in now the alarm goes off and I don't have a remote. Car wont start


If it is an after market alarm you should be able to remove the in-line fuse from the power line to the alarm and solve the problem. Since you don't have the remote this was a problem anyway since if the alarm was triggered it would leave you stranded. It sounds like the starter kill switch is engaging. The key in the ignition should reset the alarm but sometimes they don't. You can try disconnecting the Positive cable from the battery and grounding it for 30 sec then reconnect it if the alarm is built in by the factory.

Jan 03, 2011 | Hyundai Sonata Cars & Trucks

2 Answers

Engine wont turn on, Battery is new, doesn't make any sound at all when turning the ignition on, all lights light up when turning ignition but does not start up. Perfectly normal when left the car, but...


check ALL the ground leads coming out of the battery,sounds like somethind is loose or not making a perfect connection,get back to me and we'll go through tracing the problem. remember lights do not need a pefect ground Thanks Ray please rate my fix

Feb 19, 2010 | 1996 Buick LeSabre

4 Answers

I would like to disable the factory anti-theft and security system on my 1994 jeep Wrangler with 4 cylinder. It drains the battery when left in storage/not driven for 2 months while on vacation. Then when...


Try Turn your vehicle on, while its on unhook the alarm box from behind the dash. if you attempt to do this without the vehicle on it will not work. an other solution would be to ground the purple and yellow wire on the drivers side door

Sep 05, 2009 | 1995 Jeep Grand Cherokee

1 Answer

My 2001 sebring wont start. I turn the key and it


you could very have a transponder key that has failed to let the circuit complete to start the car. check that with your local locksmith. also try to unlock your doors manually with key , on the driver side and turn to unlock at least three times, i know it sounds stupid but your car has a passive alarm built in that will prohibit it from starting sometimes because it was designed so well.:) good luck.

Jul 16, 2009 | 2001 Chrysler Sebring

1 Answer

Alarm problem on 97 acura tl - now car wont start


try turning the key on then taking the +side off then turn key off and reconect+

Jun 04, 2009 | 1997 Acura TL Series

2 Answers

I have a 99 pontiac grand am gt and my security light comes on


Hello and thank you for choosing fixya.com. It sounds like this may be a factory alarm. If you have the owners manual, or if you can get one for that specific model, you should be able to look up the alarm system and find out how to (if possible) disable the alarm temporarily. My other suggestions are as follows: 1. Check your battery terminal connections: make sure they are clean and secure; also, if possible, put some terminal grease on them to prevent corrosion, rust and acid build up. Check the connection to your starter as well as your ground to the frame/chassi/block, whichever it's grounded to. Some vechiles have a smaller ground wire that runs from the main ground on the batter to the body, next to the radiator somewhere or possibly on the side firewall. Check that all connections are clean, and secure. You may just have a bad ground which is a common problem in automotive electrical issues. Thank you again for choosing fixya.com and I hope that this information helps you fix your alarm system.

Apr 01, 2009 | 1999 Pontiac Grand Am GT

1 Answer

1994 T & C alarm (factory) goes off stops me from starting my Van


you can try a couple of things put the key in the drivers door lock manually lock and unlock the door
with it unlocked try starting the car if that doesn't work disconect the battery turn the key on then hook up the battery and try to start it also check your owners manual about the alarm
good luck!!

Jan 29, 2009 | 1994 Chrysler Town & Country

1 Answer

Security Alarm not working on VW Bora 2001


you can try to comand de doors puting the key in the door till all the windonwns are down than put than colse again maintainning the key in the close position

Oct 15, 2008 | 2001 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...