Question about 2000 Dodge Durango

1 Answer

2000 dodge durango blinkers wont work

We checked the fuses and they are fine

Posted by on

  • Mike Butler
    Mike Butler May 11, 2010

    I think he means try changing hazard flasher, with signal flasher. Do the signals come on, but don't blink, or don't come on at all, outside the vehicle?

  • erickirkland May 11, 2010

    try switching the hazard fuse with the blinker fuse



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 131 Answers

Try checking the Relay in the fuse box under the hood, and there is also one up under the dash, if you dont hear the relay click with you put power to it then pop it out then try a new one. a lot of times it could be the relay but you still get power to the fuse. cause the relay clicks closed and locks that way. if not that check for power at the blinker, take the bulb out turn the blinker on and see if there is a voltage change there if not then it could be a bad ground or line under the hood.

Posted on May 19, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My blinkers dont work and its not the fuse whats my problem

check that the blinker lever is ok, might need changing if not.

Jun 11, 2012 | 2000 Dodge Durango

1 Answer

2000 dodge durango blinkers don't work

most of the time when the blinkers are not working and have checked everthing its most likely the switch itself get u a hanes bookthey help out alot when having trouble

May 08, 2012 | 2000 Dodge Durango

1 Answer

2000 Dodge Durango blinkers not working (replaced relay already)

i would check the turn signal lever switch in the steering column.

Aug 15, 2017 | 2000 Dodge Durango

1 Answer

I have a 2000 Dodge Durango and we have been having blinker problems too lately. Sometimes they worked, sometimes they didnt, and the other day they went out completely.They have been doing this for a...

that vehicle has a desperate relay for the hazards which is why they work, you have a defective signal flasher sometimes called a signal relay, follow the noise to locate exactly where the part is, usually under driver side of dash, it is a very cheap part and easy to install.

Sep 26, 2011 | 2000 Dodge Durango

2 Answers

My blinkers are not working. Checked the fuse and it is fine. The manual stated that it may be the indicator bulb that is defective. The guy at the auto store told me it was the electric flasher. I...

it goes in the spot on the fuse box... or above it a ways... look for the same shape as the new one ( round?) when searching by the fuse block..

Oct 06, 2010 | 2000 Dodge Durango

1 Answer

How do I change a flasher in a 2000 dodge durango? Thank you.

the flasher should be up under the dash on the driver side, you should turn on the flasher that works if there is one and you will hear the click of it, once you hear it pull the one next to it that is not clicking, if that is the one to change, and replace it there. it should be in the area of your parking brake release.
also if it is that a blinker is not working or a flasher, check the fuse in the fuse panel, or also check the relay under the hood on the driverside in the relay box.

Apr 03, 2009 | 2000 Dodge Durango

7 Answers

My 2000 dodge durango turn signal lights stop working just recently. sometimes they would work and other times not, but now it just stoped.

A Mechanic told me my switch was broken, but the switch was working fine, the lights just stopped flashing. After some research and consulting with a male friend who knows more about this than I, we discovered it was only the turn signal flasher -- a $16.00 part. On the 2000 model, it's located under the dash, on a separate fuse panel I didn't even know was there. It's to the left of the steering column and right behind the main fuse box, but you can only get to it by going up under the dash. The green one is a little hard to get to, but that's the one for the hazard lights. Its easy to see with a good shop light. It's 1" by 1" ish. The turn signal flasher is below the green one. It's black and a little smaller, and much easier to get to. You simply unplug it and plug the new one in. Voila! There are other fuses on this panel -- I'm not sure what they go to, but I intend to find out so I don't waste money replacing parts I don't need to.

Apr 01, 2009 | 2000 Dodge Durango

1 Answer

Blinkers not working

check fuse 16 in the fuse block inside. if it has power on the sides it is possible the combination flasher is bad

Dec 14, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides