Question about 1999 Chevrolet Blazer

1 Answer

Emergency brake foot pedal not working

1999 Chevy Blazer=the emergency brake foot pedal does not "catch" when pushed down,it returns to the original position, further, the rear brakes are constantly engaged.
This is causing dragging and wearing the pads down fast. How do I release the pressure on the rear brakes and repair the foot pedal?

Posted by on

  • Anonymous Mar 24, 2014

    lost of pressure to the brake pedal

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

Sounds like the cable is stuck also check the catch on the foot pedel

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How too release the emergency brake foot pedal when the cable is broken?


About 73,400 results (0.87 seconds) Search Results

    Parking brake release cable snaps - Chevy Avalanche Fan Club of ...

    chevyavalanchefanclub.com > ... > Problems: Brakes

    24 posts - ‎16 authors
    Went to release the parking brake on my 04 and the cable snapped. ... More like the end cap coming of the cable that attaches to the foot pedal. ..... Then I released the parking brake, pulled out the broken release cable/handle assembly, ...

    How To Install Repair Replace Parking Brake Release ...

    ? 5:54
    https://www.youtube.com/watch?v=qx0oGfV62NQ
    Jun 23, 2011 - Uploaded by 1A Auto Parts
    How To Install Repair Replace Parking Brake Release CableHandle ... or replace a broken or worn out parking brake release cable handle.

    Emergency Brake Pedal Assembly & Stuck Brake Cable ...

    ? 10:13
    https://www.youtube.com/watch?v=0jYfvthBzhU
    Apr 17, 2014 - Uploaded by corgLLC
    Emergency (Parking) Brake Pedal Assembly & Stuck Emergency (Parking) Rear Brake Cable The emergency ...

    E-Brake Cable Broken? Stuck Emergency Brake... Help Please ' Chevy ...

    www.tahoeyukonforum.com > ... > Engine & Drivetrain


Jan 25, 2016 | Cars & Trucks

1 Answer

How to remove a parking brake release handle on a 1999 chevy blazer


Are you talking about the Foot Pedal Assembly?
Has a couple of bolts attaching it to bottom of dash and the cable running to the rear brakes. Hardest part might be unhooking the cable.

Dec 14, 2014 | 1999 Chevrolet Blazer

1 Answer

Why won't my parking brake pedal stay down?


Most parking brake pedals work with a dog and pawl , much like a row of saw type teeth that have a small pivoting stop which catches in the teeth to lock down the pedal. If the pivot does not fully engage to teeth because of dirt or rust the pedal will return to its original position. This may also happen if the release cable in not fully returning. You can try pushing on the release handle rather than pulling and see if your pedal now locks in place. You can lube these parts with a can of spray lithium grease but be sure to protect your carpet and pedals so they do not get stained or become slippery. Mask areas off with newspaper or cardboard. Work the pedal and release cable a few times. It will usually free up any binding parts. I hope this helps!

Aug 03, 2014 | 2001 GMC Jimmy

1 Answer

My emergency brake is having trouble releasing on my 2001 chevy blazer s10. it releases only by when i pull the lever and when i push the pedal back into position for it be released. im worried of thi


i would check the pedal itself, then pull the drums and try adjusting the brakes, if you havent done this in a while to clean and adjust them you might be better off replacing the shoes, all springs and adjusting them till the drum just starts to drag and rechecking the ebrake, if this doesn't help you will probably need e brake cables and possibly a pedal assembly if it is binding

Jan 15, 2013 | 2001 Chevrolet Blazer

1 Answer

Chevy blazer brake pedal going to the floor when engine is running


has to be air,try bleeding without the brake pedal,just open
the bleeders and let gravity run the fluid out,takes awhile but works.
(master cyl.cover off )

Dec 25, 2012 | 1999 Chevrolet Blazer

2 Answers

Hi: I have a 1998 Chevy Blazer 4.3 The brake lights and turn signals don't work.... HELP


Sounds like you have a bad multiple function turn signal switch. A couple things to try With your foot pressing on the brake pedal, Press the four way flasher button up and down, press and hold it down, pull up on it, or wiggle it. If the brake lights come on during any one of those replace the switch. With the key in the run position pull, push, the turn signal lever slightly. If the turn signal or brake lights start to work replace the switch. Let me know if none of those work, they usually do, and I'll get you some more in depth diagnostic info.

Jun 17, 2011 | 1998 Chevrolet Blazer

1 Answer

EMERGENCY BRAKE


All you can do is try some wd40 on it and try to work it free, if it won't go, then a new caliper is needed. To bleed the brakes, locate the bleed nipple on the caliper, get someone to sit in the car, then when you open the nipple (just crack it), get the person to push the brake pedal down and hold it down. Then close the nipple and release the pedal, repeat this process on both calipers until the pedal becomes right. Becareful when the pedal is pressed that you don't get covered in brake fluid, try and catch it in a container as it is lethal stuff.

Mar 24, 2009 | 1992 Cadillac Seville

1 Answer

1999 Chevy S10 Blazer 4x4. Replacing rear pad's,& Bleeding Breaks


have one person in the blazer pumping the brake pedal and then hold to the floor, crack the bleeder then tighten, release pedal, repeat till all air is out one side at a time, if this does not work then your ABS unit is bad witch if u follow your lines from your master cylinder u will find a black box with a motor on it, or the master cylinder itself is bad, it also can cause u to have no pedal, replace the master cylinder first, most likely cheaper.

Mar 11, 2009 | 1997 Chevrolet S-10 Pickup

2 Answers

Emergency brake pedal will not stay down when i press it.


The parking brake actuator (the mechanism you press with your foot) works like a ratchet wrench. The pedal has a cresent shaped plate with teeth on it. It pivots on a mounting plate. There is a pawl with a small spring also on the backing plate. This pawl engages the teeth on the pedal assembly to hold the brake engaged (against the large return spring).
Stick your head under the dash and look carefully at the parking brake actuator mechanism. See why the pawl is not engaging the teeth on the pedal assembly. Most likely causes are that the release mechanism is jammed "on" or that the light spring which attaches to the pawl is missing (usually from being kicked by some one with large feet) View this mechanism on another GM vehicle with the same style parking brake if you suspect that parts are missing.
Charlie

Dec 07, 2008 | 2002 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

750 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...