Question about 1997 Ford F250 SuperCab

Open Question

1999 Ford F250 Lariat lumbar control knobs

I need new lumbar control knobs for both front seats.
Both have the same knob and are no longer available
from the dealer.They have changed the design, and you have to buy the entire lumbar support system.All I need are
the knobs,the system works just fine.These knobs have some kind of clip on both sides that hold them on. I think
they just pull off, with a little help from long nose pliers.
Clip back on.??

Posted by on

  • jclark383 May 19, 2009

    I have the same problem. 1999 (early model) super duty f-250. Both knobs missing. Just the orange tube remains with the splines. They turn and work. Just need the knobs.

×

5 Suggested Answers

TORC
  • 53 Answers

SOURCE: Remove seat reclining knob


http://carservicemanuals.blogspot.com/2008/06/download-land-rover-discovery-workshop.html

Posted on Mar 30, 2009

  • 25 Answers

SOURCE: 1993 Ford F150 4X4 Power door locks, power

CK FOR POWER TO LOCK @ WINDOW SWITCH IT COMES FOR MASTER WINDOW SWITCH ON LEFT SIDE DOOR NOT SHORE ON LUMBAR CONN.UNDER SEAT CK IT FOR POWER

Posted on Sep 28, 2009

dsakrison1
  • 65 Answers

SOURCE: The lower lumbar support on the driver seat will

the air lumbar is an air bladder in the seat that is inflated by an air pump. Either the Check valve in the pump has failed and not holding air in the baldder, or the bladder has cracked and is leaking. May be possible to find another seat at a junk yard that is the same as yours. Replacing the entire seat is simpler then replacing just the bladder and pump assembly.

Posted on Oct 06, 2009

  • 564 Answers

SOURCE: 1996 Ford Explorer - Eddie Bauer 4WD - Replace Power Seat Switch

the switch pops in or out just pull on it unless you see screws it should just pop right out theres no need to worry about the srs.

Posted on Nov 14, 2009

  • 2926 Answers

SOURCE: I replaced my calipers on the front of my 1985

c615a38.jpg

90af45b.jpg
..............................

Posted on Jul 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove the lumbar knob on a Ford F150


there is either an attachment screw maybe under a plastic cover or a retention clip behind knob to hold it on

Aug 02, 2014 | 1997 Ford F150 Regular Cab

1 Answer

Where can I get replacement front car seat covers?


IPD, just search IPD Volvo in Portland Oregon.

Apr 25, 2014 | 1996 Volvo 850

1 Answer

Will A 1999 F250 Lariat Box Fit On A 1999 F250 Super Duty?


Ask that question at a Salvage Yard

They have all the books & computer
data to help you, with what fits what

Apr 02, 2013 | Cars & Trucks

1 Answer

The knob on the heater control is loose and I can't adjust the temperature. Will replacing the knob work or do I have to bring the car to the service department for it to be fixed?


You can try a Salvage yard or just order the knob at a Dealer. I went through the same thing with my 1999. If you look behind the knob you will probably see a crack where the metal clip sits.

My Salvage yards do not want to sell the Knob separate from the whole control unit. Yours may. It will be available at a Dealer and with Patience you can replace it yourself. You will see an irregular clear plastic shape behind the knob and that is all that needs lining up.

Sep 21, 2010 | 2002 Ford Escape

1 Answer

How to take out rear seats in a 2000 ford f250 lariat


crew cab,use a 50 torx in front bolts ,15mm on a ratchet on back bolts slide seat belt buckles throu seat crack ,fold rear of seat down ,lay seat with hinge toward floor slide out door (note watch brackets ,will scratch door pannals)

Aug 07, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

HOW TO ADJUST DRIVER'S SEAT IN HYUNDAI ELANTRA


There is a lever on the left side by your **** that tilts the seat forward or back. There are knobs on the side that you turn to raise the seat front up or down, there is a handle under the front of the seat that you either pull up or pull to the left to slide the seat front or back. And depending on the seat there might be a lever on the left side of the seat back that controls how much lumbar support.

Feb 02, 2010 | Hyundai Motor 2003 Elantra

1 Answer

No lumbar support


There are several problems that could exist. Firstly I would check the fuses. If all are good, either the knob has quit working, or the motor that increases and decreases the support has gone out. If you can find the positive and negative wires going from the wheel to the motor, you can test it with a voltometer. You would have to have a manual to identify the wires. But if you can, test to see if the knob is sending an electric signal to the motor in the seat. If there is a signal going through, the motor is out. If there is not a signal going out, the knob has probably gone out. Hope this helps.

Jan 14, 2010 | 2002 Ford F150 Regular Cab

1 Answer

Broken lumbar support


Go to the junk yard and pull you another one.

Nov 23, 2009 | 2001 Chevrolet Silverado 1500

1 Answer

Remove seat reclining knob



http://carservicemanuals.blogspot.com/2008/06/download-land-rover-discovery-workshop.html

Sep 08, 2008 | 2004 Land Rover Discovery

Not finding what you are looking for?
1997 Ford F250 SuperCab Logo

Related Topics:

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...