- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check the fuse/relay. if it is neither of these check the switch with a multimeter. If you can hear the motor trying to move the glass when you try the switch it may be the regulator needs attention. It may be the motor needs to be replaced.
check fuse and relay along with the switch first then the regulator and motor afterwards. Replacing the small electronics is obviously easier than having to open up the tailgate to check the mechanics of the winedow.
The tailgate assembly requires regular lubrication and adjustment in order to keep functioning properly. If it has stopped functioning, follow the manufacturer's recommendations for periodic lubrication and adjustment.
There are two fuse boxes on this vehicle. On the side of the dash and under the hood. Open the drivers door and on the side of the dash board (where the door would meet it) there is a panel that removes. Under the hood the fuse block is on the drivers side under a plastic cover. It will have a picture of a battery on it. Press in on the two tabs and remove the cover.
The tools are under the second row seats. The hole for the spare tire lowering mech. is above the rear bumper when you lift the tail gate. Put the proper tool down the hole, turn counter clockwise, lowers spare. Reverse to bring up.
I also have a 2004 GMC XUV. My gate would go down but not swing open. In trying to fix it, the gate then refused to go to the flat position.I have removed the cover plate on the gate and found the one of the
solenoids loose from its mounting. Resetting the computer by disconnecting both battery leads and holding them together for ten seconds worked to restore function to the gate going flat, but the swing still does not work. I believe it is a bad solenoid or motor for the bottem left latch pin.