Fuel Filter - Removal & Installation
Before servicing the vehicle, refer to the Precautions Section.
Relieve the fuel system pressure.
Remove or disconnect the following:
Fuel line from the filter using a back-up wrench
Quick-connect fitting from the fuel filter
Fuel filter from the mounting bracket
Install or connect the following:
Fuel filter to the mounting bracket
Fuel line. Torque the fuel line fitting to 20 ft. lbs. (27 Nm).
Quick-connect fitting to the fuel filter
Negative battery cable
Pressurize the fuel system and verify no leaks.
Fig. Exploded view of the fuel filter mounting
Fig. Fuel filter mounting location and component identification
The fuel strainer attaches to the lower end of the fuel pump
module. The fuel strainer is made of woven plastic. The functions of the
fuel strainer are to filter contaminants and to wick fuel. The fuel
strainer normally requires no maintenance. Fuel stoppage at this point
indicates that the fuel tank contains an abnormal amount of sediment or
Hope help with this (remember rated and comment this help)..