Question about 1993 Volvo 240

2 Answers

Turn signal switch has been replace, but turn signal still does not function. Hazard lights do work.

Posted by on

  • tim_mcnally Mar 19, 2009

    Did the trick.Thnks

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Its a bad relay switch. replace this and it will start to work. check the fuse box for blown turn signal fuse as well.

Posted on Mar 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 435 Answers

Check for any blown out fuses.

Posted on Mar 12, 2009

1 Suggested Answer

kirkx
  • 2019 Answers

SOURCE: turn signals and hazard light not working

Sounds like the falsher unit itself is bad.
Looks sort of like a small relay, in the fusebox. Turn signals and emergency lights use the same flasher.

Posted on Jun 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 PT Cruiser loss of turn signals and hazard lights after multi-function switch replacement. I replaced the multi-function switch after noticing the fogs lights staying on when not engaged. When the new...


Perhaps you need to start with fog light problem I am guessing we do not know for sure the switch was the cause, if you can remove them from the equation. When checking for shorts make sure you check light bulbs to,
Next, since the multi function switch was the next step in your problem solving, I suggest you remove the new switch check out all wires to the connector, be especially careful to make sure none of wires have pulled out or partially pulled out of the connector. Let me know when you finish this then we can move on to continuity testing.
My best guess is the connector as it is common to both your fog light and multi-function switch,
Above all don't let it get to you, these problems can be frustrating but they also can be interesting and fun especially with the right assistant

Aug 25, 2013 | 2001 Chrysler PT Cruiser

1 Answer

Hazard lights malfunction


YOU MIGHT HAVE A BURNT OUT RELAY IN FUSE COMPART UNDER YOU CARS HOOD CHECK THAT OUT THRU YOUR CARS MANUAL,IT WILL SHOW YOU WHICH RELAY IT IS?

May 24, 2013 | Cars & Trucks

1 Answer

On my 2004 impala, the front right turn signal doesn't work, (only works with hazard lights). And the back right signal is fast. The signal "clicking" sound is non stop but on the other hand...


If the turn signal filament of the right front park/turn lamp is known to be OK and the hazard switch is in the normal position, the hazard switch or the turn signal/multi-function switch could be defective

Oct 16, 2012 | Cars & Trucks

1 Answer

Turn signals and brake lights will not work


A mechanic would check for voltage at the multi-function switch in the column. Those three circuits go thru the turn signal switch.

Jul 13, 2012 | 2002 Buick Rendezvous

2 Answers

After using turn signal you can still hear clinking, is hazard relay part of turn signal


The hazard switch is also the device that supplies the turn signal "flash". If you continue to hear the noise of the turn signal flashing when the turn signals off than the problem is the turn signal switch. It is grounding The purple wire from the hazard switch which makes the hazard switch think the turn signal is on. The fix for this is to relace the turn signal/multi-function switch. Typically they will start to go bad in stages. Your symptom is the first stage. Eventually either the turn signals or the brake lights will also sto working. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 10, 2012 | 2000 Oldsmobile Alero

1 Answer

Seems that the hazard switch nalfucntion and no


Replace the multi-function switch in the steering column. The 3rd brake light is powered directly off the brake switch while the regular brake lights are wired thru the turn signal switch. Common problem

Jul 20, 2010 | 2001 Chevrolet Blazer

5 Answers

Turn signals are working but the hazzards will not


check the cabel..
check the hazard switch..

if two of them working properly your hazard sould be work...

Nov 04, 2009 | 1998 Ford F150 Regular Cab

1 Answer

1998 Lincoln TC no brake or hazard lights work.


Hazard light switch... They all intermingle in operation.
My ex wifes 96TC was doing the same thing... I could OCCASIONALLY get the hazards to work by turning the hazard switch on/off like 10 times in a row and suddenly it would fix... finally bought a new switch

Sep 14, 2009 | 1999 Lincoln Town Car

Not finding what you are looking for?
1993 Volvo 240 Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Mark Jones

Level 2 Expert

76 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...