Question about 2005 Ford Freestar

Open Question

2005 freestar serpentine belt diagram - 2005 Ford Freestar

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: serpentine belt diagram:

if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach

7f8b868.gif

Posted on Jun 16, 2008

ewashmidas
  • 362 Answers

SOURCE: i need a diagram of 1999 ford contour serpentine belt

8f5f8d7.png
Top one is for a 2.0, with AC, bottom one is the 2.5 with AC.

8ebea63.png

Posted on Jan 24, 2009

ewashmidas
  • 362 Answers

SOURCE: serpentine belt

Here is the one for the 3.9 engine, if you have the other one let me know.
b0ab3d9.png

Posted on Jan 29, 2009

Molson02536
  • 3854 Answers

SOURCE: need a serpentine belt diagram for 2005 ford focus

You should have that diagram on the inside of your hood or on the fan shroud. Good luck

Posted on Apr 08, 2009

  • 1757 Answers

SOURCE: Install Serpentine Belt 2004 Ford Freestar

Click on the following free direct Link. It has the correct Serpentine/Drive Belt Diagram for your 2004 Ford Freestar. You either have the 3.9L or 4.2L V6 Engine. I am not sure what Engine options (AC/No AC, etc.) you have. If this Diagram is not correct: check on the underside of your Hood for the correct Belt Diagram. However the below "How To" remains accurate.

http://www.2carpros.com/car_repair_information/year/2004/make/ford/model/freestar/2004_ford_freestar_drive_belt_routing_diagram.htm

"HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagram on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How often should you change the sepentine belt 2005 freestar?


The belt is your accessory drive belt, no different
than the older V-Belts of the last 120 years

Nothing special ---just a belt

You replace it as you have your whole life

That may be every 6 years, if you turn it over & it
has cracks across it

There is a lot on the internet just on belts
Go to Gates or some belt mfg & educate yourself

Have no idea when a v belt left & a single flat belt
changed names, we lost the entire driving world
& now no one has heard of a serpentine belt

They have only been on vehicles for about 30 years

Oct 03, 2012 | 2005 Ford Freestar

2 Answers

I need serpentine belt routing diagram


Check this on...
Model FREESTAR
Engine V6 4.2L 256ci GAS FI N 2

9_14_2012_3_17_48_am.jpg

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Sep 13, 2012 | 2005 Ford Freestar

1 Answer

I need a diagram to show the location of the serpentine belt. Bear in mind I'm a lady


Hi Lady, did the belt brake? you can go to any parts place to get the belt and the diagram printout but you need tool to move the tensioner so you could put the belt on.

Sep 09, 2011 | 2005 Ford Freestar

1 Answer

Serpentine belt diagram


Hello! See diagram below of Serpentine Belt...


saailer_104.gif



Guru...............Saailer

Aug 30, 2011 | 2004 Ford Freestar

2 Answers

Serpentine belt broke there is no diagram under the hood. I need a diagramm quick car is stranded


Please check all pulleys and repair as necessary before installing a new belt. Thanks for using FixYa.

jturcotte_1402.gif

Apr 01, 2011 | 2005 Ford Freestyle

2 Answers

Install Serpentine Belt 2004 Ford Freestar


Click on the following free direct Link. It has the correct Serpentine/Drive Belt Diagram for your 2004 Ford Freestar. You either have the 3.9L or 4.2L V6 Engine. I am not sure what Engine options (AC/No AC, etc.) you have. If this Diagram is not correct: check on the underside of your Hood for the correct Belt Diagram. However the below "How To" remains accurate.

http://www.2carpros.com/car_repair_information/year/2004/make/ford/model/freestar/2004_ford_freestar_drive_belt_routing_diagram.htm

"HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagram on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 03, 2010 | 2004 Ford Freestar

2 Answers

How do I asjust the serpentine belt on a 2005 ford freestar?


It should not require any adjustment. the right tension is provided by the idler pully. If you want to release the tension for serpentine removal or examination release the tension on the idler pulley in the rear of the motor, spin the nut in the center like you were tightening, and the pressure will be released from the serpentine belt. Reversely, the appropriate tension will be given using the same way when the strap is reinstalled.
Dan

Dec 08, 2009 | 2005 Ford Freestar

1 Answer

Serpentine belt


Here is the one for the 3.9 engine, if you have the other one let me know.
b0ab3d9.png

Jul 23, 2008 | 2004 Ford Freestar

1 Answer

2004 ford freestar serpentine belt diagram


There is a diagram under the hood showing how
the belt fits over all those pulleys. It's either on the
hood itself or on the chassis near the hood pin release pin.
JB

May 31, 2008 | 2004 Ford Freestar

Not finding what you are looking for?
2005 Ford Freestar Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...