Question about Cars & Trucks
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Audi 2.8 Avant burns oil
ur problem is very easy to solve, but its an expensive fix..........($$$)
i dont know how much u know about cars, but every car with en engine(other than the Wankel) which has pistons......the pistons run in the cylinders of the engine block......at the top of the engine is where all the work is done, at the bottom part(just below the pistons), there is a lot of oil to lubricate all of the fast moving engine parts.....when a car burs oil what usually happens is that the oil goes up from the crank case, squesses between the piston and the cylinder walls and gets burned with the gas......and vise versa, at the power stroke the exhaust gasses enter the crankcase and slowly burn the oil that way.......so oil burns every 2 of the 4 strokes......there is 4 strokes in one rpm......idling is about 1500 rpm for ur audi....u do the math.......and the oil slowly burns........when the car heats up the oil burns even faster bacuse the temperature of the oil is already high.......
the pistons are equipped with piston rings to prevent oil from getting into the combustion chamber and exhaust gasses getting into the crankcase.......and the tolerance between the pston and the cylinder is also very important for the car not to burn oil......
tehre are a few ways to fix it.........the best and the most expensive would be to: bore out the cylinders, get new pistons (v6...) and get new rings, and u also might need to get the block and heads faced off(if there is any warpage....the heads are aluminum...).......
this process is called and engine rebuild and could cost u well over $2000 depending on what kind of quality u are looking for.......(its not worth it.....especially for this car, they are very cheap)...
the cheapest way to fix the problem about 75% would be just to get new piston rings.......but as soon as u take those heads off....shaving them is a must if they are warped.........and while u still have them off u might need to do the valves, which could also help the problem......and while u have the pistons out, might as well change them too...right???? so its spendy......
u might also have another problem,......a faulty gasket or o-ring, and the oil might be leaking from that faulty spot right on the exhaust, and might burn the oil that way...........that would defently explain the smell getting into the car.....if this is what is wrong, then the fix could be very easy, fast, and cheap...
if ur burning too much oil, it could be both of the problems at the same time.........plus a few more on top of that......
i hope this helps.........
....now if someone could only help me.......
i know u have posted this a while back, and probably have the problem fixed by now, but if this could help anyone else, then its not a usless waste of time......
Posted on Jun 30, 2009
Tips for a great answer:
Feb 15, 2015 | Audi Cars & Trucks
Jun 11, 2014 | 2009 Audi A4
May 12, 2012 | Audi Cars & Trucks
Sep 18, 2010 | Audi A4 Cars & Trucks
Jan 27, 2010 | 2008 Audi A6
Nov 18, 2009 | 2005 Audi A4
Oct 14, 2009 | 2003 Audi TT
Aug 14, 2009 | 2008 Audi A6
May 26, 2009 | 2001 Audi A4
41 people viewed this question
Usually answered in minutes!