I have a very bad vibration in the front suspention 45 to 50 mph
I have a 95 jeep cherokee. i have replaced all tie rod ends, upper and lower control arms, track bar, and u joints. onley thing left is the ball joints and steering damper shock. could one of these be my problem? what would be a sign that one of them rare bad any info would be greatly appreciated
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had the same problem with mine, if u look on the drivers side there is a bracket bolted to the frame that the drag link hooks too. If this bracket is cracked or broken or bolts have come loose or fallen out, your front end will go crazy after htting a bump at any speed over say 25 mph.
Vibration from about 40-60 mph is usually attributed to wheel balancing, but the onset when you hit a bump seems to indicate play in the steering linkages (tie rods etc) or suspension members and stabiliser bar rubbers but you had that all checked out, that brings us back to the wheel balancing.
you are getting an oscillation .you need to put the front tires on the back and try it again as it could be bad tires.
if it is still the same,put the vehicle on a hoist and check the tire/rim play side to side and up and down.
turn the wheel and check for bearing noise.
common things are wheel balancing,tires,tie rod ends,worn axles and bearings.
Front end need to be checked. checked shocks and stabilizer links. check damper shock.Check the tie rods. They had come loose, causing the wheels have excessive play and vibrate. Be aware that they will not balance tires or give a front end alignment if the tie rods are the culprit. They must be replaced first, otherwise the alignment will only hold until the first time you turn the wheel...which could be 5 seconds after you get in the car. Good luck.