Question about 1992 Ford Ranger

Open Question

92 ford ranger 5 speed 2.3 4 cylinder stuck in 4th gear

There is a line going inside the trans on the left side above the sight panel how does it disconnect? internally. im scared to drop the trans without taking this line aloose

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 508 Answers

SOURCE: 5 speed trans. hung in 4th gear

Can;t be sure on this one except to tell you that you may have a bent or broken shift fork in the tranny. The only way to find out is to remove the shifter from the top of the tranny and see if you can see the fork and move it in and out of gear. If not the next step is to remove the tranny and take it apart. With the information you gave that is about all I can help you with unless there is more info you can give to me.

Posted on May 22, 2009

Ad
  • 3 Answers

SOURCE: I have 92 ranger 5 speed manual transmission 2.3

I had the same problem in my 95 150, I had to kick the shifter to get it into gear and home, the problem was that the shifting forks wore out and slipped out of place, replaced the forks, fixed the problem

Posted on Jul 01, 2009

  • 507 Answers

SOURCE: can I tow a 1985 ford bronco II 4x4 with hubs and

yes if you make sure the front hubs are disengaged(turn little hub releases in middle of the wheel,man trans is ok auto not ok you do need to remove the drive shaft of an auto not man

Posted on Oct 26, 2009

  • 14 Answers

SOURCE: 1994 ford ranger 2 WD auto wont go into gear.

YOU PROBABLY BLEW THE TRANI

Posted on Jan 20, 2010

  • 47 Answers

SOURCE: How do you remove broken spark plug

If it's the porcelain that broke off u should still be able to get it out without doing that had them brake on ranger and explorer and never had to do that just a little patience but still came out with socket hope u get it

Posted on Feb 21, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 FORD RANGER 4.0L 4X4 5SPD STUCK IN 4TH GEAR


The synchronizers are the reason it won't come out of gear. They are damaged and the slide ring won't go over them. You will have to remove the transmission and replace the 4th gear synchronizer. I wish I had a better answer. Hope this was helpful. Good luck.

Feb 19, 2015 | 2004 Ford Ranger

1 Answer

My 92 ranger 5 speed is hung in gear. you can shift it out of gear but the transmission stays in gear. what is wrong?


i had the same problame in my 1989 ranger xlt 4x4 i speed shifted a trans that wasent ment to and my trans got stuck in second and wouldent come out had to take it somewhere to get the forks in the trans replaced turns out i bent the forks and it wouldent come out of second

Jul 11, 2014 | 1992 Ford Ranger

1 Answer

92 ford ranger manual transmision stuck in third gear


Hi Paula,may be your slave cylinder,check your clutch master cylinder's fluid,here's a guide.Here's where to check.

Mar 02, 2013 | 1992 Ford Ranger

1 Answer

Ranger looses power up hill


I am assuming you have the 2.3 liter 4cylinder engine.. This is common in all rangers straight out of the factory with that motor. Your asking alot out of a 4 cylinder truck that also get good gas mileage. they just do not have the capacity to gain speed up a hill. There are a few solutions for you that you could try. If it is a 5 speed manual transmission try to speed up before the hill and when you start losing speed go to 4th gear. this is also good for using as a passing gear as im sure you have noticed you lack power when trying to rapidly accelerate at highway speed to pass. an aftermarket cold air intake combined with a less restrictive exuast will give you anywhere from 5-20 hp gain AND give you more MPG's

Or you can buy a light truck with a v6 or v8 in it. rangers can be equipped with v6 as can chevy s10's. dodge dakotas have the availability of small block v8. this is of course will cost you alot in gas (based on experience) I am a 10 yr mechanic and have owned 2- 4 cylinder rangers a 93 and a 94 my dakota which i still own is a 01

Feb 12, 2013 | 1992 Ford Ranger

1 Answer

What is timing gear setting diagram, for a 1988 2.3L ford Ranger


i have yet to figure out how to transfer pictures on my computer, you can go to either the Dayco or gates belt web sight for these pictures.

Feb 28, 2010 | 1988 Ford Ranger

1 Answer

TRANS. JAMMED,STUCK IN 4TH GEAR


i bet it has been making a growling noise for a while ? Whats going on now is the main shaft bearing has siezed on the shaft and or broke the shaft ,your best bet is to find a used tranny fixing your will cost more then a used one

May 29, 2009 | 1989 Ford Ranger

1 Answer

5 speed trans. hung in 4th gear


Can;t be sure on this one except to tell you that you may have a bent or broken shift fork in the tranny. The only way to find out is to remove the shifter from the top of the tranny and see if you can see the fork and move it in and out of gear. If not the next step is to remove the tranny and take it apart. With the information you gave that is about all I can help you with unless there is more info you can give to me.

May 22, 2009 | 2003 Ford Ranger Regular Cab

1 Answer

5-speed transmission making noise in 3rd and 5th gear


are u sure the alignment (side to side, up and down) of the trans on the bell housingis not out of spec, that will burn the bearings out very quickly.

May 04, 2009 | 1998 Ford Ranger SuperCab

2 Answers

'97 Ford Ranger-Please Help!


IT LOOKS LIKE YOUR FUEL PUMP IS GOING BAD

May 29, 2008 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
1992 Ford Ranger Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...