# Multiply mixed numbers

One whole and 3 fourths times 2 wholes and a half

Posted by on

• Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

• Cars & Trucks Master

1 3/4 x 2 1/2 = 7/4 x 5/2 = 35/8 = 4 3/8 (four and three eighths)

Posted on Apr 24, 2013

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
Good luck!

Posted on Jan 02, 2017

×

my-video-file.mp4

×

## Related Questions:

### Halfway point between 2 cities

run a ruler between the two points and half way will be half the distance of the ruler measurement multiplied by the scale of the map example if the ruler is 6 inches between the cities and half way is 3 inches and the scale is I inch equals 300 miles then 3 inches will be 900 miles ( scale is on the front or back of the map)

Dec 30, 2013 | Cars & Trucks

### Vocabulary copy and complete a whole number such as 22 that has whole number factors

Factors such as 22 cannot be copied to whole numbers due to vocabulary is incomplete and numbers are half.

Sep 01, 2011 | Chevrolet Camaro Cars & Trucks

### I bought a used 2008 mdx. i feel the shift between gears a whole lot. is that a problem with my transmission? my 2008 lexus rx350 feels very smooth, almost cvt, as a comparison.

Sorry, i cant really provide a solution without more details..
But i would say check the transmission fluid (assuming its an auto, since you said when it shifts)
If your transmission fluid is low, add some, then "Cycle" the fluid.
Start in your cars lowest gear (L or 1?) and keep it there for like 15 seconds. Then move up to gear 2, then (3?) or "D", then "N", then "R" then "P" with 15 seconds in between. The whole time your doing this, your holding the brake, and not moving. Your going from the lowest gear you can pick, to park. if your car has the manual mode and doest have "1 / L" or "2", put it in manual mode, keep it in first gear, tap to shift to second, and if it lets you go any higher, go to third, fourth, etc. with 15 seconds in between..
Do this anyways and see if it helps haha.. Good Luck!

Feb 06, 2011 | 2008 Acura Mdx

### V.w.jetta gas eng. timing belt broke ? .shut engine off then wood not start . dealer says needs head work ? bent valves? without disasembling is it possible valves never came into contact with pistons ?

Hi, im afraid i can only give you bad news im afraid, if the engine was running even on tick over when the belt snapped then this would have caused the valves to smash into the pistons as the top half of engine would have stopped spinning leaving at least 2 valves in the out position but what causes the damage is the bottom half of the engine, as their is no weight on the cams to keep them turning they stop at once but the bottom half the crank has a big weight called the fly wheel now when the belt snapped the cams would have stopped dead but the crank would have carried on turning under its own weight and this is what causes the piston or pistons to hit the valves this then causes the valves to bend and all the valves will need replacing and the whole top end rebuilding with new seals and the new valves and valve seats will need grinding in.

how ever as its only usually the top half that gets damaged you could save yourself some time and money by calling a local breakers yard and see if they have a cylinder head lying around or even a whole engine as the cost of rebuilding you head and engine would cost more than it would to get a second hand cylinder head or if you didnt want to take any chances look into getting a whole engine.

look at the costs involved get a quote off you garage for the head rebuilt and new valves, tell them worse case if it needed complete head rebuild with all new valves and valve seats and all the seals get a price on the whole job then ask them how much it would cost if you supplied a working cylinder head or even whole engine then compare the prices and check with some breakers for cylinder head prices or engine and you should find that a second hand head will work out cheaper than having yours stripped and rebuilt with new parts.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks

Nov 22, 2010 | 2000 Volkswagen Jetta TDI

### Trans fluid is low(pink and foamy) must increase the revs. to ingage gear .Now I see coolant coming out the overfow that is mixed with tranny fuid.

your radiator has gone bang.the radiator is devided in two.1 half is coolant and the other half is trans fluid.the trans fluid runs through the radiator to keep it cool before running through the gearbox.whats happened is the shelf inside your rad has collapsed and your coolant has mixed with the trans fluid and gone into your gearbox and vice versa.expensive job,whole strip down sorry to say mate

Oct 15, 2009 | 2003 Dodge Neon

### How do I keep getting gas mixed in with my oil?

Does the blazer run ok? how much gas is in the oil? You will get a certain amount of gas in oil thats normal. If your getting like a half a quart thats not normal. If your getting a lot in the oil its got to be flooding and fouling plugs. Need the whole story in order to help. Just taking a gess hear its the injection system, there was alot trouble with them thru the years like your blazer.

Feb 13, 2009 | 1997 Pontiac Trans Sport

### Firing order of sparkplugs

#6 Firing Order>>> 1 6 5 4 3 2
#3
#2 #2 #4 #6
#5
#4 E N G I N E
#1
COIL PACKS #1 #3 #5
FRONT OF VEHICLE

This is the Whole Set up Coil Pack numbered on coil IF OE
I Hope this Helps and if so PLEASE RATE ME Accordingly
Thank You Very Much

Jan 22, 2009 | 1998 Buick LeSabre

### Um cv joint

a whole lot faster to just replace the whole half shaft

Nov 09, 2008 | 1991 Toyota Camry

### Spark Plug Diagram

yes it doesif you mix it up it wont start the wire are connected one side to the spark plug other side to the ignition coil on those coil you have numbers on them number 1 passager side in the back of the v6 cylinder in the front passager side is number 2 in the back number 3 and so one good luck pierre

Oct 04, 2008 | 1997 Oldsmobile Aurora

### Gas gage does not work

I had the exact same problem. It ended up being the float inside the tank. The float was around \$90 but 2-3 weeks later I ended up replacing the whole fuel unit which came with a new float attached. I should have just replaced the whole unit when I replaced the float. If you still have the original fuel unit, you might want to consider just replacing the whole unit. I hope you find this helpfull.

Sep 20, 2008 | 1994 Dodge Dakota Club Cab

## Open Questions:

#### Related Topics:

35 people viewed this question

Level 3 Expert

Level 3 Expert