Question about 1992 Geo Metro

1 Answer

On a 1992 Geo manual transmission, What positions do the two shift actuators need to be in to put the tranny in neutral

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 20,706 Answers

This m/t has very complex shift linkage.
you should by a real FSM for the car and see the many long pages on topic there,
the words just for the lever are here

  1. At the console, loosen the gear shift control housing nuts and the guide plate bolts.
  2. Adjust the guide plate by displacing it toward the front and rear so that the gear shift control lever is brought in the middle of the guide plate at the right angle.
  3. Once the guide plate is positioned properly, tighten the guide plate bolts to 7 ft. lbs. (9 Nm) and then the housing nuts to 4 ft. lbs. (5 Nm).
"
try a real fsm. you wont be sorry ! I promise !
http://www.ebay.com/sch/i.html?_trksid=m570.l3201&_nkw=geo+metro+shop+manual+1992&_sacat=0
not haynes, real geo books.

Posted on Apr 29, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 1992 geo metro

The check balls I put back in were slightly larger. You should be able to get them from any transmission shop or the Chevy dealer. I got my gasket from the Chevy dealer.

Posted on Aug 15, 2008

  • 9 Answers

SOURCE: 1992 Geo Storm transmission

undo the struts, remover cv joints from the tranny, disconnect the transmission linkages and drop tranny out the bottom of the car

Posted on Mar 18, 2009

  • 31 Answers

SOURCE: someone put Dexron 2 automatic transmission fluid

I do not think it will. Besides, you have no other choice. The longer you keep running it with the a/t fluid, the worse it will be.
I ran my car without fluid in the differential and I really had to pay the consequences.
My A/T differential calls for A/T fluid, but I used manual trans. fluid for a while(15W90). That was 2 years ago, and the car still runs fine. Now i put the A/T reccomended fluid.
As long as you have some type of lubricant where metal grinds metal, ir is way better than nothing.
Note. what I mean is that you should use the reccomended fluid, but if you used another lubricant, it is not the end of the world.
hope this helps

Posted on Jun 28, 2009

  • 850 Answers

SOURCE: 1992 Geo Metro w/ automatic. In drive, won't

may be low on fluid as that wont shift the pistons in the valve body of the transmission
due to no fluid pressure!

Posted on Jul 20, 2009

leedavidian
  • 1420 Answers

SOURCE: what ype of tranny fluid for a geo tracker with

80w 90

Posted on Mar 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 geo metro with automatic transmission will not go out of 1st gear sometimes


my guess is its not electric shifted, (what trans model is it)
so step 2 in the FSM book says.... and i paraphrase
step1 is stall test (my guess passes in 1st and reverse)
step 2, line pressure test?
if that fails, tranny is bad.

Apr 15, 2014 | 1992 Geo Metro

1 Answer

Transmission module


automatic transmission, right?
dont shift , impliese but fails to say, by whom.???
on mine a 5speed manual stick, it can't shift by many a way.
ill take a wild guess and its an A/T
Don't shift.

ok, now I scratched head, do you mean
it stuck in 1st gear.
or did you mean its slipping , and feels like in neutral at all times.
or skips gears?

during these early transitional years, they had 2 transmissions
the newer one is electrically shifted.
and going farther we need to know what trans is really truely there.
we are blind here and cant see what you have.
if your car is a TCM shifted tranny (TCM is tranny brain,puter)
it has scan codes. so dump the tcm error codes.

http://geometroforum.com/topic/5011680/1/#new

or log into alldata.com and read the TCM page.
its not a secret , all metro FSM cover this.
fsm means , the Factory service manual. get one.
or log in.

Mar 24, 2014 | 1992 Geo Metro

1 Answer

My grandson has a 1997 honda accord, 4cyl, replaced auto tranny, now will operate only in first gear when placed in D4. reverse works ok. will not shift out of 1st gear. can u help. thanks


check the instillation of the transmission shift cable, it needs to be adjusted so that the pawl on the trans case has a full range of motion-put the shifter in neutral, and manually put the pawl in the neutral position (disconnect the cable0-then connect the cable again and bolt it into position.

Jan 24, 2011 | 1996 Honda Accord

2 Answers

Can a 1998 4x4 S-10 blazer be dinghy towed?


Yes it can, just place your Transfer Case in Neutral position.
Shifting into NEUTRAL
To shift the transfer case to NEUTRAL do the following:

Make sure the vehicle is parked so that it will not roll.
Set the parking brake.
Start the vehicle or turn the ignition to RUN.
Connect the vehicle to the towing vehicle.
Put the transmission in NEUTRAL (N).
Shift the transfer case to 2HI.
Simultaneously press and hold the 2HI and 4LO buttons for 10 seconds. The red NEUTRAL light will come on when the transfer case shift to NEUTRAL is complete.
Shift the transmission to REVERSE (R) for one second, then shift the transmission to DRIVE (D) for one second, or FIRST (1) for vehicles equipped with a manual transmission.
Turn the ignition to LOCK.
Place the transmission shift lever in PARK (P), or FIRST (1) for vehicles with a manual transmission.
Release the parking brake prior to towing.

Shifting Out of NEUTRAL
To shift out of NEUTRAL:

Set the parking brake and apply the regular brake pedal.
Shift the transmission to NEUTRAL (N) and turn the ignition to RUN with the engine off.
Press the button for the desired transfer case shift position (2HI, 4HI, AUTO 4WD or 4LO).
After the transfer case has shifted out of NEUTRAL the red light will go out.
Release the parking brake.
You may start the engine and shift the transmission to the desired position.
Excessively shifting the transfer case into or out of the different modes may cause the transfer case to enter the shift protection mode. This will protect the transfer case from possible damage and will only allow the transfer case to respond to one shift per 10 seconds. The transfer case may stay in this mode for up to three minutes.

NEUTRAL: Shift the vehicle's transfer case to NEUTRAL only when towing your vehicle.
Good luck and hope this answers your question.

Jan 30, 2010 | 1998 Chevrolet Blazer

3 Answers

I CAN NOT SHIFT THR TRANS INTO NUTRAL SO I CAN TOW IT BEHIND MY MOTOR HOME. IT WILL SHIFT INTO 2H, 4H, 4L


Shifting to NEUTRAL
To shift the transfer case to NEUTRAL, first make sure
the vehicle is parked so that it will not roll:
1. Set the parking brake.
2. Start the vehicle.
3. Connect the vehicle to the towing vehicle.
4. Put the transmission in NEUTRAL (N) or have
the clutch pedal pressed for vehicles with
manual transmission.
5. Shift the transfer case to 2HI.
6. Simultaneously press and hold the 2HI and
4LO buttons for 10 seconds. The red NEUTRAL
light will come on when the transfer case shift to
NEUTRAL is complete.
7. Shift the transmission to REVERSE (R) for one
second, then shift the transmission to DRIVE (D)
for one second or FIRST (1) for vehicles with
manual transmission.
8. Turn the ignition to OFF.
9. Place the transmission shift lever in PARK (P) or
FIRST (1) for vehicles with manual transmission.
10. Release the parking brake prior to towing.

************************

Shifting Out of NEUTRAL
To shift out of NEUTRAL:
1. Set the parking brake and apply the regular
brake pedal.
2. Start the vehicle with the transmission in PARK (P)
or FIRST (1) for vehicles with manual transmission.
3. Press the button for the desired transfer case position
(2HI, 4HI, AUTO 4WD or 4LO).
4. Put the transmission in NEUTRAL (N) or press the
clutch pedal for vehicles with manual transmission.
5. Shift the transmission lever to the desired position.
After the transfer case has shifted out of NEUTRAL,
the red light will go out.
6. A re-engagement sound is normal when shifting out
of NEUTRAL.

Jan 22, 2010 | 2000 GMC Jimmy

2 Answers

91 Tracker wont shift out of first gear.


It sounds like you got an incomplete transmission. The shift shaft shoould have a cup at the end of it to put the shift lever into. I hope this helps.
Thank You,
Roy

Aug 09, 2009 | 1998 Chevrolet Tracker

1 Answer

Will not shift properly


Tranny could be bad or the switch that indicates position not only to the start circuit and the backup lights. and allows the car to be started in neutral. whis swich can bind and may need replaced as it when removed should turn with little or no resistance

Jun 01, 2009 | 1992 Audi 100

1 Answer

1992 Geo Storm transmission


undo the struts, remover cv joints from the tranny, disconnect the transmission linkages and drop tranny out the bottom of the car

Dec 12, 2008 | 1992 Geo Storm

1 Answer

Tranny clutch problems in Geo Tracker


well i have test.

if you have 1inch free play in pedal it clutch slips ,
clutch is bad , or the 89 93 bell housings are diffr.

was disk put in not backwards?
is it a new clutch.




Nov 19, 2008 | 1992 Geo Tracker

4 Answers

1992 geo metro


The check balls I put back in were slightly larger. You should be able to get them from any transmission shop or the Chevy dealer. I got my gasket from the Chevy dealer.

Jul 02, 2008 | 1992 Geo Metro

Not finding what you are looking for?
1992 Geo Metro Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7699 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...