Question about 2008 Peugeot 308 1.6

Open Question

Abs fault codes

Fault code 4040 c040

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 Durango abs light won't go off nothing is wrong no codes are thrown


If that light is on there is a code, you did read this with an ABS capable scan tool? an engine code reader tool will not read the ABS control module

Dec 02, 2016 | Cars & Trucks

1 Answer

How do I obtain a list of the ABS fault codes/ definition and diagnostic procedures


Try this: https://www.youtube.com/watch?v=Tf9ygGnJ-6o But there is not a lot of information on brake systems because of the liability and royalties that are involved.

Feb 25, 2015 | Cars & Trucks

1 Answer

Help!!!cant find what fault code means


P4040 code that is a non specific code that could be either EGR control circuit malfunction or security shut down mode meaning that the security system is shutting off the spark and/or fuel.

Sep 20, 2014 | 2001 Daewoo Lanos

1 Answer

What does fault code 4040 mean?


I wonder if your ABS sensor on one of your wheels is bad. That will make ABS light to come on. Mine was a bad wire connection on my back wheel. on one car I had.

Sep 20, 2014 | 2001 Daewoo Lanos

1 Answer

Mini abs pump motor power supply fault code 5E2D


Check and replace the ABS motor control relay.

Feb 19, 2013 | Mini Cooper Cars & Trucks

2 Answers

I repleaced all 4 abs sensor on my 1996 toyota avalon, but the abs light still on, what could be the problem?


abs light on means some fault codes stored in your car,
toyota it2 can help you clear the code and turn off the light with airbag.

May 16, 2012 | 1996 Toyota Avalon

1 Answer

Abs light stays on I have put new brake line on new calipers because they were sticking causing brakes to get hot, thats all fixed but light still stays on.


the ABS light is on because there has been a fault detected by the ABS module. It has nothing to do with the actual braking system.

The ABS module does a self check every time you start the vehicle. If it detects a problem during that self check the ABS light will stay illuminated and a code or codes for the fault will be stored in the ABS module. Scanning the module will allow you to pull the codes and proceed with diagnosing why the fault is occurring.

The most common source of ABS problems is bad wheel speed sensors or broken wires to the wheel speed sensors. Again pulling the codes from the ABS module will narrow down the possibilities.

Once you now what codes are present post them and we will be happy to assist you further.

Apr 21, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

My engine and abs lights are on. I replaced the rear ABS sensor, then replaced both front speed sensors!!! Now have codes C-1145 and C-1175 and P-1000!!


C1145 is a Right Front wheel speed sensor fault
C1175 is a Left rear wheel speed sensor fault.
P1000 System OBD check not complete since last memorie clear which mostlikely means that the car has not completed the drive cycle to set all monitors for the engine emissions. ( it may just need to be driven a more.
As for the wheel speed sensors if you have replaced them the ABS codes need to be cleared. the engine code reader and clearing tool will not do it. A scanner with ABS capabilities is needed. On some cars if you disconnect the battery and wait 3 mins then re connect the battery, that will clear all codes. then the car needs to be driven to set all monitors for engine emissions.
If you have already cleared the codes. and you have repete same codes for the ABS, you would need to look the wireing over for possible wire rubs that are causing the faults. or the ABS computer itself is at fault.

Apr 01, 2011 | 2002 Jaguar X-Type

2 Answers

Abs fault


Sounds like a steering wheel sensor. Call Mitsubishi back and tell them that, or try a different dealer. Sensor detects the angle of the steering wheel when determining ABS operation parameters (I think)...

Jun 20, 2008 | 1995 Mitsubishi Diamante

1 Answer

Finding a fault code for ABS Brakes


Diagnostic fault codes can only be read through the use of a bidirectional scan tool. There are no provisions for "Flash Code" diagnostics.

May 22, 2008 | 1992 Pontiac Sunbird

Not finding what you are looking for?
2008 Peugeot 308 1.6 Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

scj103

Level 2 Expert

81 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...