Question about Cars & Trucks
It could be as simple as bad gas. These parts can and will go bad. I would first get the codes brought up on the car,before buying any part. Once they are installed most places do not take them back.You would notice rough idle and poor acceleration as well.
Posted on Apr 23, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 19, 2016 | Cars & Trucks
Working of Manifold Absolute Pressure (MAP) Sensor...
--------------These will help.Thanks.
Nov 23, 2012 | Cars & Trucks
Fig. Fig. 3: MAP sensor location-3.3L and 3.8L engines
The PCM supplies 5 volts of direct current to the Manifold Absolute Pressure (MAP) sensor. The MAP sensor then converts the intake manifold pressure into voltage. The PCM monitors the MAP sensor output voltage. As vacuum increases, the MAP sensor voltage decreases proportionately. Also, as vacuum decreases, the MAP sensor voltage increases proportionally.
With the ignition key ON , before the engine is started, the PCM determines atmospheric air pressure from the MAP sensor voltage. While the engine operates, the PCM figures out intake manifold pressure from the MAP sensor voltage. Based on the MAP sensor voltage and inputs from other sensors, the PCM adjusts spark advance and the air/fuel ratio. The MAP sensor is mounted to the intake manifold, near the throttle body inlet to the manifold. The sensor connects electrically to the PCM.
Fig. Fig. 4: Disengage the MAP sensor connector-3.0L engine shown
WARNING When testing the MAP sensor, make sure the harness wires do not become damaged by the test meter probes.
Fig. Fig. 7: Using a digital volt-ohmmeter, test the MAP sensor voltage-3.0L engine shown
REMOVAL & INSTALLATION
See Figures 1, 2, 3 and 4
The MAP sensor is mounted on the intake manifold near the throttle body inlet to the manifold.
Jul 21, 2012 | 1997 Plymouth Voyager
Mar 30, 2012 | 2001 Cadillac Sts
Jan 24, 2011 | 2001 Hyundai Elantra
Oct 28, 2010 | 2003 GMC Envoy Xl
Oct 15, 2010 | 1994 Lincoln Town Car
Aug 06, 2010 | 2000 Oldsmobile Intrigue
Apr 23, 2010 | 2001 Dodge Durango
May 25, 2009 | 2001 Hyundai Elantra
Oct 17, 2017 | Jeep Cars & Trucks
23 people viewed this question
Usually answered in minutes!