Question about Cars & Trucks

Open Question

Mazda rx8 ABS, traction and brake lights

I have a 2004 mazda rx8 with a check engine light on, after 6 gear another 3 lights come on (brake, traction and ABS)

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 79 Answers

SOURCE: 2004 Mazda RX8 Power Steering not working and light on.

I would check your power steering fluid level first. If it's full your power steering pump is bad.

Posted on Jan 19, 2009

Ad
  • 2 Answers

SOURCE: 2000 montana brakes shutter and the abs light and

i had the same problem on my 2000 montana, used a scanner to check for abs code and found right front sensor throwing code, checked sensor and found ok, checked harness from sensor to connection under hood and found wiring circut at the plastic clip where harness hooks to sensor was bad, replaced harness from connector to sensor and problem went away

Posted on Jun 17, 2009

  • 10 Answers

SOURCE: abs and traction control lights coming on

Its the abs sensor, if you encounter an ice patch or snow you won't even be able to stop because the pedal will will push back and make the rip grind noise. If you pull the ABS fuse out, you won't have ABS but you can stop and you won't have the grind noise and back pressure for now. Its safer to not have ABS when the sensor is faulty.

Simon Atari
simonkhpa@yahoo.com

Posted on Aug 06, 2009

emissionwiz
  • 76691 Answers

SOURCE: How do i reset my abs and traction control lights

THESE LIGHTS RESET AUTOMATICALLY WHEN THE SYSTEM IS REPAIRED, AS LONG AS THERE IS A FAULT IN THE SYSTEM THE LIGHTS WILL REMAIN LIGHTED

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abslight stays on. How to fix? This is a2007trailblazer?


First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit

Dec 30, 2016 | 2007 Chevrolet Trailblazer

1 Answer

With traction control on the car shakes when braking and accelerating. ABS light just came on. 2004 Saturn L300


First thing is to check the abs for trouble codes so you know what to start testing.

Jul 25, 2014 | 2004 Saturn L-Series

1 Answer

CHECK ENGINE LIGHT, TCS OFF LIGHT AND THE TRACTION LIGHT are on...


Code 340 is for a problem with the cam position sensor. That would affect the tach and cause the check engine light to be on.
And most all the time the check engine light is on the other warning lights will be also. The Traction control system uses the engine and the ABS system to function. So if there is a problem with the engine, the TCS will be disabled.
The cam sensor and circuits would need to be tested. It could be a wiring problem.

Apr 24, 2013 | 2006 Mazda 6 s

1 Answer

My check engine light is blinking in my 2004 Mazda RX8. The engine was replaced about 6 weeks ago. How can I get it to go off?


take back to whoever put the engine in. i am willling to bet that they crimped the wires on the oxysensor when they put new engine in. this will cause this problem.

Feb 06, 2010 | 2004 Mazda RX-8

1 Answer

How do i get the abs traction control and check engine light off on my 1999 cadillac


You will need to hook the vehicle up to a OBD II scanner and see what code the check engine light is throwing. Your mechanic will help you with this diagnosis and also he can use the scanner tool to shut off the check engine light.. The ABS light indicates a problem with the ABS system and as such the brakes will operate as standard brakes only, NOT ABS... This also your mechanic can help you with to figure out your best course of action.

Jan 25, 2010 | 2008 Mazda Rx-8

1 Answer

How do i reset my abs and traction control lights on my mazda rx8?


THESE LIGHTS RESET AUTOMATICALLY WHEN THE SYSTEM IS REPAIRED, AS LONG AS THERE IS A FAULT IN THE SYSTEM THE LIGHTS WILL REMAIN LIGHTED

Nov 04, 2009 | 2008 Mazda Rx-8

1 Answer

Brake sensor? something else?


You have a faulty wheel speed sensor. This is a magnetic pick up sensor on your wheel bearing hub and it controls your abs. If the car can not sense all 4 wheels then the abs will default back to normal brakes and your traction control will not work. Look at your wheel bearing hubs and check for these sensors. They are on the underside of the car and are black plastic with a wire comming out of it. A piece of gravel may have broken the pick up or the wires to a sensor may be broken as well. To replace it is usually a couple of screws on the hub assembly and a plug to disconnect from your wire harness.

May 27, 2009 | 2003 Mazda Mazda6

1 Answer

I have a 2005 mazda rx8. After running for a few


sounds like it needs to be taken to a madza approved repairer for then to be plugged in for a dianostic annalisis, too many warning lights for one fuse.

Apr 22, 2009 | 2005 Mazda RX-8

1 Answer

Abs , brake, traction control light on in 04 lesabre


check to make sure that all the the bulbs in the rear are working,even the third light

Apr 08, 2009 | 2004 Buick LeSabre

2 Answers

ABS, Traction control and handbrake light is on. Car was running on 3 cylinders previous to the lights coming on. 1999 Mazda SP20 Familia (323)


I have a Mazda Capella (626) 1998 and had similar problem other than it was running on 4 cylinders and the hand brake light was not on and the ANSWER was a speed sensor which is to do with ABS system needed replacing. You can determine which one is broken by putting volt meter over each of them.

Nov 17, 2008 | Mazda 323 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...