Question about 1992 Daihatsu Charade

Open Question

Engine swaP have a G200 Charade 1992 want to know if a applause 1600 bolts in ? charade has a 1300 in it

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Junoon007
  • 1011 Answers

SOURCE: diahatsu charade g200 1996 1.3 liter

Dear Sir/madam,

Valve clearance adjustment must be performed to manufacturer'sspecifications. It is normal that the exhaust valve will have a largerclearance. Adjustment is performed by either adjusting the rocker armor placing shims between cam follower and valve stem. Most modernengines have hydraulic lifters and require only infrequent adjustment.
Valve clearance measurementValve clearance is measured with the valve closed, typically at top dead center between the compression and power strokes. The tappet will be resting on the heel of the cam lobe. A feeler gaugemust pass through the clearance space. The feeler gauge should fit inand out with a slight drag. If the feeler gauge will not fit in, thenthe clearance is too small. If the blade of the feeler gauge fits intoo loosely, the clearance is too large.


AS PER TECHNICAL MANUAL IT IS AS FOLLOW:-
VALAVE CLEARACNCE:- ( HOT)
(CB MODEL )
INTAKE.....00.20mm or 0.0078 inch
EXHAUST..00.20mm or 0.0078 inch
(CL MODEL)
INTAKE......0.25mm or 0.0098 inch
EXHAUST...0.30mm or 0.0118 inch

thanks
good luck


Posted on Aug 31, 2008

Ad
AutoDoc
  • 169 Answers

SOURCE: dihatsu charade torque settings

Peter Watson, what engine size do you have?

Posted on Aug 31, 2008

  • 98 Answers

SOURCE: specs for 1992 3cyl diahatsu charade ignition timing

Timing set with vacuum hoses disconnected and blocked is 5° advanced when flywheel dimple lines up with notch plate.

centrif wieghts 10.5° @ 2800
vacuum two stage 11° @ -320mmHg.

Posted on Feb 19, 2009

SheCelt
  • 7 Answers

SOURCE: 1992 Daihatsu Charade water pump?

Good luck with trying to replace this pump man, I just replaced mine put everything back together and four days of work later the dang thing wont turn over now. lol. as far as the diagram you can find on in google images or at daiclub.com that is where I found mine, and it was free both ways!! Good luck Merry Christmas

Posted on Dec 17, 2009

alicantecoli
  • 22246 Answers

SOURCE: i have a daihatsu charade

not a problem as these little cars are very forgiving ,head bolts 65nm camshaft cap 12nm camshaft sprocket 22nm ,

Posted on Feb 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to connect a 97 pyzar 1.5 ECU to a 93 charade g200 wiring loom need the pin diagram


hi the starlet 1.3 engine is the same of 1.3 of a g200 charade?

Jul 22, 2013 | Cars & Trucks

2 Answers

Daihatsu charade Jan 1994 won't start. Turn key to


have you checked the battery connections, or charge-up battery if dead

Feb 12, 2012 | 1992 Daihatsu Charade

1 Answer

Daihatsu g200 engine head torque settings when replacicg head gasket


not many of these around nowdays ,65lbs for the head bolts

Apr 06, 2011 | 1992 Daihatsu Charade

1 Answer

Thermostat problem Daihatsu Applause a101 engine


The new thermostat will be marked with an arrow,the spring side points towards the motor.

May 25, 2009 | 1992 Daihatsu Charade

1 Answer

My Daihatsu Charades water pump melancholy


Just put a car jack under the sump with a piece of wood between the jack and the sump. Take up the weight of the engine and then release the engine mount if required. Make sure to put some chocks (e.g. brick) behind and in front of the wheels to stop the car rolling.

Jul 26, 2008 | 1992 Daihatsu Charade

1 Answer

How do I remove the water pump in a daihatsu G200 charade with a 1.3 litre .


If you have to sak you need to get a workshop manual. The engine hasn't changed since the late 80's, so a general Gregorys for Charade should be adequate.

Jul 26, 2008 | 1992 Daihatsu Charade

Not finding what you are looking for?
1992 Daihatsu Charade Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...