Question about Cars & Trucks
Sequencer doesnt turn off
Posted by Anonymous on
Tips for a great answer:
Mar 01, 2018 | Cars & Trucks
Jan 18, 2016 | 1993 Pontiac Trans Sport
Sep 21, 2012 | 1995 Chevrolet C1500
Cut the furnace's power source before beginning. Check for a power switch near your furnace or turn off the electrical power supply at the circuit breaker.
2Turn off the gas supply if you have a gas furnace. Look around the furnace for a black pipe. This pipe is the gas line. Check for a valve located near the pipe. Turn off the gas supply by moving the valve so it's perpendicular to the gas line.
Take off the thermostat's old cover by unscrewing the screws that attach the cover to the wall. Some covers don't have screws and simply pull off.
Unscrew the mounting plate and notice the wires.
Place a small piece of masking tape on each wire. Use a felt-tip marker to mark the masking tape according to the wire's screw terminal location. Usually, the wires are marked with letters.
Disconnect the low-voltage wires from the base plate by loosening the screws and then pulling the wires away.
Locate the mounting screws for the base plate. Unscrew them and take off the base plate. Guide the base plate over the wires carefully.
May 31, 2012 | 1997 Toyota Avalon
Oct 27, 2017 | Nissan Altima Cars & Trucks
Jul 24, 2017 | 1999 Chevrolet Venture
Sep 01, 2017 | 1996 Oldsmobile 88
15 people viewed this question
Usually answered in minutes!