Question about 1993 Toyota Camry V6

1 Answer

Linning up timing belt with camshaft

1993 toyota camry v6 3.0

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 160 Answers

Factory belt has belt lines for putting it into time ARROWS POINTOUT toward front of engine

Posted on Mar 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install timing belt on 1993 toyota camry 4 cylinder


1993 Toyota 2.2 you have valve clearance,meaning if you broke the belt driving you just broke a belt and NO VALVE DAMAGE. On the cam gear line that dot on top with the mark at the top if the cylinder head it a little dipple.As for the crank just line up the dots.There is nothing confusing turn one at a time or both at a time.

Mar 09, 2012 | Cars & Trucks

1 Answer

The car is a 4cl 1993 no spark.changed coil and igniter



  • Test the Camshaft Sensor
  • Check voltage between the camshaft position sensor terminals. With engine running, voltage should be greater than 0.1 volt AC and vary with engine speed.
ironfist109_393.jpg



  • Check the Crankshaft Position Sensor.
  • Using an ohmmeter, measure the resistance between terminals. Resistance cold should read 1630-2740 ohms and hot; 2060-3225 ohms.

ironfist109_394.jpg


  • Could also be a timing belt issue.

  • Make sure the distributor is spinning (rotor)




  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 13, 2011 | 1993 Toyota Camry V6

2 Answers

Timing Belt Diagram All About Timing Belt Diagram for a toyota camry 1994


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/toyota/model/camry/1994_toyota_camry_timing_belt_diagram_marks.htm

Mar 22, 2010 | 1994 Toyota Camry

1 Answer

Timing 93 camry 6cyl


Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1993/make/toyota/model/camry/1993_toyota_camry_timing_belt_diagram_marks.htm

Feb 11, 2010 | 1993 Toyota Camry V6

1 Answer

94 Camry w/2200 quit running, rotor doesn't turn while cranking.


Hello.

If the rotor in the distributor is not rotating when you crank the engine, you have a broken timing belt.

The timing belt connects the crankshaft to the camshafts.

The camshaft turns the rotor.

Dec 30, 2009 | 1994 Toyota Camry

1 Answer

Timing marks on exhaust and intake camshafts 1993 toyota camry 3.0


i believe that they have to be facing upward 12o clock i think there should be some arrows on the cams that indicate the position

Jun 09, 2009 | 1993 Toyota Camry V6

1 Answer

Replacement a camshaft 1993 toyota camry v6 how to


public libuary...Chilton or Haynes Manuel.  Coat the new camshaft with STP or grease when installing.  Are you doing both cams?  Usually they wear out from not enough oil reaching them.  You may consider replacing the lifters at the same time.

Mar 12, 2009 | 1993 Toyota Camry V6

1 Answer

1993 Toyota Camry V6 Timing Settings


Get a T belt from toyota. It has 3 white lines on it and and arrow mark. 2 lines are solid and one is broken. Put the arrow facing away from the engine. The cam gears have a dot punched into them near a certain tooth. This is where the solid white lines will line up with. The crank gear will have a dot also. It will line up at 90 degrees from the top, towards the front of the car. This is where the broken line will match up with. With the belt installed with all lines on their proper dots and arrow away from the engine, you valve timming is correct.
Of course you need to remove and compress the tensioner also. I assume you know this already since you didn't ask.

Mar 12, 2009 | 1993 Toyota Camry V6

2 Answers

Need instructions to replace 1993 Toyota Camry Timing Belt


Hi Kmcarroll77

TIMING BELT REPLACEMENT - 2.2L -1993 Toyota Camry

Installation
1.Install No. 2 idler pulley (if removed). Install and tighten bolt to specification. See TORQUE SPECIFICATIONS . Ensure idler pulley is clean and rotates smoothly. 2.Install No. 1 idler pulley and tension spring (if removed). Pry No. 1 idler pulley away from timing belt area as far as possible. Temporarily tighten No. 1 idler pulley bolt. Ensure idler pulley is clean and rotates smoothly. 3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock position.

CAUTION:If reusing timing belt, ensure reference marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation.
4.Ensure all sprockets and idler pulleys are clean. Install timing belt on crankshaft sprocket, oil pump sprocket, No. 1 idler pulley, and then No. 2 idler pulley in sequence. 5.Install timing belt guide with cupped side away from crankshaft sprocket and flat side toward timing belt. Install No. 1 timing belt cover and new gasket. 6.Align crankshaft pulley key groove with key in crankshaft. Install crankshaft pulley. Install and tighten crankshaft pulley bolt to specification. 7.Rotate crankshaft clockwise so cylinder No. 1 is at TDC on compression stroke. Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover. If reusing timing belt, ensure reference mark on timing belt aligns with upper edge of No. 1 timing belt cover. 8.Rotate camshaft, and align hole in camshaft sprocket with alignment mark on camshaft bearing cap. See Fig. 2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt between the crankshaft and camshaft sprockets.
CAUTION:DO NOT rotate crankshaft counterclockwise, as viewed from timing belt end of engine.
9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft sprocket aligns with alignment mark on camshaft bearing cap. See Fig. 2 . If timing marks are not aligned, remove timing belt and reinstall. 11.Rotate crankshaft clockwise 1 and 7/8 revolutions and align crankshaft pulley "0" mark with 45-degree Before Top Dead Center (BTDC) mark on No. 1 timing belt cover. See Fig. 5 . 12.Tighten No. 1 idler pulley bolt to specification. See TORQUE SPECIFICATIONS . Install No. 2 timing belt cover and gaskets. Install and tighten spark plugs to specification. 13.To install remaining components, reverse removal procedure. Install all bolts/nuts on right (timing belt side) engine mount before tightening to specification. 14.On Camry, when installing control rod and bracket on strut tower and right (timing belt side engine mount, tighten bolts to specification in sequence. See Fig. 6 . On MR2, tighten engine
b7619be.jpg
92cabaf.jpg
Hope this helps, don't forget to rate.

Lazaruselite

Feb 25, 2009 | 1993 Toyota Camry V6

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...