Question about Cars & Trucks

Open Question

Replacing philips plusline halogen bulb - Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a light on a 2001 chev cavalier


remove upper air intake splash shield.remove the headlight housing retaining bolts and pull the housing assembly out to access the bulbs.rotate bulb holder counterclockwise to remove bulbs.WARNING YOU NEED TO WEAR CLEAN GLOVE TO REPLACE HEADLIGHT BULBS BECAUSE THEY ARE HALOGEN BULBS. IF YOU TOUCH HALOGEN BULBS WITH BARE HANDS. OILS FROM SKIN WILL CAUSE HALOGEN BULBS TO OVERHEAT BLOW OUT SO WEAR CLEAN DRY GLOVES.

Oct 26, 2012 | Cars & Trucks

1 Answer

How to change headlight 2003the x type Jaguar


look inside owners manual in glove compartment look up bulb replacement in the back index it will show and tell you how to replace headlight bulbs. be sure to wear clean gloves, because headlight bulbs or halogen type bulbs, if oil from hands or skin touch the halogen bulb it will cause halogen light bulb overheat and blow out.you can go by auto parts store when you buy new headlight bulb the salesperson will go out to vechicle and replace headlight bulb for you wont charge you any thing.just charge you for the headlight bulb.

Feb 12, 2012 | 2003 Jaguar X-Type

1 Answer

Installing d2r sylvania lamp in 2001 acura


look in owners manual back index for bulb replacement, it will show and tell you how to replace light bulbs.make sure you wear clean glove when handling halogen head light bulbs because oils from skin will cause halogen bulbs to over heat and blow out, halogen bulbs not cheap.

Jan 03, 2012 | Cars & Trucks

1 Answer

What is the easiest way to change a low beam bulb on a 2007 aura


LOOK IN GLOVE COMPARTMENT FOR OWNERS MANUAL.LOOK IN BACK INDEX OF MANUAL FOR BULB REPLACEMENT OWNERS MANUAL WILL SHOW AND TELL YOU HOW TO REMOVE AND REPLACE BULBS. BE SURE TO WEAR CLEAN LATEX GLOVES WHEN HANDLING THE BULBS BECAUSE BOTH LOW BEAM BULBS AND HIGH BEAM BULBS ARE HALOGEN IF TOUCH WITH HANDS OILS FROM SKIN WILL CAUSE HALOGEN BULBS TO OVER HEAT AND BLOW. HALOGEN BULBS NOT CHEAP THEY COST RANGE $10.00 TO $20.00

Sep 02, 2011 | 2007 Saturn Aura XR Sedan

1 Answer

How do have you change an headlight bulb?


LOOK IN YOUR GLOVE COMPARTMENT FOR THE OWNERS MANUAL. LOOK IN THE BACK INDEX OF MANUAL LOOK UP BULB REPLACEMENT. IT WILL SHOW AND TELL YOU HOW TO REPLACE HEAD LIGHT BULBS. YOU NEED TO WEAR CLEAN LATEX GLOVES WHEN CHANGING HALOGEN BULBS BECAUSE OILS FROM FINGERS AND HANDS WILL CAUSE THE HALOGEN HEADLIGHT BULBS TO OVER HEAT AND BLOW OUT. HALOGEN BULBS ARE EXPENSIVE THEY COST FROM $10.00 - $20.00 BE SURE TO WEAR CLEAN GLOVES WHEN HANDLING THEM.

Jun 18, 2011 | 2003 Oldsmobile Alero

1 Answer

Need to change bulbs in headlights on a 2004 kia amanti


LOOK IN GLOVE COMPARTMENT FOR OWNERS MANUAL.LOOK IN THE BACK INDEX OF MANUAL LOOK FOR BULB REPLACE IT WILL SHOW YOU HOW TO REPLACE HEADLIGHTS BULBS BULBS ARE HALOGEN YOU NEED TO USE CLEAN LATEX GLOVES WHEN HANDLING AND REPLACING BULBS BECAUSE OIL FROM YOUR FINGERS OR HANDS WILL CAUSE HALOGEN BULB TO OVER HEAT AND BLOW AND HALOGENS BULBS VERY EXPENSIVE. THEY CAN RUN PRICE RANGE FROM $10.00 - $20.00 DOLLARS.

Jun 15, 2011 | Kia Amanti Cars & Trucks

1 Answer

How to change a front turn light in a 1996 taurus.


Lamps, Parking Front Lamp-Lamp Assembly, Taurus
Removal and Installation
  1. Remove Headlamp (13008) as outlined.
Headlamp Assembly
Removal and Installation
  1. ani_caut.gif WARNING: THE REPLACEABLE HALOGEN HEADLAMP BULB CONTAINS GAS UNDER PRESSURE. THE HALOGEN HEADLAMP BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR THE HALOGEN HEADLAMP BULB IS DROPPED. HANDLE HALOGEN HEADLAMP BULB CAREFULLY. GRASP HALOGEN HEADLAMP BULB ONLY BY ITS PLASTIC BASE. AVOID TOUCHING GLASS ENVELOPE. KEEP HALOGEN HEADLAMP BULB OUT OF REACH OF CHILDREN.
    Position headlamp switch (11654) and headlamp time delay switch (13736) in the OFF position.
  1. Remove two bolts retaining headlamp (13008) to upper support assembly and loosen pinch bolt. Remove headlamp assembly from vehicle.
  1. Remove park lamp bulb and socket (Sable only) and headlamp bulb and socket from Headlamp Assembly as outlined.


    Headlamp Assembly (Taurus Shown, Sable Similar)


    k24744a.gif
  1. Turn lamp socket and wiring (13410) assembly 1/2 turn counterclockwise and remove from parking lamp (13200) housing.
  1. Remove screw from park/turn signal housing.
  1. Using 1/4 inch drive socket extension and swivel, insert tool through two access holes in upper radiator support. Remove screws from park/turn signal housing.
  1. Remove parking lamp from vehicle.
  1. To install, reverse Removal procedure.


    Front Lamp-Lamp Assembly, Taurus


    k23818a.gif

Nov 19, 2010 | Ford Taurus Cars & Trucks

1 Answer

How to replace headlight bulb on 2002 chevy trailblazer


Headlamp Removal & Installation Bulb Replacement To Remove:
CAUTION
Halogen bulbs contain pressurized gas. Mishandling a bulb may result in the bulb shattering into flying glass fragments.
CAUTION
Make sure to wear eye protection when handling a halogen bulb.
CAUTION
Do not touch the glass of a halogen bulb, only handle the bulb by the base.
CAUTION
Do not allow a halogen bulb to come into contact with dirt or moisture.
CAUTION
Make sure to dispose of a used halogen bulb properly.
CAUTION
Do not allow children to handle halogen bulbs.
  1. Turn the lamp switch to the off position.
  2. Make sure the bulb is cool before changing.
  3. Remove the headlamp assembly from the headlamp panel.
  4. Remove the rear access cover from the headlamp assembly.
  5. Disconnect the headlamp connector.
  6. Remove the bulb from the headlamp assembly by rotating the bulb and socket counterclockwise.
To Install:
  1. Connect the headlamp connector.
  2. Install the bulb into the headlamp assembly by rotating the bulb and socket clockwise.
  3. Install the rear access cover onto the headlamp assembly.
  4. Install the headlamp assembly into the headlamp panel.
Headlamp Assembly Chevrolet To Remove:
Headlamp Assembly (Chevrolet) gm-06-00-1591.gif

  1. Remove the grille from the front of the vehicle.
  2. Release the headlamp assembly retaining tabs.
  3. If equipped, disconnect the headlamp leveling motor connector.
  4. Disconnect the headlamp connector.
  5. Remove the park/turn and side marker bulb sockets from the headlamp assembly.
  6. Remove the headlamp assembly from the headlamp panel.
To Install:
  1. Place the headlamp assembly into the headlamp panel.
  2. Install the park/turn and side marker bulb sockets into the headlamp assembly.
  3. Connect the headlamp connector.
  4. If equipped, connect the headlamp leveling motor connector.
  5. Lock the headlamp assembly retaining tabs.
  6. Install the grille onto the front of the vehicle.

Jul 20, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

How do you replace a low-beam headlight on the 2005 Buick Rainier? I do not even understand how to remove the front grille?


Most vehicles are equipped with Halogen bulbs that are small bulbs that are replaced from under the hood behind the headlight bezel assembly.
They have a twist turn method generally to remove/replace hiowever they cannot have your hand come in contact with the glass bulb as the oils on your skin will in fact reduce the halogen bulbs life as it gets extremely hot burning the oil off the lense shortening the bulbs existence.
Remember to replace the bulb with the proper bulb as you may find two or three different applications of halogen bulbs for the same vehicle, they all have a purpose, they go from bright to brighter to brighter each increase in candle power also increases in price of the bulb, a typical standard priced Halogen is approximately $9.95 and up.

May 08, 2010 | 2004 Buick Rainier

1 Answer

I'm trying to replace my headlights, and cannot figure out how.


If it is like my s60, you need to change the halogen bulb. The bulb assembly is accessible from under the hood. It is held securely in place by three spring clips. Once these clips are removed, you can pull out the assembly, plug in the new halogen bulb and replace the assembly. Be careful not to touch the halogen bulb with your fingers (oils shorten lifespan).

Dec 23, 2008 | Volvo S80 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...