Question about Mitsubishi Raider

Open Question

U1120 Got the U1120 code from my 2007 Raider. Had it reset by the tech who read the code, but his reader couldn't tell me what it was for. I've been looking around but "U" codes aren't as common as "P" codes.

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11121 Answers

SOURCE: p0137 and u1120

P0137 -o2 sensor circuit low voltage [bank 1 sensor 2] sensor is located after cat converter--- possible faulty sensor/broken -damaged-disconnected sensor circuit wiring / plugged cat converter / exhaust leak by sensor --- the U1120 is an undefined enhanced manufactures specific code --wheel distance message --the PCM doesnt receive a vehicle speed message from the anti-lock brake module over the CAN C bus -possible CAN C bus circuit open or shorted / anti-lock brake module damaged or defective / PCM problem notify a dealer may be a recall or a service bulletin on the problem the code seems to pop up on the durangos also might get lucky and be covered under warranty

Posted on Feb 01, 2010

mamai_94509
  • 2 Answers

SOURCE: 2006 dodge dakota code u1120

Time to get it into the dealer, unless you have the proper equipment to diagnose the problem. I won't mess with anything electrical on any vehicle.

Posted on Jul 22, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the answer for U1120 engine diagnostic on 2008 Chrysler Aspen?


Lizzie, U1120 means the PCM doesn't receive a vehicle speed signal from the Anti-lock brake Module over the CAN C bus. You may have to have a good tech. diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
U1120 Engine Diagnostic Code For 2008 Chrysler Aspen
Error Code U1110 and U1120 Chrysler Forum Chrysler Enthusiast Forums
HELP Codes U1120 U0121

Aug 11, 2016 | Chrysler Cars & Trucks

1 Answer

How do i fix a u1120 code?


The Powertrain Control Module (PCM) doesn't receive a wheel distance message from the Anti-lock brake Module or FCM (NON-ABS) over the CAN C bus. One trip fault.

Aug 06, 2014 | 2005 Dodge Durango

1 Answer

2007 Chrysler Aspen


is this a jeep or and aspen. confusing post for sure.

like all 1996 and newer cars in usa;.
do a pcm reset,
drive see if they clear. (see if they self clear) if not , they are REAL.

how to do that , there are 3 ways
  • pull battery , neg lug. (radio codes lost. nav lost, trans relearn happens... shift hard till it learns...
  • better pull pcm memory fuse. (PCM OID FUSE)
  • best, push the reset button on the scan too. rent a tool?
1103 means service light on, so is useless in view of others.

ever search first.
here is ASE guys. pros. 1st hit btw.

http://www.2carpros.com/questions/the-following-codes-appeared-u110e-u1411-u1120-u0101-u110c

or look in your FSM book first. see those words telling what each mean? if sounds like greek, then get car fixed?

Jul 08, 2014 | Jeep Compass Cars & Trucks

1 Answer

Code u1120 Lost Wheel distance what does this mean and how do I repair it?


U1120 means the abs module has lost communication with speed sensors. You'll need a scanner to monitor speed sensors. If problem is in module you won't get communication with scanner. Follow your brake lines from master cylinder to ABS pump/module, on the side of in is a wired connector. Undo it and check for moisture or corrosion. Get some dielectric gel and smear it good on all contacts. And plug back in and retest. Might need new module or speed sensor

Nov 20, 2013 | 2005 Dodge Dakota

1 Answer

2006 dodge dakota code u1120


Time to get it into the dealer, unless you have the proper equipment to diagnose the problem. I won't mess with anything electrical on any vehicle.

Jul 22, 2012 | 2006 Dodge Dakota Quad

1 Answer

Need answer to code # u1120


that is a network code from the manufacturer. the "U" tells me it is a network code, and the "1" after it tells me it is a manufacturer specific code.

U1120-Lost wheel distance message
Set condition: the PCM doesn't receive a vehicle speed signal from the anti-lock brake module over the CAN C bus.

Possible causes:
CAN C bus circuit open or shorted
Anti-lock brake module
PCM"

Looks like you will need to take this to the dealership for diagnostics.

Mar 24, 2012 | 2004 Dodge Durango

3 Answers

I HAVE A 2005 DODGE DURANGO CHECK ENGINE LIGHT IS ON TOOK IT TO AUTO ZONE THEY TESTED IT GAVE ME 2 CODES P0068 AND U1120 WHAT DO THESE MEAN? I WAS DRIVING AND THE CAR JUST STOPPED IT WOULD NOT ACCELERATE...


The code that tells why it died is the P0068 the throttle position sender. It can be bad but they usally last a long time. Other sensers can have troble and pull down the 5 volt reference signal and it'll make it appear that the senser is bad. You can pump the gas very quickly many times and make even a good car set this code. The computer sees a smooth signal from the senser it'll set things back to normal and it'll run just fine. The senser can be teated with an OHM meter center pin of the serser to one or the other outside termial. with the meter making a good conection. the senser should make a smottth change up and down and return to the same value as you started and never go off scale, the other terminal should do the same thing but only in the opasit direction. If it doesn't its bad but a new one stick in on fire it up and run down to the store and have them erease codes telling them you replaced the bad part and need to reset. Even then they sometimes won't do it as some stores have run into troblem with the wrong customer and they don't reset codes anymore. Then you'll have to go to a shop the has a code reader or a scanner to reset the light and or buy your own but about $80 is the cheapest you'll see for a reader that will reset (erease cdes) on OBDII vehicals. good luck

May 21, 2010 | 2005 Dodge Durango

2 Answers

P0137 and u1120


P0137 -o2 sensor circuit low voltage [bank 1 sensor 2] sensor is located after cat converter--- possible faulty sensor/broken -damaged-disconnected sensor circuit wiring / plugged cat converter / exhaust leak by sensor --- the U1120 is an undefined enhanced manufactures specific code --wheel distance message --the PCM doesnt receive a vehicle speed message from the anti-lock brake module over the CAN C bus -possible CAN C bus circuit open or shorted / anti-lock brake module damaged or defective / PCM problem notify a dealer may be a recall or a service bulletin on the problem the code seems to pop up on the durangos also might get lucky and be covered under warranty

Feb 01, 2010 | 2004 Dodge Durango

1 Answer

CHECK ENGINE LIGHT CODE U1120


LOST WHEEL DISTANCE MESSAGE

Oct 16, 2008 | 2005 Dodge Durango

1 Answer

Code u1120


I think it's wrong that you drive an SUV these days. Switch to an hybrid.

Jul 11, 2008 | 2005 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...