Question about 2006 Nissan 1400 Bakkie

Open Question

Nissan 1400 gearbox

My gearbox jams in gear 4

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
tace899
  • 291 Answers

SOURCE: how to remove 1400 Nissan gearbox out

1 Remove battery earth cable.
2 Remove gear shift lever - usually just pulls out.
3 Remove starter motor.
4 Remove bolts holding prop shaft to gearbox final drive, and remove the prop shaft.
5 Remove all bolts around bell housing holding bell housing to engine.
6 Slide gearbox back to slide spigot shaft from clutch plate.
7 Slide gearbox from under vehicle.
Gearbox is now removed out.

Posted on Jan 02, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gearbox keeps jamming . How do I solve?


it needs to be repaired/replaced

May 28, 2015 | Cars & Trucks

1 Answer

How to remove 1400 Nissan gearbox out


1 Remove battery earth cable.
2 Remove gear shift lever - usually just pulls out.
3 Remove starter motor.
4 Remove bolts holding prop shaft to gearbox final drive, and remove the prop shaft.
5 Remove all bolts around bell housing holding bell housing to engine.
6 Slide gearbox back to slide spigot shaft from clutch plate.
7 Slide gearbox from under vehicle.
Gearbox is now removed out.

Jan 02, 2015 | Nissan Cars & Trucks

1 Answer

Picture of internal gear selection on a Nissan 1400 gearbox


you need to know what model year you have and then you porobaly will be best to buy a service manualk for that model and year etc.

Dec 10, 2014 | Cars & Trucks

1 Answer

Car won't get into gear


Be more specific on the symptoms. Just replacing ATF shouldn't jam the gearbox. Why did you replace the ATF, does the shift lever move or not, etc.

Dec 06, 2014 | 1992 Nissan Pathfinder

1 Answer

I have a nissan 1400 champ and is leaking oil on the front part of the manual 5 speed gearbox and the rear part of the gearbox. I have replaced the crankshaft oil seal but i still have oil leaking on


There are seals on the front and rear of the transmission. If the clutch wasn't covered in engine oil, then replacing the crankshaft seal wasn't necessary. Reseal the transmission.

Sep 29, 2014 | Nissan Cars & Trucks

1 Answer

Now do i fix this problem 6 speed gearbox getting jammed in gears on a 2008 xtrail


does it come out of gears with the vechicle off..if so check clutch master for fluid..if it does not still it will be bad shiftercables so replace the bad one or see if the cable came undone...there will be two separate cables

May 16, 2014 | Nissan XTrail Cars & Trucks

1 Answer

Hw to remove gearbox on nissan 1400


I would appreciate guidelines on removing the gearbox of a Nissan 1400, the gear lever intact??

Aug 06, 2013 | Cars & Trucks

1 Answer

Nissan Tiida gearbox problems


hello...
i started hearing a clinching noise in my nissan tiida 2006 transmission...
it was stopping when engine becomes warm.
i changed the oil, but the noise is still there.
as if something's lose in the gearbox...
NEED HELP PLEASE....
thanks

Jan 27, 2013 | 2007 Nissan Tiida 1.6

2 Answers

My nissan 1400 has excessive play in the gearlever and because of that selects the gears inaccurate - the 3 plastic bushes guiding the gearlever are replaced already - what else can i do?


with someone in the car holding the gear as neutral as possible, you'll need to get under the car and look for the linkage cables connecting from the gearbox to the transmission and tighten up any slack

Sep 14, 2009 | 1995 Nissan Pickup

1 Answer

STUCK IN ITS SECOND GEAR.JUMP OUT OF ITS THIRD GEAR.4 SPEED .1400


Usually when a manual shift transmission starts jumping out of gear it's because the synchronizers are worn. The transmission will more than likely have to be repaired and or rebulit by a reputable transmission shop.

Aug 20, 2009 | 1986 Nissan Pickup 4WD 1986

Not finding what you are looking for?
2006 Nissan 1400 Bakkie Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...