Question about Tata Indica
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The light is coming on because ither your tires need to be checked for an under inflated tire, or your pressure sensor inside your tire is bad. Any major tire shop should have a reader to tell if you have a faulty sensor. Your tire pressure that the factory reccomends should be located on your driver's door or door frame on a sticker tag.
Posted on Dec 14, 2008
This will only come on when a tyre has dropped in pressure (not spare). It work on the principle that a tyre with less air has a smaller rolling circumference and therefore a different wheel speed. This is then monitored against other signals from other wheels and determined that a loss in pressure has occured.
If all tyre pressures seem ok, there could be a chance of a small unoticeable leak and would require a bath test. This is when the tyre is dipped in water and bubbles would appear where the puncture is.
Ultimately the system may just need to be reset, or has incorrectly been reset from a tyre change. For this you just press and hold the TPC button (located on the centre console above the gearstick - looks like a flat tyre with an exclamation) turn on the ignition to position 2 and the light will come on re then yellow,go out, come back on yellow. When it comes back on yellow it re-initializing the system. You can let go of the button and after 20 odd seconds the light will go out for the final time, completing the reset.
If the light continues to come on after the reset then you definitely have a puncture somewhere!
Hope this helps!
Posted on May 28, 2009
28 psi minimum but to stop the edges wearing prematurely,inflate to 34 psi and the tyres will wear better,as long as your happy with the ride...shouldnt be too firm
Posted on Oct 22, 2009
Insert key don,t touch brake/clutch pedals
Press start button
Use scroller on top of indicator stalk,push up/down utill you find reset
When you find it press and hold button on end of stalk
You will see reset
This is for 3 series without sat nav,if you have nav re post as it is a different reset
Posted on Jan 22, 2010
Tips for a great answer:
Nov 18, 2016 | Peugeot Cars & Trucks
Jun 06, 2016 | Cars & Trucks
Jan 07, 2016 | Renault Cars & Trucks
Feb 12, 2015 | Cars & Trucks
Jan 06, 2015 | Cars & Trucks
Aug 30, 2014 | 1998 Ford Laser
Apr 03, 2014 | 2005 Chrysler Voyager
Aug 22, 2011 | Volkswagen Polo Cars & Trucks
Oct 11, 2009 | 2002 Mini Cooper
Jun 30, 2009 | Hyundai Motor 1998 Accent
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: