Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
leave ign off with key out 3mins disconnet battery 5 mins reconnett and press lock/ unlock repeatedly until locks cycle through to re sync try this any probs come back to me
Posted on Feb 23, 2009
This is out of my haynes manual
1 disconnect negative battery cable
2 on manual window equipped modesl remove the window crank using a hooked tool to remove the retainer clip.
3 on power window equipped models pry out the armrest switch control plate and disconnect the electrical connections
4 detach the armrest pull handle retaining screw then remove the inside door handle trim bezel
5 insert a wide putty knife, a thin screwdriver or a special trim panel removal tool between the trim panel and the head of the retaining clip to disengage the door panel retaining clips.then remove the remaining door panel retaining screws at the lower edge of the door panel.
6 once all of the clips are screws are disengage detach the trim panel disconnect any electrical connectors and remoe the trim panel from the vehicle by gently pulling it up and out.
7 for access to the inner door remove the door panel support bracket then peel back the watershield taking care not to tear it. it install the trim panel first press the watershield back into place. if necessary add more sealant to hold it in place.
8 installation is the reverse of removal
Posted on Mar 20, 2009
Firstly, if you don't know how...I doubt you can remove it anyway. Take it to your local car stereo installation shop and ask them NICELY to take it off - explain what the problem is (lemme guess the window/lock doesn't work).
Posted on Jun 15, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then just remove the bolts for the mirror
Posted on Aug 14, 2009
Tips for a great answer:
Mar 05, 2016 | Peugeot Cars & Trucks
Feb 26, 2014 | Peugeot 307 Cars & Trucks
May 07, 2012 | 2004 Peugeot 307 SW
Jul 27, 2010 | 2005 Peugeot 405
Jan 22, 2010 | 2005 Peugeot 405
Nov 21, 2009 | 2005 Peugeot 405
Apr 08, 2009 | 2005 Peugeot 405
Oct 17, 2017 | Cars & Trucks
297 people viewed this question
Usually answered in minutes!