Question about Toyota HiAce
Replace fuel sender
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Look first right rear back under fuel tank,< If not, follow fuel lines from fuel tank one main line, one return line, traveling parallel to frame all the way to the motor compartment on front, can be front under right passenger side, first by the filter at the auto parts, that way you will know what to look for
Posted on Jan 21, 2009
Its easy, The only tool you need is a plastic lever tool. Or can be done with big head screw driver (but car for the trims for it can get damaged)
Lever both side vents out, then pull on the trim gently outwards. (long piece from glove box to the end of the radio before the instrumental dash panel) Then pull the main inturmental dash out towards you as well. There may by plugs connected to the front panel. Disconnect that and it exposes the digital meter, I think it then takes only 2 x 10m bolts and the dash is out.
Posted on Dec 06, 2009
you need to remove the rear seat to get to it, just keep in mind the system is preasurized, which in english means you need to loosen the fuel filter in the front of the car first, "THIS IS CRITICAL" if not you will cause gas to get all over the interior. The 96-00 rav4 has a hatch under the carpet, under the seats in the rear. it is a pain to get to, once you remove the seats and carpet you will see it. I would recomend you bring it to a dealer if you dont know what you are doing. But if you are like me and figured what the hell, then you will want to take these steps first...
1. Let the car sit for a long period of time, about 3 hours or more.
2. Have a low amount of fuel, do not have a full tank
3. loosen the gas cap
4. Remove the intake, and the fuse box,
5. Loosen the top nut on the fuel filter under the hood to let out the remaining pressure, do not loose the O rings. This is a good time to replace that filter too, it is about 30 bucks from toyota.
6. open the hatch in the rear,
7. remove the electric feeds from the pump.
NOTE: YOU CAN REMOVE THE POWER FROM THE PUMP AND START THE CAR TO TAKE OUT THE PREASURE, BUT I FOUND IT BETTER TO DO IT MY WAY DUE TO WHAT IT TAKES TO START IT AFTER YOU DO THIS.
8. line the floor of the rav with Plastic, bags, or cardboard, or something.
9. remove old pump
10. install new pump
11. Re attach the fuel filter or install new filter
12. get car back together enough to start it, make sure you have all the lines connected, if not gas will get everywhere...
Good Luck, it was a FUN adventure to do this...
Posted on Aug 26, 2010
Tips for a great answer:
Jan 19, 2017 | Toyota Cars & Trucks
Oct 27, 2016 | Toyota Cars & Trucks
Jan 13, 2016 | Cars & Trucks
Jan 11, 2015 | 2007 Toyota Hi-Ace 220
Jan 10, 2014 | Toyota Cars & Trucks
Feb 02, 2011 | Toyota Pickup Cars & Trucks
Jan 25, 2010 | Toyota Passenger Cars & Trucks
Sep 15, 2009 | 1995 Toyota Tacoma
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: