Question about Cars & Trucks
Show me the diagram how to fit timing belt on the opel twin cam 16 valve engine
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: opel astra headlight adjustment
two screws on each headlight control the direction the headlights are aimed. One screw, usually at the top but sometimes below the headlight, adjusts the headlight up and down. The other screw, located to one side, controls the headlight from right to left. Turning the appropriate screw one direction or the other will change the direction the headlight points.
In order to aim your headlights you need to have a flat vertical surface you can aim your headlights at in front of a level surface on which to park the car. If your driveway is level your garage door is the perfect place to aim your headlights.
The tools you will need for this job are simple. Masking tape is used to mark where the headlights are to be aimed and a screwdriver is needed to adjust the headlights. A tape measure will be necessary to measure the distance of the vehicle to the surface you're using to check the aim and to measure the up and down distances from your marks
Posted on Nov 07, 2009
a renault ,real euro car this one ,no problem here at all ,bring the pistons to TDC the bring back a bit so no piston is at the top ,mark it whilst its at the top with a thin white paint mark on the sprocket ,then back it down a bit .fit head because i sure the head bolts are under the cams ,then fit cams and make sure the inlet and exhaust valves are closed on no1 .no4 should be open with the cam lobes pointing down ,now look for the timing marks,they could be a lug on the cam pointing at something or a slot on the back of the camshaft that has to horizontal with the head ,or even a hole in the front pulley that aligns with a hole indent in the head that has an 8mm bolt push in to hold gear wheel in place -then when you find the marks bring the bottom sprocket back to the mark ,the actual mark is on the flywheel as i remember a special tool with a spring loaded pin to locate flywheel is used ,the fit the belt ,seem to remember a white line here on the belt that aligns with the cams a well ?? look iam old and i forget things ,then make sure you turn engine over twice on bottom pulley with a ratchet to ensure valves clear before starting -
Posted on Jan 02, 2010
Tips for a great answer:
May 11, 2016 | Opel Cars & Trucks
May 27, 2015 | Suzuki Cars & Trucks
Mar 05, 2015 | 1995 Geo Tracker
Feb 10, 2015 | Opel Cars & Trucks
Jul 15, 2014 | 2008 Opel Astra 1.8
Jun 21, 2014 | 2000 Daewoo Nubira
Dec 26, 2013 | Cars & Trucks
Mar 08, 2012 | Holden Vectra Cars & Trucks
Sep 26, 2010 | Daewoo Lanos Cars & Trucks
Mar 20, 2009 | 2000 Daewoo Nubira
50 people viewed this question
Usually answered in minutes!