Question about Cars & Trucks

Open Question

I have 1992 Toyota pickup and when I drive How come when I try to shift into 3rd and 4th gear I have to pull up on the shifter to get it into gear? I recently replaced the retainer bushings but I still have to pull up on the shifter what's wrong can anybody help me pinpoint the problem and help me resolve it Michael Castaneda on Apr 23, 2013

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Ford Ranger xlt manual transmission can"t shift into 3rd and 4th gear


If it grinds when trying to shift, it is the synchronizers. Rebuild. If it pops out of gear. there is a plastic part at the top of the transmission that wears out. It fits around the ball of the shifter. It is two pieces. You'll have to remove the floor plate and pull it up to access the bolts to remove the shifter and replace those plastic pieces.

Aug 04, 2016 | Ford Cars & Trucks

1 Answer

2009 Toyota Camry won't go in gear


only fix is to rebuild trans. or replace clutch packs are out or seal are out

Feb 15, 2013 | 2009 Toyota Camry

2 Answers

I have a 94 Tercel - 4 speed on floor. I cannot put it into 4th gear without it popping out. I was told it needed a new shift cable. This car apparently has 2 cables. One for 1st and 2nd and one for 3rd...


Any car I ever had which had manual shift and was popping out of gear meant that it was time for another transmission. A junkyard can tell you what years and models of toyota transmissions will fit.
Yes they usually have two shifter cables, pull the console and look under your shifter.

Nov 19, 2010 | 1994 Toyota Tercel

1 Answer

93 toyota pickup. 4 cylinder, 5 speed manual 98k. ...


possible selector linkage adjustment , loose or shifted

Jul 02, 2017 | Cars & Trucks

1 Answer

Stick shift


Hi:
The shift pattern is pretty much the same on all 5 speed cars. The top row is the odd numbers, 1-3-5
the bottom row is 2-4-Reverse. The center position is neutral

Here is the key: The shifter is slightly spring-loaded to the center position. If you hold in the clutch pedal and pull the shifter to neutral, and let go of it, it will automatically be lined up in the position, that if you pushed it forward , it would go to 3rd gear, and if you pulled it back, it would go into 4th gear.
This way, to start driving, you start out in neutral, grab the shifter lightly, and push it first to the left, then forward. This is first gear, where you start out. when you want to shift to second, push in the clutch, and keeping left pressure on the shifter, pull all the way back . Here is the easy part, 2nd to 3rd. When you are ready, push in the clutch, and just push the gear shift forward , till it hits neutral, and is spring loaded to the middle. Then you just push it straight forward to 3rd, then next shift, straight back to 4th.
Last gear, 5th: push forward to the neutral row, then Push to the right till it lines up ,and forward to the 5th gear. Reverse should only be shifted into from a dead stop. Find neutral, push the shifter all the way right, then pull back towards you. Hope this helps.
Practice a bunch in the driveway!

Apr 21, 2010 | 2001 Hyundai Elantra

1 Answer

1992 Toyota straight stick pickup. Doesn't want to stay in gear. If i don't hold it in gear, it pops out; does worse in 3rd,4th, and 5th. Do I have serious problems or maybe clutch adjustment


it sounds like the gear stick selector is not workig right its being fouled by something take it out and check the gate that it selects through in the box

Apr 16, 2010 | 1992 Toyota Pickup

1 Answer

I have a 1991 Toyota 4x4 Pickup manuel Transmission that wont stay in 2nd or 4th gear while driving. I tonly has 110,900 miles on it. I feel like the transmision is in good shape. What could be the...


It's the white bushing on the end of the gear shifter can be fixed easily from inside the truck. Just remove gear shift leaver an it's on the end.

Nov 02, 2009 | 1991 Toyota Pickup

1 Answer

Shifting problem with Toyota Paseo


The throttle position switch has some effect on shifting but should effect both hot and cold. It is normal for Toyota vehicles to lock out the overdrive upshift (3rd to 4th gears) until coolant temperature reaches approx 180 degrees f.

Dec 31, 2008 | 1992 Toyota Paseo

1 Answer

Shifter seems to have shifted


just ram the shifter in your booty,.....duh

Dec 31, 2008 | 2003 Toyota Celica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...