Question about 2004 Dodge Intrepid

1 Answer

Cylinder #1 is misfiring. Code indicates open

Cylinder #1 is misfiring. Code indicates open circuit to #1 fuel injector. Replaced injector; checked wiring. With no avail. Any ideas???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

SUSPECT ECU FAULT

Posted on Mar 13, 2009

  • wanderer00_7 Mar 13, 2009

    out of interest - does your vehicle have what they call direct ignition coils or ht leads on coil pack - as in the past ive had this problem in the workshop - on a peugeot and it turned out to be the ht lead (i did change the plug also) for some unknown reason it was causing a short circuit and it only showed up as an injector fault - just a thought - andy

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda odessey engine code p3100


There is no p3100 code!!

I think you copied this wrong. the code is p0301, which is a common one.

The P0301 code means that the cylinder 1 is misfiring or is randomly misfiring. Start by checking for intake leaks an if no leaks are found the next step is to replace the spark plugs on cylinder 1. If the problem persist more tests needs to be done to diagnose problem.

Possible causes
- Faulty spark plug 1
- Clogged or faulty fuel injector 1
- Faulty ignition coil 1
- Fuel injector 1 harness is open or shorted
- Fuel injector 1 circuit poor electrical connection
- Ignition coil 1 harness is open or shorted
- Ignition coil 1 circuit poor electrical connection
- Insufficient cylinder 1 compression
- Incorrect fuel pressure
- Intake air leak

Most likely cause:
Faulty spark plug 1 or Faulty ignition coil 1 (Ignitor coil)

Either are easy fixes. Start with a new spark plug. If the problem continues replace the coil. Pic below. new about $30-$40.





25668053-d0khtfozkoi42lnxngz2bi0n-3-0.jpg

Apr 27, 2015 | 2005 Honda Odyssey

1 Answer

How do ya fix codes p0320&p0340


Ford Crown Victoria, Mercury Grand Marquis, Marauder, Lincoln Town Car 1999-2005
4.6L V8 - Auto 2

Print


Trouble Code: P0201

Cylinder 1 Injector Circuit Malfunction

Possible Causes:


Injector 1 connector is damaged, open or shortedInjector 1 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0202

Cylinder 2 Injector Circuit Malfunction

Possible Causes:


Injector 2 connector is damaged, open or shortedInjector 2 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0203

Cylinder 3 Injector Circuit Malfunction

Possible Causes:


Injector 3 connector is damaged, open or shortedInjector 3 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0204

Cylinder 4 Injector Circuit Malfunction

Possible Causes:


Injector 4 connector is damaged, open or shortedInjector 4 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0205

Cylinder 5 Injector Circuit Malfunction

Possible Causes:


Injector 5 connector is damaged, open or shortedInjector 5 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0206

Cylinder 6 Injector Circuit Malfunction

Possible Causes:


Injector 6 connector is damaged, open or shortedInjector 6 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0207

Cylinder 7 Injector Circuit Malfunction

Possible Causes:


Injector 7 connector is damaged, open or shortedInjector 7 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0208

Cylinder 8 Injector Circuit Malfunction

Possible Causes:


Injector 8 connector is damaged, open or shortedInjector 8 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0219

Engine Over-Speed Condition

Possible Causes:


Engine operated in the wrong transmission gear positionExcessive engine speed with gear selector in Neutral positionWheel slippage due to wet, muddy or snowing conditions


Trouble Code: P0230

Fuel Pump Primary Circuit Malfunction

Possible Causes:


FP or FSV circuit is open or shortedFuel pump relay VPWR circuit openFuel pump relay is damaged or has failedPCM has failed


Trouble Code: P0231

Fuel Pump Primary Circuit Low Input

Possible Causes:


FP or FSV circuit is open or shorted to groundFuel pump relay VPWR circuit open or fuel pump relay failedPCM has failed


Trouble Code: P0232

Fuel Pump Secondary Circuit High Input

Possible Causes:


Fuel pump relay contacts always closedFuel pump ground circuit has high resistanceFuel pump secondary circuit is shorted to powerLow speed fuel pump relay damaged or related circuit problem


Trouble Code: P0297

Vehicle Over-Speed Condition

Possible Causes:


The code indicates the vehicle was driven at very high engine speed (rpm) for too long. The PCM temporarily prohibits high engine speed by disabling the fuel injectors with this code set.


Trouble Code: P0300

Random Misfire Detected

Possible Causes:


Base engine mechanical fault that affects two or more cylindersFuel metering fault that affects two or more cylindersFuel pressure too low or too high, fuel supply contaminatedEVAP system problem or the EVAP canister is fuel saturatedEGR valve is stuck open or the PCV system has a vacuum leakIgnition system fault (coil, plug) affecting two or more cylindersMAF sensor contamination (it can cause a very lean condition)Vehicle driven while very low on fuel (less than 1/8 of a tank)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0301

Cylinder Number 1 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 1Fuel delivery component problem that affects only Cylinder 1 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 1TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0302

Cylinder Number 2 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 2Fuel delivery component problem that affects only Cylinder 2 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 2TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0303

Cylinder Number 3 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 3Fuel delivery component problem that affects only Cylinder 3 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 3TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0304

Cylinder Number 4 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 4Fuel delivery component problem that affects only Cylinder 4 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 4TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0305

Cylinder Number 5 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 5Fuel delivery component problem that affects only Cylinder 5 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 5TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0306

Cylinder Number 6 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 6Fuel delivery component problem that affects only Cylinder 6 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 6TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0307

Cylinder Number 7 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 7Fuel delivery component problem that affects only Cylinder 7 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 7TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0308

Cylinder Number 8 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 8Fuel delivery component problem that affects only Cylinder 8 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 8TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0315

Unable to Learn Crankshaft Variation

Possible Causes:


Inspect the CKP sensor for damageInspect the CKP sensor for debris on the rotorInspect the crankshaft pulse wheel for damaged teethInspect the crankshaft pulse wheel for wobble (loose condition)


Trouble Code: P0316

Misfire in the First 1000 Revolutions

Possible Causes:


Check for CMC DTC P0136, P0156, P0171, P0172, P0175, P1130 and P1150. Repair these adaptive fuel and HO2S codesCheck for any other CMC in memory. Repair these codes first!Ignore P1000 codes that set during KOEO and KOER Self-Test


Trouble Code: P0320

Ignition Engine Speed Input Circuit Malfunction

Possible Causes:


Inspect for problems with an Aftermarket 2-way radioInspect for signs of "arcing" at one or more of the ignition coilsInspect the Profile Ignition Pickup (PIP) unit inside distributor (check for damage or corrosion at the PIP sensor connector)PIP sensor is damaged or it has failed (distributor models)Ignition control module (ICM) has failed (Distributorless models)Trouble Code: P0340

Camshaft Position Sensor Circuit Malfunction

Possible Causes:


CMP sensor circuit is open or shorted to groundCMP sensor circuit is shorted to powerCMP sensor ground (return) circuit is openCMP sensor installation incorrect (Hall-effect type)CMP sensor is damaged or CMP sensor shielding damagedPCM has failedTSB 02-22-1 contains repair information for this trouble code

Nov 16, 2012 | Ford Cars & Trucks

1 Answer

I have a 2002 Jaguar X-type. The check engine light came on and it has been acting jumpy/shaky. I recently took it to be diagnosed and the codes I recieved back were P1314, P1316, P1111, and P0302..What do...


All fault codes can be checked out at http://www.bluejag.co.uk but here are the results for some of yours. You can ignor P1111. Looks like a faulty plug or coil pack cylinder 2

Fault Code:- P1314 Indicates a Power-train fault


The fault is generally due to a problem in the Ignition or Misfire area


Fault Description: Misfire rate catalyst damage -bank 2 NOTE: This DTC will flag only when accompanied by an individual cylinder misfire DTC: P0300 - P0306

Action of ECM:- ECM Default:- Maximum engine speed reduced


After clearing the DTC, complete the Misfire monitor drive cycle
Check for a reoccurrence of fault DTC.


Possible Fault:- Cylinder compression low Worn camshaft / broken valve spring(s) Fuel delivery pressure (low / high) Fuel injector(s) restricted / leaking Fuel injector(s) continuously open Fuel contamination Fuel injector circuit fault(s) (Injector DTCs also flagged) Spark plug failure / fouled / incorrect gap ECM to ignition coil primary circuit fault (Cylinder misfire detected DTC also flagged) Ignition coil failure
Fault Code:- P1316 Indicates a Power-train fault


The fault is generally due to a problem in the Ignition or Misfire area


Fault Description: Misfire excess emission NOTE: This DTC will flag only when accompanied by an individual cylinder misfire DTC: P0300 - P0306

Action of ECM:- none


After clearing the DTC, complete the Misfire monitor drive cycle
Check for a reoccurrence of fault DTC.


Possible Fault:- Cylinder compression low Worn camshaft / broken valve spring(s) Fuel delivery pressure (low / high) Fuel injector(s) restricted / leaking Fuel injector(s) continuously open Fuel contamination Fuel injector circuit fault(s) (Injector DTCs also flagged) Spark plug failure / fouled / incorrect gap ECM to ignition coil primary circuit fault (Cylinder misfire detected DTC also flagged) Ignition coil failure

Fault Code:-
P0302 Indicates a Power-train fault


The fault is generally due to a problem in the Ignition or Misfire area


Fault Description: Misfire detected ?€" cylinder 2

Action of ECM:- none


After clearing the DTC, complete the Misfire monitor drive cycle
Check for a reoccurrence of fault DTC.


Possible Fault:- Refer to P0300 Possible Causes

Aug 25, 2011 | 2002 Jaguar X-Type

1 Answer

Code p1313 p1316 p1111 p0301 means what?


Odd one this to have P1111 as well.

According to my data P1111 is all dtc checks compleated, http://www.bluejag.co.uk however some websites show it as a Intake Air Temperature (IAT) Sensor Circuit Intermittent High Voltage, I'm fairly sure that the latter is incorrect.

check the basics first plugs, leads, corroded ground connections etc then its a bit of a guessing game


As for the other codes

P0301 = Misfire detected - cylinder 1
P1313 = Misfire rate catalyst damage - bank 1
P1316 = Misfire excess emission


Possible causes (as per JTIS):

Cylinder compression low
Worn camshaft / broken valve spring(s)
Fuel delivery pressure (low / high)
Fuel injector(s) restricted / leaking
Fuel injector(s) continuously open
Fuel contamination
Fuel injector circuit fault(s)
(Injector DTCs also flagged)
Spark plug failure / fouled / incorrect gap
ECM to ignition coil primary circuit fault
(Cylinder misfire detected DTC also
flagged)
Ignition coil failure

hope this helps

Mar 13, 2011 | 2002 Jaguar X-Type

1 Answer

2003 Hyundai Sonata with 4 cyl. PO301 error code. Have replaced spark plugs, wires, coil packs, and mass air flow sensor. Replaced air filter due to heavy gas smell. Car was starting after tapping gas 3...


P0301 - Cylinder 1 Misfire Detected.

Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Being you have a heavy gas smell I would look into the injectors. If injector #1 is over producing it can cause a misfire. Test your compression and fuel pressure.

Jan 17, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

PO301 code on Hyundai Sonata. Replaced wires, plugs, coil packs, and mass air flow sensor.


P0301 - Cylinder 1 Misfire Detected.


Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder


Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Jan 17, 2011 | Hyundai Motor 2003 Sonata

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

1 Answer

Giving a 300 and a 301 code where do i start sounds fine when started and then when you put in gear it start misfiring


P0300 - Random / Multiple Cylinder Misfire Detected

Possible Causes:
- Improper spark plug
- Insufficient compression
- Incorrect fuel pressure
- The injector circuit is open or shorted
- Fuel injectors may be faulty
- Intake air leak

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plugs
- Replaced Injectors
- Replaced Ignition Coils

P0301- Cylinder Number 1 Misfire Detected

Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Most likely your issue is with cylinder number 1. Follow the info I have provided and you should be able to solve this issue.

Jan 14, 2011 | 2002 Toyota Tacoma

1 Answer

308 code i change sparks ignition coil same problem


Code P0308 - Cylinder 8 Misfire Detected

Possible Causes:
- Improper spark plug at cylinder #8
- Insufficient compression at cylinder #8
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #8
- Fuel injector #8 may be faulty

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #8
- Replaced Injector #8
- Replaced Ignition Coil #8

Jan 14, 2011 | 2000 Ford Expedition

1 Answer

I have 1996 Dodge Gran Caravan, and it gives me these codes: 27 and 43, what do they mean??


CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit

Feb 03, 2010 | 1996 Dodge Caravan

Not finding what you are looking for?
2004 Dodge Intrepid Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...