Question about 2000 Volkswagen Beetle

1 Answer

My 2002 chevy ventura van data link connector not reading

I took my 2002 chevy ventura warner brothers edition van for an emissions inspection and it failed because they could not get a reading or no communication from the data link connector. is their a fuse connected to this model? if so where would it be located? I looked at the fuses under the hood and none seem to be bad am I looking in the right place for the fuse or could there be something else wrong?

Posted by on

  • yadayada
    yadayada May 11, 2010

    check the dome light fuse and the cigar/power point fuse, if they are blown u loose the data link connector function

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volkswagen Master
  • 22,041 Answers

Why do they need to connect to engine ??? bit backward are we not ---where is the emmision analyser with the sensor up the exhaust ????and the full mechanical check ,brake roller tester ,shock absorber tester ,noise test?? over the pit with the wheels jerked about by metal plates to test ball joints and bearings.hammer to test for corrosion .NOT FORGETTING THE PAPERWORK ???

Posted on Mar 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i pull up the error code on my 2002 chevy venture van warner bro edition 3400 engine


you might need to get a shade tree technician to flash to computer you can even buy the program to go on your laptop to flash the computer yourself

Feb 26, 2015 | Chevrolet Chevy Cars & Trucks

1 Answer

Check engine light came on is still on in my 2002 chev venture warner bros ed.Van P0446 code


Evaporative Emission Vent System Performance. the emissions system on these ventures suck! good luck. It basically means the fumes aren't going where they are supposed to be going and if you live in a county or state that requires emissions testing, it will not pass until you get it fixed. other than that you probably wont see any other problems, you might smell gas but like i said those are just fumes not going to the right place.

Jun 03, 2014 | 2002 Chevrolet Venture Passanger

1 Answer

Lincoln ls computer


You need a professional scan tool to read the data
& road test until all 8 I/M Monitors run, before you go
to inspection

Can't have cylinder misfires,fuel trim out of wack &
such

Most likely you need to get up to speed on Preventative
Maintenance

Mar 04, 2014 | Cars & Trucks

1 Answer

Wgere is the thermostat located on a 200 chevy venture van warner bros edition?


if you stand facing the van follow the radiator hose on the right side the motor where it stop your thermostat is there

Sep 19, 2012 | 1996 Oldsmobile Aurora

1 Answer

1997 chevy s10 zr2 failed emissions


You most likely have a blown Auxilliary Power Outlet fuse. (Happens all the time) The Auxilliary Power Outlet fuse also powers you Data Link Connector (DLC). If the DLC has no power, the computer scanner will not communicate with the engine computer.
Check Fuse #7 (25 Amp) in the instrument panel fuse block. (See diagram)


2_5_2012_10_35_53_pm.gif

Feb 05, 2012 | Chevrolet Cars & Trucks

1 Answer

What does the oxygen sensors look like in a 2003 Chevy Venture (warner Brothers Edition) ? How many are there? Where are they located? Can you show a picture of them in place? How do i replace them? Chevy...


There should be an O2 sensor before and after the catalytic converter on your vehicle, so it will have 2 sensors. You'll need a 7/8" open end wrench or an O2 sensor socket to replace them.

It'll look something like this: http://www.carsteering.com/data/all_images/48-01718.jpg

May 20, 2011 | 2003 Chevrolet Venture Passanger

1 Answer

I have a 1997 Chevy ventura van... Where is the


all you gotta do is follow the top radiator hose to motor,it;s where the hose meets the motor.

Dec 30, 2009 | 1997 Chevrolet Venture

1 Answer

We are unable to communicate with the emissions computer


Yes it is the purple connector. Any generic OBD II scan tool should be able to pull up P codes. Sometimes you will get an enhanced DTC and no code will be given. If there is a shop in your area with a Launch X431 scan tool I'd go to them and have it scanned. Any Auto Zone can scan it for you to. Also I have never had a problem scanning any VW with an aftermarket stereo. Is your MIL on? If it isn't on I don't know why they would want to run a scan for the safety inspection.

Dec 13, 2008 | 2000 Volkswagen Beetle

Not finding what you are looking for?
2000 Volkswagen Beetle Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...