Question about 1996 Toyota RAV4

1 Answer

What are these codes in toyota rav 4 PO171 PO105 PO760 PO 770 PO130 PO171

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 45,653 Answers

OBD=11
code p0171 refers to system to lean---causes ---intake/ exhaust leak---air system---MAF/VAF sensor---fuel pressure/ pump---injectors HO2s
code po105 refers to manifold absolute pressure (MAP) sensor/bar ometric sensor and circuit malfunction causes---wiring---MAP sensor ECM
code p0760 refers to shift solenoid--circuit malfunction causes--shift solenoid---ECM?TCM
code po770 again refers to shift solenoid.
code p0171 again refers to shift solenoid ---performance or stuck off.
code po130 refers to heated oxygen sensor HOS2 1 bank 1-circuit and have the rest checked .malfunction -- causes---heating inoperative---poor connection---wiring--- HO2S. So replace the shift solenoid and oxygen sensor

Posted on Apr 22, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wilsodfarm
  • 986 Answers

SOURCE: code's po171 and p0125

Bank 1 and 2 detecting too lean a condition. Yuck. Per the 1998 official Toyota shop manual for a Sienna, it could be a bad 1) coolant temp sensor 2) bad HO2S (or Fuel/Air sensors) 3) bad mass airflow sensor 4) restricted fuel somewhere (like the fuel filter in the tank! ouch.) First, check to function of the coolant temp sensor. You can pull it and play wiht your stove and boiling water or just buy a Carchip data collector and download the data to your computer to analyze. Second, before you replace that horribly expensive Mass Airflow Sensor, pull it out and *carefully* spray it clean with brake cleaner or an electronic cleaner of some sort. And do NOT touch any of the itty-***** wires inside with anything or you WILL be replacing it. Third, if you have HO2S sensors, you can check the resistance of them using an multimeter to see if they are within spec. I forget exactly but it's something low like 9-12 ohms at 68F. If you have Fuel/Air sensors instead, it's dealer diagnostic time. Fourth, if you suspect fuel pressure or fuel flow issues, I recommend dealer diagnostic time too. My best friend got severely burned (2nd and 3rd degree on 50% of his body) messing with fuel and his VW bug when we were in high school. 25 years later, he is still covered in scar tissue and will be forever.
I hope this helps you

Posted on Oct 06, 2009

  • 120 Answers

SOURCE: 2002 toyota rav 4 / code po420 whats wrong ?

You have a cat converter ie eficiency code. Most shops are willing to sell you a cat converter and make a quick buck. However you can save some major money if you can find out what is wrong. A cat converter doesn't just go bad by itself something causes it to fail. Most likely a bad oxygen sensor or a dirty mass air flow sensor. I would replace the oxygen sensor in front before I replace converter. Reset check engine light and see if light comes back on. If it stays off you just save about 600 dollars. Oxygen sensors cause cat converters to go bad. So fix the cause first, then if you have to replace converter.

Posted on Oct 28, 2010

Mr BrokRench
  • 1623 Answers

SOURCE: location of colour code on 2003 toyota rav 4 chassis/body

Toyota paint codes are can usually be found either under the hood or on the passenger/drivers side door jamb. Most Toyota paint codes are 3 digits long.
If you can't find your color code on the car your local Toyota dealership (parts department) will be able to tell you your code from your registration or chasis number...
Good luck..i hope this helps, please rate me a fixya.

Posted on Aug 12, 2009

  • 1861 Answers

SOURCE: ecu locate in 1998 rav 4?

Under the glovebox, passenger side.

Posted on Dec 30, 2008

  • 65 Answers

SOURCE: toyota rav 4

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Three codes po171-p1250-po660


PO 171 System too lean, PO 1250 PRC Solenoid, PO 660 Secondary Shutter valve.

Sep 03, 2016 | Cars & Trucks

1 Answer

How to reset the radio of 2003 toyota rav 4 after replacing a batttery?


you need a 4 digit code to put in the radio to make it work again. should be with the paper work of the car if not you may be able to get the code from toyota but it may cost a bit. would first remove the radio as some times the code has been written on the radio some were if it has been removed before.

Feb 19, 2014 | Toyota Cars & Trucks

1 Answer

My 2000 has codes po171 po300 po 463 po480 what


P0171 =system too lean (bank 1)
P0300 = multiple misfire
P0463 = fuel level sensor circuit high input
P0480 = cooling fan 1 control circuit

Aug 16, 2013 | 2000 Oldsmobile Silhouette

1 Answer

2005 cavalier no start po300 ,po130 , po171


It is "0" not the letter "O" after the "P"

Jul 11, 2017 | Chevrolet Cavalier Cars & Trucks

1 Answer

Radio codes 2004 rav 4


In my experience, you need to contact the Toyota dealer for these. They should have a record of them--they keep track of them by the VIN

Feb 23, 2012 | Toyota RAV4 Cars & Trucks

1 Answer

Truck has 10 different PO codes


171 and 174 mean not enough fuel po 300 multiple missfire could be not enough fuel 430 can be caused by bad ignition in the cat from not enough fuel // first thing borrow a freinds mass airflow sensor

Jul 06, 2010 | 2005 Ford F 350 Super Duty

1 Answer

My rav 4 2003 model ignition key shell was


Strip the plastic off the head of the key. The key code should be under that part stamped into the metal keys head

Apr 15, 2010 | 2003 Toyota RAV4

1 Answer

2003 Rav 4 has P1135 error code. What is wrong


A/F Sensor Heater Circuit Malfunction (Bank
1 Sensor 1).
You most likely have a bad Air fuel sensor bank 1 sensor 1.

Oct 25, 2009 | 2003 Toyota RAV4

1 Answer

Location of colour code on 2003 toyota rav 4 chassis/body


Toyota paint codes are can usually be found either under the hood or on the passenger/drivers side door jamb. Most Toyota paint codes are 3 digits long.
If you can't find your color code on the car your local Toyota dealership (parts department) will be able to tell you your code from your registration or chasis number...
Good luck..i hope this helps, please rate me a fixya.

Aug 12, 2009 | 2003 Toyota RAV4

1 Answer

Toyota rav 4


I work for Toyota, and I will be glad to provide you with the actual answer:

The RAV/4 product is available in two models, a 4WD model and a 2WD model.
The difference between the two is on the 2WD model, there is no driveshaft going under the vehicle to the rear wheels, and no rear differential. There is no "RAV/2"; both models are called RAV/4's.

There is a lot of common confusuion about how the 4WD works. It is full time 4WD. In other words, it is always in 4WD. It does not "kick in/kick out/automatically engage", or anything like that. It is 4WD all of the time. But, when I say "4WD", that is sometimes mistaken for "all wheel drive", and, in this case, the RAV/4 is not "AWD". What this means is that if you raise the RAV/4 up on a lift, and put it in gear, 1 rear and the other side front tires will spin. True "all wheel drive" would have ALL 4 wheels spinning. This is not the case with the Rav/4. What the RAV does have, making up for not having "True AWD" on the 5 speed model, however, is a switch that locks the center differential in the transfer case, which, when engaged, applies a method of "locking" the 4WD system for maximum traction, but it is still not AWD. The automatic version doe not have this ability.
The last "true AWD" vehicle for purchase was a 1970's International Scout.
If you are considering purchasing a RAV/4, that is a very good investement. They hold their value quite well, and are virtually bulletproof; I do not make any "money" off my RAV/4 customers...
Just "gas station work". Very nice cars. I hope that this helps you, please feel free to comment back with any otherr questions...Glad to be of assistance.
Toyota Ed


Oct 17, 2008 | 2002 Toyota RAV4

Not finding what you are looking for?
1996 Toyota RAV4 Logo

742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...