Question about Cars & Trucks

Open Question

Replace 100 amp alternator fuse in 1997 toyota prado

Cannot remove the bottom casing of the fuse box to get at the fuse

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 92 Answers

SOURCE: ATF Quantity - Toyota Prado 1997 VX

owners manual, dealership parts/ service

Posted on Oct 05, 2008

  • 243 Answers

SOURCE: 1997 Toyota land cruiser prado Rz compass bearing, temperature setting, etc.

I've been resetting pajero's compasses but try to get to an area where you can do 360 degrees turns (empty car parks, ) press the reset button and make 2 complete 360 turns slowly and normally this should set the compass bearing.
Let us know how you get on. Cheers.

Posted on Oct 29, 2008

  • 48 Answers

SOURCE: Removing the 100 amp fuse link in a 1994 toyota corolla

the fuse link is bolted in from the two side in the have to un bolt the whole fusebox so you can raise it and if you look at the sides there are two side panels that can be moved down so you can get a socket or spanner on the two bolts apprx 10mm. undo them and raise the fuse out and put the new one in and tighten up the bolts again. hope this helps.

Posted on Apr 25, 2009

  • 161 Answers

SOURCE: Wiring for Toyota 4 Runner Alternator Fuse

it should be in the underhood fusebox on the right.

Posted on Jun 11, 2009

  • 1077 Answers

SOURCE: how to remove a broken battery fuse 100 amp from

On the sides of the fuse box, two bolts are holding the fuse down in place. I believe you need a 10mm socket to remove the bolts. Then, the fuse should slide right out.

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cant get the alternator fuse out

The alternator fuse is screwed on from the bottom up inside the fuse box. To remove the alternator fuse, you have to unscrew the whole fuse box from the car and on the bottom of the box are more screws to open the box. Once its open you will see one or two little screws holding the alternator fuse in place, easy. Unless you buy the manual for the car, you'll have to break one to pieces trying to get it out, to figure out how to do it, like i did.

Mar 27, 2014 | 1989 Toyota Cressida

1 Answer

Fuse box removal

I removed the top section of the fuse box on a 2007 Buick Terazza Van to get to the bolts to remove the entire box to replace battery; now everything is back together but having difficulty snapping the top of the fuse box to the bottom of the fuse box, is there a technique fo reinstall?

Jan 11, 2014 | 2003 Pontiac Grand Am

1 Answer

2004 power going to fuse box.but only on radio.fuses box from inside of truck.any more fuses under the hood for radio

The Fuse box is located behind the glove box. remove the glove box, then remove the fuse box casing.---------------------------------------------------------------------------------------
digiprog 3

Jan 10, 2013 | Cars & Trucks

1 Answer

How to remove glow plug fuse from holder

there are two 10mm nuts securing the fuse box, remove those and then push the 80amp fuse downwards out of the fuse box (you'll see a clip to the side of the 80amp fuse) once you've slid it out from the bottom of the fuse box you'll see it the wire terminals bolted to the fuse. undo the 10mm nuts and remove. easy as!

Aug 04, 2012 | 1989 Toyota 4Runner

1 Answer

How do i drop the fuse box to replace the bcm

Unscrew the two bottom plastic covers. With a 1/4 ratchet and 5/16 socket remove three black screws holding the fuse panel to it's mounting bracket. one screw is on the left side and two screws are on the right side all facing toward the driver. Unplug the two large wire connectors from the bottom of the BCM. You still cannot remopve the the fuse block but you don't need to. Next remove two screws on the right side of the fuse block with your small ratchet. You will need to have about a eight inch extension to remove the one screw that is located on the top of the left side of the fuse box. I used a mirrow to guide the socket straight up along side the fuse box and was able to remove the screw. It really was not a hard thing to do. When the three screws are removed, the BCM will slide down and seperate from the fuse box. Reverese the procedure the reinstall. Good Luck

Jan 12, 2012 | 1996 Plymouth Voyager

1 Answer

I'm having trouble locating my fuse box on my 2001 ford escape. It says its on the inside of the left side kick panel of my passenger seat yet i see nothing to be removed?

Just in case you didn't already know, a "kickpanel" is the area underneath the dash, also directly underneath the steering wheel. Where your feet go. Hence "kickpanel". \\
If your Escape is a late year '01, then it's possible that the interior fuse box is on the left panel of the driver's foot well. It is covered by a snap off panel that also has the fuse removal tool in the bottom.
Good luck.

Mar 13, 2011 | 2001 Ford Escape

1 Answer

Having trouble pulling out 100A fuse from fuse box thats located under the hood of my 98 Altima.

it has bolts securing it from doesnt just plug into terminals.if i recall correctly if you unbolt the case it is located in and remove plasic cover on bottom you can access bolts securing fuse.hope this helped!let me know.

Feb 13, 2011 | Nissan Altima Cars & Trucks

1 Answer

Where is the fuse box

Hello:One fuse box is under the hood on the passenger side. Remove the cover, key to fuses is on inside of cover. Remove back seat bottom cushion, there will be fuse box under there also

Jan 16, 2011 | 2000 Buick Park Avenue

1 Answer

Remove fuse 120a

You cannot change the fuse the way that you are trying. You need to loosen all of the bolts that holds the fuse box to the inner fender, and then observe the sides of the box, there are tabs that allow the exterior/bottom of the box to be pulled DOWN. After the box bottom is released, the 120 Amp fuse is accessible.
Hope this helps.

Dec 07, 2008 | 2004 Toyota Solara

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides