Question about 2001 Pontiac Grand Prix

1 Answer

Adjusting projector headlights for 2001 grand prix

Help me please....

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do u take tail light off to replace brakelight 2001 grand prix


This web site should tell you. http://www.paulstravelpictures.com/How-To-Stop-Headlight-Tail-Light-Condensation-Guide/index.html

Aug 23, 2011 | 2001 Pontiac Grand Prix

1 Answer

I cant seem to find the bolt used to relieve some tension for my belt in my 2001 grand prix gt. could u please tell me where it is located?


This uses a self adjusting tensioner.This vehicle should have a series II 3.8L.The adjuster is located just under the alternator and slightly to the right.If trying to remove the belt a 15mm headed bolt runs through the tensioner pully turning it counter clockwise should loosen the belt tension.

May 19, 2010 | 2001 Pontiac Grand Prix

1 Answer

2002 pontiac grand prix gt. High beams are dimmer


A loose ground wire to the headlight will keep it dim,Or a headlight adjustment will bring the headlight up.If you can have your headlight turned on a garage door or something at night,and then watch as you change your headlights from low beam to high beam which ones are higher.the last thing to verify is that your high beam headlights are not the plastic lens type that turn dull which cuts the light power.

Dec 31, 2009 | 2001 Pontiac Grand Prix

1 Answer

Ford Focus driving to Spain. What do I do to adjust headlights ?


if you are using projector lenses, have them dimmed.

http://www.articlesbase.com/cars-articles/ford-focus-headlights-1181313.html

as far as adjusting to what point, please be specific in what you want to achieve.

Oct 16, 2009 | 2001 Ford Focus

1 Answer

Can you give me the rear wheel camber spec for a 2001 Pontiac Grand Prix, GT? I am replacing the springs and would like to check & adjust (if necessary) the camber when done.


the only way you can adjust camber is special bolts. you will need a 4 wheel alignment anyhow when you are done and the alignment shop will adjust it, if needed.

Oct 06, 2009 | 2001 Pontiac Grand Prix

2 Answers

I need to know the hight ,,when adjusting the


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 11, 2009 | 2001 Pontiac Grand Prix

1 Answer

Headlights need adjusting


The headlights will have small rods or adjusting screws located near the headlight mounting points. Will probably need a torx socket or screwdriver to adjust. Torx is a 6 point type screw.

Feb 18, 2009 | 1997 Pontiac Grand Prix

2 Answers

Electrical problem in my 2001 pontiac grand prix


I would look for a broken ground or 12 volt buss wire.

Jan 24, 2009 | 1989 Pontiac Grand Prix

Not finding what you are looking for?
2001 Pontiac Grand Prix Logo

510 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...