Question about Mitsubishi Eclipse

Open Question

Diagram on pulley tensioner on 2000 eclipse gt

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 484 Answers

SOURCE: 2006 Nissan frontier 4 cylinder belt diagram + tensioner pulley

They are under the hood or on the front crossmember.

Regards,
matt

Posted on Sep 14, 2009

Ad
rtpflh
  • 546 Answers

SOURCE: how can i tighten the tensioner pulley for my 1996 eclipse

the tensioner pulley is spring loaded to maintain proper tension constantly.if your belt is loose cracked or frayed,replace it.if tensioner isn't working,replace tensioner assembly.

Posted on Sep 25, 2009

SOURCE: How to replace tensioner pulley on 2000 Dodge Neon

Make sure you locate the Serpentine Belt Routing Sticker before you proceed. If not make an excellent drawing and take a GOOD Picture. Do NOT try to just remember how it goes back on Should be a 15mm wrench to loosen tensioner to remove belt. Locate mounting bolts to tensioner and remove, replace with NEW tensioner tighten bolts then use wrench arc torque about 15 degrees should snug it down, reroute belt then using 15mm pull tensioner to either side of belt to install belt in correct route. Remove all tools and body parts from engine bay. Do not start engine if anyone is in the vicinity of engine bay. Belt may fly off if you did not do it right and cause all kinds of shrapnell, if it doesn't fly off, visually inspect belt before starting and after, I would suggest being very careful before during and after starting to insure safety.

Posted on Jan 05, 2010

  • 334 Answers

SOURCE: 2000 plymouth voyager 3.0 L, I need a diagram of

Hello huckstootief,

I hope this helps.

netvan_103.png


netvan_104.png

Regards,
netvan

Posted on Apr 18, 2011

  • 2 Answers

SOURCE: diagram for 2000 mitsubishi eclipse gt where is bank 1 sensor 2

Bank 1 is closest to the firewall, bank 2 is in front of the radiator. Sensor 1's are on top, sensor 2's are on bottom (of the engine). Thus bank 1, sensor 1 would be above the cat closest to the firewall and bank 1, sensor 2 would be after the cat (closest to the muffler). Bank 2, sensor 1 is on top closest to the radiator (you can see it from the front when the hoods open) And Bank 2, sensor 2 is front lower. Hope this helped.

Posted on May 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Mitsubishi eclipse gt


see the diagram attached. God bless you
3163d4ca-779e-46fc-8616-1eb120b57e7d.jpg

Jul 22, 2013 | Mitsubishi Cars & Trucks

1 Answer

Alternator belt loose


they probably gave u the wrong belt... happens all the time

Nov 15, 2012 | 2000 Mitsubishi Eclipse

1 Answer

Serpentine belt diagram for 2000 ford focus


Belt diagrams can be found at most NAPA auto parts stores. The tensioner is located on the front of the engine, usually above the other pulleys that the belt goes around.

Aug 02, 2012 | 2000 Ford Focus

2 Answers

Picture diagram for 2000 eclipse spark plug to distributer


According with engine sizes, check this for 2000 Mitsubishi Eclipse GT 3.0 liter SOHC V-6

zjlimited_399.gif



or 2000 Mitsubishi Eclipse GS 2.4 liter SOHC L4

zjlimited_400.gif

Hope helps.

Apr 29, 2011 | 2000 Mitsubishi Eclipse

1 Answer

Need diagram for power steering belt 97 eclipse 2.0 non turbo


moz-screenshot.pngHere is the diagram for the belt that goes around the Power Steering pulley, tension pulley, and A/C compressor pulley:

pctech1_0.jpg

Jan 25, 2011 | Mitsubishi Eclipse Cars & Trucks

1 Answer

How to replace serpentine belt on mitsubishi diamante 2000


Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2000 Mitsubishi Diamante.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/2000/make/mitsubishi/model/diamante/2000_mitsubishi_diamante_drive_belt_routing_diagram.htm

GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Mar 31, 2010 | 1999 Mitsubishi Diamante

1 Answer

How to replace serpentine belt on 2000 saturn L series not ion


Click on the following direct Link. It has the Serpentine Belt Diagram for the L-Series for your specific engine and options (AC/No AC etc.). It has other additonal diagrams for your future use. It also has diagrams on how to rotate/move the Tensioner Pulley/Arm to loosen and remove the Belt.

Standard Rules to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT OR OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/saturn/model/ls/2000_saturn_ls_drive_belt_routing_diagram.htm

Mar 19, 2010 | 2000 Saturn SL

1 Answer

Change a crankshaft position sensor on a 2000 eclipse


Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!

Mar 11, 2010 | 2000 Mitsubishi Eclipse

1 Answer

I own a 2000 grand am gt v6, and how do i change my drive belt.


you can use belt tool or 3/8 long arm ratched place your tool on tensioner (on pulley side has housing to place your tool in , tensioner between alternator and ps pump one bolt arm and plastic pulley on it stand front of the vehicle and push your tool to firewall to relase the belt tensioner and use other hand and remove belt from the alternator then easly let the tensioner go and remember place the new belt on all the pulleys and leave alternator pulley on last place) front of steering pump reservoir have label that shows the belt assembly make sure new belt in correct position on all the pulleys and push the tensioner and place to belt on correct position and make it tight. before start to vehicle fallow the all belt for make sure no missing pulley and belt is placed straight on all the pulleys no missing lines.

Oct 24, 2009 | 2000 Pontiac Grand Am GT

1 Answer

How can i tighten the tensioner pulley for my 1996 eclipse


the tensioner pulley is spring loaded to maintain proper tension constantly.if your belt is loose cracked or frayed,replace it.if tensioner isn't working,replace tensioner assembly.

Sep 25, 2009 | 1996 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...