Question about Cars & Trucks

Open Question

F18d3 timing cam timing alighnment - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi.i need to know how to set timming on my citroen c5 v6 24 valve exclusive 2007 model.im wondering if the cams have to be aligned to the holes behind them on the heads and then a 8mm tool inserted.


looking at the diagram on autodata and reading the instructions
yes alighn pulleys with holes then insert pins
confirm the pins are inserted all the way

Aug 19, 2016 | Citroen Cars & Trucks

1 Answer

Steering heavy and wont go straight


If i READ THIS RIGHT! yOU MAY NEED AN ALIGHNMENT, or front end parts are worn. Usually when vehicle pulls left or right that means vehicle is out of alighnment. or bad tires,Any garage that does alighnment, can fix it or tell you whats wrong. God-Bless!

Nov 05, 2015 | Cars & Trucks

1 Answer

I have a 93 Buick Skylark GS 3300 Engine Series and my car is cranking but not firing. Diagnostic scan turned up a DTC42 code-spark timing error. The spark plugs are not firing. Replaced crankshaft sensor...


think a timing belt slippage or camshaft position sensor,
deffiantly something there to take a deeper look at.
double check the cams and their alighnment marks that they alighn with TDC if out of sync. nothing will fire right,the coil pack has no ides where anything is for some reason,good luck with this one,Gary

Oct 29, 2013 | 1993 Buick Skylark

3 Answers

Is there any chance of valve damage for a 04 xterra with a broken timing belt


ONLY TIME WILL TELL.ALIGHN TIMIMG MARKS AND INSTALL NEW BELT AND SEE IF IT STARTS, IF IT DOESN'T START YOU SHOULD DO A COMPRESSON TEST THIS WILL TELL YOU IF YOU HAVE COMPRESSON IN THE CYLINDERS

Feb 05, 2011 | 2001 Nissan Xterra

1 Answer

Where are the timing marks on a 2001 Oldsmobile Alero?


Need to Know what SIZE Engine to give this Internal Technical Info to you. Externaly The Crank Sensor picks it up from Harmonic Ballancer and so there are NO EXTERNAL Marks Nor Does the Manufacturer Provide this Info
There is a 2.4L DOHC Engine and there is a PROCEDURE Rather than MARKS on the 2.4L and Requires you to Fallow EACH STEP EXACTLY and in a Very Long Texting . But On the> 3.4L Engine and INTERNALY on the 3.4L the Marks Alighn With #1 @ TDC CAM Mark is STRAIGHT DOWN and the CRANK MARK is SRTAIGHT UP < This is Internal marks on the 3.4L Engine
GM does not provide timing chain timing marks, or information to perform timing chain service without the special tools shown in the timing chain service procedure

Apr 08, 2010 | 2001 Oldsmobile Alero

1 Answer

The procedure to change the cambelt on a 1988 Honda Ballade


SET CRANK PULLY AT TDC TAKE NOTE WHERE THE CAM GEAR MARKS ALIGHN
REPLACE BELT MAKING SURE ALL MARKS ARE IN THE SAME POSITION TO NOT OVER TENSION THE BELT

Sep 01, 2009 | Honda Civic Cars & Trucks

1 Answer

How do i align the timing marks on a 1997 chevy cavalier 2.2l


on both timming gears there is 8mm holes that line up 2 the same size holes in the head, stick a 8mm bolt through to alighn cams, the crank marck pionts staight up. you might have the gears on the wrong cam.

Mar 22, 2009 | 1997 Chevrolet Cavalier

1 Answer

Zx2 2-0 zetec engine new timing belt and drive belt


are you sure you are not 180 out on crank..crank turns twice to 1 turn of cam/s..top dead center #1 cyl. w/ both valves shut-[compression stroke] is what you want to start. some require special alighnment tools to alighn upper to lower''...kev-mn.

Dec 10, 2008 | 1998 Ford Escort

1 Answer

Timing belt replacing


a diagram will help but let me give you a hint you dont need the diagram, once you remove the cover you will see 3 gears the top is the cam gear and if you look at the gear pulley there is a small hole set this at twelve o clock position, the distributor gear which is the middle one should be set in such a way that the rotor of the distributor alighn with number one on the dist cap and the third the last should be set to align the timing mark on the bell housing of the transmission and set it to zero, instal the belt and the car will run fine

Nov 15, 2008 | 1995 Chrysler LeBaron

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...