Question about 2001 Suzuki Esteem

Open Question

I have a 2001 Suzuki Esteem. My brake lights will not stay on. I have replaced the brake light switch and that isn't the problem. Some wires were moved around in the trunk yesterday and they came on and now they're out again, not just one of them, all of them. Does anyone have any clue on how I would pinpoint where the problem is coming from? I do know that it's coming from the trunk, but that's all I know at this point.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 599 Answers

SOURCE: No charge to battery

the starting /charging system is interrelated ....check amp draw of starter...be sure ALL grounds on engine alternator starter battery are clean and tight...also you could have a parasitic electrical leak...disconn neg side to battery and put test light in line..should be faint light for radio and computer..nothing more..if it burns bright you have something drawing power when system is off..pull fuses one at a time to discover where ....good luck

Posted on Jan 13, 2009

onyeredson
  • 404 Answers

SOURCE: check engine light comes on

Hi!
The reason for engine light illumination is to Warn the driver of Faults or upcoming service.
I would be getting the vehicle smartish to a reputable Technician who has OBD analyzing equipment for a check on the faults or service requirement.
There may just be a service due so he can do this or you can do it yourself if competent, he will be able to clear the service/engine light for a fee usually.
Hope this FixYas problem!
Paul 'W'
Onyer~EDosn(:0) {#><U.K.

Posted on Jan 15, 2009

  • 2 Answers

SOURCE: the brake lights on my 2004 suzuki forenza stay on

it is a recall item i saw the technical bulletin. the daytime running lights and headlights is a recall too. i had it donw. lights just stop working.

Posted on Jun 17, 2009

  • 1 Answer

SOURCE: how do i changing alternator suzuki esteem 2001

take it to a mechanic trust me, i had to replace mine after 6 days of trying to figure out how to remove the bottom bolt i took it to a shop if you need to know more email me KRAGAR33@AOL.COM

Posted on Dec 05, 2009

  • 215 Answers

SOURCE: How to check codes on a 2001 Suzuki Esteem

No, the only way to get the engine codes out of this car is to get the codes scaned. Auto zone offers free engine code scans. Hope this helped =)

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a head light unit on a 2001 suzuki esteem passenger side


the whole assembly or just the bulb.?
post symptoms?
i was in a crash.
the lamp is just out, low beam is dead.
like that.???
in Europe the lamps have auto aiming , one more little possible.

this is covered ijn the operators guide, lost that, little gem?
open glove box. extract the guide, read that, RTM

or buy it for $4 bucks?
https://suzukipitstopplus.com/Products/1026-2001-2002-esteem-owners-manual.aspx

Oct 29, 2014 | 2001 Suzuki Esteem

1 Answer

Reverse lights


the car comes with 2 transmission.
a/t and m't (auto or stick)
the a/t uses an expensive PRNDL switch (aka. neutral switch)
the m/t uses reverse switch.

both are located on the transmission.
the m/t has 2 wires)
the A./t about 6. (not 2)
with those 2 facts, you can find it, counting wires.

next time post trans type, so we dont have to guess.

Nov 09, 2013 | 2000 Suzuki Esteem

1 Answer

Brake light relay?


If it were a grounding problem then they wouldn't work at all so that's out. Sounds like the brake sensor isn't installed correctly

Aug 18, 2012 | 2001 Volkswagen GTI

2 Answers

1989 GMC SIERRA BRAKE LIGHT IN DASH STAYS ON [CHECKED FOR AIR IN BRAKE LINES-NO AIR] [BRAKE FLUID LEVEL GOOD] [BRAKE PEDAL PULLED UP] IN DASH BRAKE LIGHT STAYS ON


Check your emergency brake. Make sure it isn't partially pressed in. Try unplugging the switch to the emergency brake and see if the light goes out; if it does the switch is bad.

Jun 24, 2011 | 1989 GMC Sierra

1 Answer

1998 Esteem: I have a 1998 Suzuki Esteem, occasionally when I h...


Sounds like a short circuit in the brake light loom. Maybe in the light cluster.

Jun 08, 2017 | 1998 Suzuki Esteem

1 Answer

My brake lights do not come on when i press the brakes. i have changed the switch for the brake lights but I still get nothing, which wire do I need to change because the brake light wire on my 2000 Esteem...


If you have a meter.... check the bulb socket for 12V DC with someone applying the brake or watch for a 12V DC pulse on the meter when the meter leads are on the socket contact with the emergency flashers on. (+) lead to socket contact and ( - ) lead to chassis ground. If you have the 12V DC on the socket contact then there is a problem with the chassis ground wire.
The brake light socket has 2 terminals. One is for the tail light 12V DC power when the headlights are on and the other one is 12V DC only when the brake lights are supposed to be on. (i.e pulse hazard or brake applied light on)

Also check the BRAKE light fuse in the fuse box located on the front of the left kick panel wall drivers side with a black cover. (4" x 2.5") There is also a fuse and relay box on the left side of the engine compartment. (4" x 7")

The wire color connected to your NEW brake switch that leaves the switch for the tail lights is the same color on the rear of the car and terminates at the tail light assy quick disconnect connector.

Thanks for using FixYa.

Kelly

Apr 23, 2010 | 2000 Suzuki Esteem

1 Answer

How to check codes on a 2001 Suzuki Esteem


No, the only way to get the engine codes out of this car is to get the codes scaned. Auto zone offers free engine code scans. Hope this helped =)

Mar 04, 2010 | 2001 Suzuki Esteem

1 Answer

2001 suzuki esteem check engine light flashing


there may be frozen valves forevap system if its that cold there get a diagnostic check done at any part store and they will suply you with trouble code and a deffinition of what the code is

Jan 12, 2010 | 1996 Chevrolet Monte Carlo

2 Answers

Can't get my daytime running lights to turn of on my 2000 suzuki esteem


Check your e brake lever switch, if the car thinks the e-brake is on the day time running lights will stay off.

Jan 08, 2009 | 2000 Suzuki Esteem

Not finding what you are looking for?
2001 Suzuki Esteem Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...