Question about 2002 Chevrolet S-10

Open Question

2002 Chevy S10 Pickup won't engage in four wheel drive high

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1993 Chevy 1500 pickup 4-wheel drive

I replaced the malfunctioning “thermal actuator” with the “Warn” Vacuum actuator setup, it’s been working great for about 7 years now, simple install, if I remember correctly, it was about $150.
That’s what engages the front diff into 4wd.

Posted on Nov 25, 2008

  • 124 Answers

SOURCE: chevy s10 4 wheel drive will not engage

There is a vaccuum operated switch located on the transfer case that sends vaccum to the accuator that pulls a cable that locks the front end in. Check for vac coming in and out of this switch if no vac out replace it. This switch is a very common problem. You can find them at most parts stores in the help section #49315. please rate.

Posted on Dec 08, 2008

  • 1509 Answers

SOURCE: 1998 Chevy S10 front axle will not engage when put into 4 wheel

Normal thing that happens as long as onone (worked) on it, is the vacume hose going to the engage sevevo under the battery box has fell of on either end or is brocken on the way there. Then the once or now leaky battery acid ate up this same servo. then the cable going to the front axel breaks sticks falls off or even someone needing one climbed under your truck while parked somewhere to get one to replace their brokeen one now you don't have one then theaxel engage arm or gearset is damaged

Posted on Aug 16, 2009

dennymulford
  • 1055 Answers

SOURCE: 1978 Chevy pickup four wheel drive shifter will

linkage is bent or fork is broke in transfer case

Posted on Feb 24, 2010

  • 1 Answer

SOURCE: i have a 2002 chevy S10 4x4 pickup. My problem is

2002 chevy s10 4 door 4x4 4 wheel drive wont engage

Posted on Nov 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 S10 4 wheel drive wont engage


have you tried some of the chevy 4x4 forums. they have diagrams and many work on these vechiles. i have received good info from them before

Jan 30, 2015 | 2000 Tracrac Chevy S10 Pickup - 7 long bed...

1 Answer

4 wheel drive won t engage


Vacuum hoses and connection under vehicle on transfer case. Sometimes vacuum switch goes bad also. Worst case, the control module for the 4wd

Dec 31, 2013 | Cars & Trucks

1 Answer

Four wheel drive problems


It sounds more like a bad actuator/valve

Dec 09, 2013 | Cars & Trucks

1 Answer

2000 chevy blazer passenger front wheel noise


driving in 4wd on hard surfaces produces what is known as torque wind up as the wheels cannot slip so the variations of distance going around corners , dips in the road etc place considerable strain on the transmission , transfer case , drive lines and diffs
that is why it is difficult to get out of 4wd unless you drive with 2 wheels on a grass verge to relieve that torque wind up
as for the noise check wheel bearings and the cv ("U") joint at that wheel as there appears a proble where the dog teeth in the hub are not engaging properly or are jumping out of engagement

Mar 26, 2017 | 2000 Chevrolet Blazer

1 Answer

What is the horible noise when four wheel drive is engaged?


problem cv joints and or "U" joints and or worn slip joints in drive lines
no make model year listed so impossible to know exactly

Mar 27, 2017 | 2002 Nissan Xterra

1 Answer

2000 chevy s10 four wheel drive wont engage


it has vacumn the cable moves but does not engage the forks to slide the washer that connect the 2 gears now what

Jun 22, 2010 | 2000 Chevrolet S-10

1 Answer

My four wheel drive doesnt work in my 87 s10 blazer , like when i put it in park to put it in gear the shifter on the floor goes into gear but the four wheel drive doesnt turn on ? is there any fuses or...


sounds like either a fuse or the do u have locking hubs that need to be engaged also when using 4 wheel drive there is actually only 2 wheels turning usually passenger front and driver back sometimes u also have to drive backwards to engage and also disengage 4 wheel drive finally it may be a transfer case problem check drive shafts and u joints make sure they are engaged

Oct 23, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

Four wheel won't engage


Theres a vacume dash pot under the battery box. It pulls a cable that engages the front diff. Put the vacume line and you'll have lights and four wheel drive. (it happened to my blazzer)

Dec 29, 2008 | 1991 GMC C1500

1 Answer

1993 Chevy 1500 pickup 4-wheel drive


I replaced the malfunctioning “thermal actuator” with the “Warn” Vacuum actuator setup, it’s been working great for about 7 years now, simple install, if I remember correctly, it was about $150.
That’s what engages the front diff into 4wd.

Nov 24, 2008 | 1993 Chevrolet C1500

Not finding what you are looking for?
2002 Chevrolet S-10 Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...