Question about 1993 Buick Park Avenue
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: turn signal flasher
there are 2 one for the hazards and one for the blinkers
the hazards are under the dash about where your right knee would be you have to remaove the lower portion of the dash (2 screws)
the blinkers are way up under the dash by the parking brake.....way up you have to get on your back and move wires to see it if the flasher still works a little you can hear it.....again its way up there but you dont have to remove anything to get to it.
I just changed mine it took 10 times as long to find it as it did to replace it
Posted on Sep 10, 2008
You have a plastic check valve with rubber hoses that run across the top of your motor. replace that check valve. I had the same problem. You can get one at any auto parts place.
Posted on May 20, 2009
For most common location, open hood and look near cowl for a plug near the air conditioning box just forward of the windshield wipers. It should have several wipers and the resistor itself protrudes downward into the box held in place with two screws. Screws have 7mm, 8mm, or 1/4 inch hex head.
If not: look near blower itself under the dash on the passenger side. The resistor should protrude upwards into the HVAC housing near the blower.
Posted on Sep 17, 2009
Testimonial: "That was quick! Thanks! Perhaps in passenger compartment versus engine compartment!"
Same thing happened with my 95 park avenue a few weeks ago. I talked to a guy I know who is a GM mechanic and he says that the module (the thing on the dash with all the buttons and the temperature display) is broken and needed to be replaced. These computer modules just get funny with age and eventually have to be replaced. You can find one pretty easy on ebay motors. It's not hard to replace, you just have to take apart the dash and take out the old module and put the new one in. Hope this helps!
Posted on Apr 14, 2010
Tips for a great answer:
Mar 07, 2017 | 1998 Buick Park Avenue
Nov 15, 2016 | 1998 Buick Park Avenue
May 26, 2014 | 1995 Buick Park Avenue
Jan 08, 2013 | 1995 Buick Park Avenue
Nov 09, 2012 | 1994 Buick Park Avenue
Jun 19, 2012 | 1995 Buick Park Avenue
Nov 11, 2011 | 1992 Buick Park Avenue
Jan 13, 2010 | 1994 Buick Park Avenue
Sep 28, 2009 | 1995 Buick Park Avenue
Sep 17, 2009 | 1995 Buick Park Avenue
Jun 30, 2014 | 1993 Buick Park Avenue
95 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: