Question about 1999 Ford F150 Regular Cab

Open Question

1999 f150 fog light fuse location - 1999 Ford F150 Regular Cab

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dddsouve
  • 64 Answers

SOURCE: lights

Hi!
Check the park light switch may be the contacts are worned or need cleaning.

Posted on Dec 20, 2008

66 chrgr
  • 1011 Answers

SOURCE: where is the fuse box located on a 1999 ford f150

there are two one under the hood driverside and one under the dash on the drivers side

Posted on Feb 22, 2009

  • 10 Answers

SOURCE: 1997 ford f150 fog lamps not working. Lamps new, fuse good

retract my prior statement. There is a seperate relay. It is close to the head relay. Relay has black/white wire and yellow that runs into the switch. Good luck.

Posted on May 03, 2009

moparownr
  • 667 Answers

SOURCE: FUSE LOCATION

inside fuse box number 17, let me know if this helps

Posted on Jun 17, 2009

sscullys
  • 984 Answers

SOURCE: how to factory wire fog lights on a 2000 ford

This is a common problem on 97-00 MY trucks, regardless of the trim level ( XL, XLT, Lariat ).

If you install the fog lamp fuse in the BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) Fuse # 9 ( 15 A fuse ) and jumper the normally open contacts in the fog lamp relay socket ( see diagram below ) the fog lamps should illuminate ( to confirm what you have doing on ).
8491ddd.jpg
The problem usually is the main headlamp switch to the BJB is not in place ( this is the yellow wire from the main headlamp switch connector to the relay socket pin #1 ).
One easy route is to make an aux lighting relay & harness, or purchase one online. With this, you can cut the factory ends and attach them to the harness you purchased. There is an air inlet next to where the steering wheel column runs through the firewall. This would give you an easy route to the fog lamp switch. The fog lamp switch, you can buy the factory one, and change the yellow wire from the connector to your added relay, or just add a switch for this function.
This will give you an idea of what the DIY relay and harness would look like.
5954a15.jpg

Hope this helps, more than confuses at this point

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fog lights 03 gmc envoy slt not working. How can i located fuse without


There is also a relay ! FOG LP fuse # 11 10 amp location , under hood in the engine bay fuse / relay box . FOG LP relay #39 .

RR FOG LP relay #45 , RR FOG fuse #5 10 amp , location rear fuse box .
The fog lamp relays are computer controlled , by BCM

Mar 27, 2017 | 2003 GMC Envoy

2 Answers

My fog lights are not working, the relay is fine but not sure where the fuse is? Don't want to buy a service manual for this one simple thing. It does not tell you in the manual.


I have a 2004 f150 xlt triton. I couldn't figure out the how to turn on the fog lamps and the manual was not helpful.

Solution: turn the light switch all the way to the right and pull the switch (out) towards you. Push switch in and it turns off. The manual says to turn switch all the way to right but doesn't say to pull switch out.

Aug 25, 2010 | 2004 Ford F150

1 Answer

How to factory wire fog lights on a 2000 ford f150. pig tail, relay, and fuse are there. Only no wiring from fuse box.


This is a common problem on 97-00 MY trucks, regardless of the trim level ( XL, XLT, Lariat ).

If you install the fog lamp fuse in the BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) Fuse # 9 ( 15 A fuse ) and jumper the normally open contacts in the fog lamp relay socket ( see diagram below ) the fog lamps should illuminate ( to confirm what you have doing on ).
8491ddd.jpg
The problem usually is the main headlamp switch to the BJB is not in place ( this is the yellow wire from the main headlamp switch connector to the relay socket pin #1 ).
One easy route is to make an aux lighting relay & harness, or purchase one online. With this, you can cut the factory ends and attach them to the harness you purchased. There is an air inlet next to where the steering wheel column runs through the firewall. This would give you an easy route to the fog lamp switch. The fog lamp switch, you can buy the factory one, and change the yellow wire from the connector to your added relay, or just add a switch for this function.
This will give you an idea of what the DIY relay and harness would look like.
5954a15.jpg

Hope this helps, more than confuses at this point

Sep 16, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

On a 1999 Ram 2500... the "fog" lights won't come on anymore. The headlight switch is pulled to activate these lights. Blubs are good but power is not getting to sockets. How can I test troubleshoot this...


Check the fuse located in the secondary fuse panel. It is located on the drivers side of the dash board behind a plastic cover approximately 6" wide by 8" long.

Jul 07, 2009 | 1999 Dodge Ram

2 Answers

1997 ford f150 fog lamps not working. Lamps new, fuse good


owners manual should explain it ... hopegully it's in the glove box

Apr 29, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Fuse for the brake lights


the fuse is located in the passenger compartment fuse box, behind a panel to the left of the steering column.

FUSE #13 20A Stop Lamp Switch (Lamps), Turn/Hazard
Flasher, Speed Control Module

Here is a link to your owners manual, this is where I got the fuse info.
http://www.motorcraftservice.com/pubs/content/~WOXF12/~MUS~LEN/36/99f12og1e.pdf

Dec 28, 2008 | 1999 Ford F150 Regular Cab

1 Answer

Lights


FROM: Lusty Kid:

Your fog lights should not work with high beam... they should work with the low beams. they are connected wrong, which probably drew too much current through the light switch burning out the contact points for the parking lights in the switch

Start by Fixing the fog light connections to work with low beams. Appears to me this was not factory installed. Aftermarket kit maybe! Then see if your parking lights work. If parking lights don't work still and everything else works, replace the light switch $50 at the dealer. The switch works the fog lamps when you pull out the knob to turn on the fog lamps when the lights are turned on. When the fogs are on you will see a little amber light to let you know your fogs are on. When you switch to high beam the fog lamps go off. Again if its not working that way, then is wired wrong. Needless to say, there should be connectors in the harness of the lights for the fog lamps. Use those if possible with the kit that you can get at the dealer, or you can splice the connector with those blue splicing clips sold at the auto part store. Make sure ground is ground when splicing and water proof the connection sith silicone and tape.

Dec 13, 2008 | 2004 Ford F150

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...