An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 10,000 points.
Re: right outside mirror broken - 2000 ford taurus
You have to remove the door panel first then unplug the mirror and remove the screws from the mirror and then put the new one on going in reverse you can try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are three bolts that hold it on. PLus the wiring. The triangle above the door panel pops loose, behind the mirror bracket. Be careful, it has a tab that goes down behind the door panel. Pop it loose, you can pull it down far enough to access the 10mm nuts.
1. remove the door panel by pulling lightly on the door panel.
2. remove the tweeter (small black thing in the corner of the door in front of the mirror).
3. unplug mirror if electric
4. remove the 3 mirror retaining bolts
5.replace with new mirror and reverse these steps
Feed the power mirror wiring through the opening in the front door (20124).
NOTE: When the battery (10655) is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy. To install, reverse the removal procedure.
the Glass element or the glass and backing assembly? if just the glass it is just glued on, Scotch two sided tape works as well, if the Glass and backing fixture it just snaps in and out of the drive motors.
Yes you can.
First you have to remove the mirror glass. Position mirror all the way in and up so you can grasp the bottom of mirror on the outboard edge. Then pull outward remove mirror.
Now you will see the 4 tabs holding the cover on,depress tabs and remove cover.
Sometimes the mirrors outside may have been pushed all the way by hand to one side on a Ford and it's as simple as you lightly pushing it by hand, then move the switch on the inside. A kid or car wash may have pushed it in hard and it's hung.