Question about Nissan Altima
The rear small glass window is broken and I want to replace it with new one
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Nissan Altima
HEY WHATS UP BRO this is what you have to do i just got brand new headlight replacements for my 05 nissan altima and it looks great by the way if you replace one you should just do both becasue it will look weird. anyways i have an hid kit as well but so. what you have to do is remove the bumper take all the plastic screw things off the top and on the botton underneith the bumber then you remove 2 screws on each side of the bumper they are located kinda in the dender well then you unscrew those then you can pretty much pull the bumper off there are 4 screws holding on each headlight 2 on top one on the side and one on the bottom front in order to remove the headlight you have to take off the bumper. hope this helps oh ya and buy buy the way you should get an hid kit the bulbe size for the altima is an h1 bulb and you need to get the single beam buld. get it at xenoneyes.com and the the 6000k. The 6000k look the best and is the brightest trust me you wont be let down they are brighter and last longer than the standard halogen bulb um also and like 5 times brighter. they are 129$ at xenoneyes.com thats the cheapest price that i have seen and they are a great value and good quality just dont touch the bulb. oh ya if you replace one headlight do both it looks much better. maybe try this web site to show you a little bit of how to do it
hope this helps my email is firstname.lastname@example.org let me know how it comes out
Posted on Sep 19, 2008
The oil filter is located behind the right (passenger) inner fender cover. It is right next to the crankshaft pulley at the bottom of the front of the engine facing toward the right front wheel. I do not have a picture at this time.
Hope this is helpful!
Nissan Scope Technician- 10+ years experience in Nissan dealership.
Posted on Nov 04, 2008
SOURCE: head light 2005 altima
you have to remove the bulbs from inside of the hood in the engine compartment. in some cars you have to remove some "pins' and remove the entire headlight assembly.. You then remove the holder where the lightbulb is located and replace the bulb.
Posted on Nov 18, 2008
On the interior, there is a rubber lip surrounding the window. This rubber lip holds the glass in place. Here is how to remove without breaking stuff: Collect about 6 sticks (more is better) that are flat and preferabley made of something a little bendable. The ones I use are plastic and measure 8 inches by 1/4 inch by 1 inch and taper down to a blunt, rounded blade at the end.
From the interior, pull back the rubber lip where it meets the cab... not the glass. Where the lip meets the cab, you jam one of the sticks in place so it holds the rubber lip away from the cab of the truck (towards the glass). Start near a corner. About 4 inches away, do this again. Keep doing this until you have all the sticks in place. I found that doing this around one end of the glass (driver or passenger side) allows me to work that end out and the rest will come out with minimal hassle.
Place window on stand and wrap rubber gasket around window.
Run a string that is about an 1/8 or 3/16 diameter into the groove that grabs the pinchweld of the cab. The string should be long enough to overlap. Overlap by at least a couple of inches. Tape excess string to interior of window.
Have help to jam the bottom of window INTO the cab opening and try to center as best you can.
While applying LIGHT pressure to outside of window, pull one end of string. What you are watching for is that the rubber lip at least catches the cab pinchweld. If you miss this, you will have to start over. (Sometimes you can save it if you have a hook tool handy. A hook tool is essentially a screwdriver bent sharply at a 90 degree angle.)
If you do it right, as you pull the string, it will pull the rubber lip toward the interior of the truck and it will catch the pinchweld of the window opening. A little messaging and slapping of the window will fully seat the glass.
You are done.
Posted on May 10, 2009
Tips for a great answer:
Dec 26, 2015 | 2005 Nissan Xterra
Oct 08, 2014 | 2005 Nissan Pathfinder
May 28, 2014 | 2005 Nissan Altima
Oct 23, 2012 | Cars & Trucks
Aug 01, 2010 | 2006 Nissan Altima
Sep 27, 2009 | Nissan Maxima Cars & Trucks
Aug 22, 2009 | 2005 Nissan Altima
Jul 11, 2009 | 1993 Nissan Altima
Apr 05, 2009 | 2005 Nissan Murano
Sep 24, 2008 | 2005 Nissan Altima
120 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: