Question about Kia Sorento

Open Question

Where is the egr valve sorento kia 2005 - Sorento Kia Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

eitan
  • 291 Answers

SOURCE: remove factory radio

This is one that you can stare at all day. the trim pieces that include the air vents (usually woodgrain) will come off and expose the screws that hold the radio in. They are held in by spring clips, a gentle pry will get you started. Here is a website that shows how to remove one for a cell phone mount: http://www.bracketron.com/main/xmain_landing_page.php You may have to take the climate controll screws out to get the radio out far enough to reach the plugs on the back. You should be able to figure out the rest. good luck, and be gentle.. the trim is getting cheaper and cheaper, and is really easy to break.

Posted on May 15, 2008

betz73
  • 298 Answers

SOURCE: Fuel Filter 2005 Kia Sorento

THE FUEL FILTER IS IN THE FUEL TANK, THERE IS A ACCESS PANEL UNDER THE REAR SEAT.

Posted on Nov 07, 2008

  • 1596 Answers

SOURCE: 2005 Dodge 1500 code p0404 EGR valve.

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Posted on Feb 05, 2009

  • 116 Answers

SOURCE: egr valve dodge durango

if this is a 4.7l engine, the valve is on the left rear of the intake. loosen the 8mm bolts that hold the egr intake tube to the egr valve, remove the egr bolts, disconnect wiring, remove valve and tube together, attach intake tube loosely to new valve, install new valve, tighten tube bolts to egr using a swivel socket, this is not a 5 minute job, so dont attempt unless you have some time and patience.

Posted on Apr 24, 2009

ZJLimited
  • 17970 Answers

SOURCE: egr valve location on dodge ram 2005 4.7

The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.

f0255cf.jpg

  1. Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
  2. Disconnect the vacuum line from the air cleaner assembly.
  3. Remove the wing nut that secures the air cleaner housing lid to the base.
  4. Remove both the air cleaner hosing lid and base.
  5. Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.
I hope help you with this. Good luck.

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the shift solenoid on a 2005 Kia Sorento 2wd


The shift solenoid is located inside of the transmission on the valve body.

May 24, 2015 | 2005 Kia Sorento

1 Answer

What causes popoff valve to popoff on 2005 Kia Sorento while adding freon


High pressure restriction look at the following components #1 overcharged system #2 condenser fans not operating when compressors on. #2 plugged or stuck closed expansion valve (oriface Tube) #3 restricted condenser.

Apr 07, 2014 | 2005 Kia Sorento

1 Answer

How do you change the third brakelight led board on a 2005 kia sportage


how do you remove the left valve cover on a 2004 kia sorento 6 cylender

Nov 26, 2013 | 2005 Kia Sorento

1 Answer

Kia sorento 2.5 cdri egr problem


sounds like the EGR valve get clogged by the diesel sludge, it could be cleaned, depending on the valve, one side could get blocked off. but we often changed the valve.

Jun 27, 2012 | 2004 Kia Sorento

1 Answer

Where is my egr valve on my kia sorento 2.5


You can try find it to near oil pan or if it is not broken it loocated near hood and you can hit it with hammer. So easy, i tryied and no working anymore.

Jun 08, 2012 | 2004 Kia Sorento EX

1 Answer

How do i change valve cover gasket on 2005 kia sorento?


Did you find a solution? I need to do the same thing.

Nov 11, 2010 | 2005 Kia Sorento

1 Answer

At what mileage should the timing belt on my kia sorento 2005 be changed?


the factory calls for every 60,000 miles, do not go over this mileage, if the belt breaks the valves will hit the pistions and u have a huge and expensive repair.

Oct 29, 2010 | 2005 Kia Sorento

4 Answers

Diesel smoking and lack of power


on my sorento same problem and its solved vacuum pump on turbo, now ok, sorry for bad english, vacuum membrane is broken

Mar 15, 2009 | 2005 Kia Sorento

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...