Question about 2001 Ford Taurus
Just replaced the heater hose assembly last week
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
the Glass element or the glass and backing assembly? if just the glass it is just glued on, Scotch two sided tape works as well, if the Glass and backing fixture it just snaps in and out of the drive motors.
Posted on May 28, 2009
If its a power mirror there is more thing you will have to remove to get to the wires but if not there is a screw on the corner piece on the inside of the door. just pull the screw out and the bolts (3) that hold the mirror on are behind it. If it power then you will have to remove the door panel to access the wiring to disconnect it
Posted on Jun 21, 2009
It could be a hose on top of the engine leaking back there. It could also be a freeze plug on the back of the engine. Its a round disk about 2-3" in diameter and is recessed about 3/8" into the block. Check those out and make sure all hoses are good and tight. Any hoses that are kind of puffed out above the clamp should be replaced
Posted on Sep 30, 2009
Tips for a great answer:
Nov 06, 2017 | 2001 Volkswagen Beetle
Jul 04, 2012 | 2001 Ford Windstar
Jul 24, 2011 | 2001 Ford Taurus
Aug 17, 2010 | 1999 Ford Expedition
Jun 03, 2010 | 2001 Ford Focus
Apr 28, 2010 | 1997 Pontiac Grand Am
Dec 05, 2009 | 1999 Ford Taurus
Sep 30, 2009 | 2001 Ford Taurus
Jul 26, 2009 | 1991 Ford Taurus
272 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: