Question about 1996 Ford Windstar

Open Question

1996 ford windstar orifice tube location - 1996 Ford Windstar

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: 97 ford windstar 3.8

oriface is a pipe like structure in which pressure of the liquid is increased

Posted on May 31, 2008

Ad
  • 23 Answers

SOURCE: location of orifice tube in 2004 ford taurus

orfice should be located on the accumulator, where the large line connects.

Posted on Oct 03, 2008

  • 93 Answers

SOURCE: Where, exactly, is the orifice tube located on my truck?

the orfice tube is locate in the line between condenser and evaporator. near the spring lock coupling. you must unbolt the cruise servo and overflow bottle, reposition them out of way and you will see the line connection..the orfice is inside line near that uniion. the ac system must be evacuated prior to removal, and recharged afterwards..

Posted on Jun 04, 2009

  • 60 Answers

SOURCE: location of orifice tube

Usually in the high pressure line close to where it goes into the firewall, Follow that line from the firewall down to where you should find a threaded, or springloaded fitting. When you separate that fittting you should find it inside the line.

Posted on Apr 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of orifice tube on a Ford windstar limited? Th


i would think its a crank sensor fault they dont always show up, when engine is warm try to rev engine past 3500 revs if it starts to miss then thats your problem.

Jun 09, 2017 | Ford Windstar Cars & Trucks

1 Answer

Where exactly is the orifice tube located on a 1987 Chevrolet G30 van?


The orifice tube is located inside the refrigerant line between the compressor and the evaporator, closest to the firewall.

May 12, 2014 | 1996 Mercury Sable

1 Answer

How to replace the oriface tube on a 2001 ford windstar


Remove condenser-to-evaporator refrigerant line. Separate line to expose fixed orifice tube. Pour small amount of clean refrigerant oil into cavity to aid removal. Engage Fixed Orifice Tube Remover/Replacer), hold tool body and turn "T" handle to draw out fixed orifice tube. To install, reverse removal procedure. Use new "O" rings coated with clean refrigerant oil.

Jan 25, 2013 | 2001 Ford Windstar

1 Answer

What the best way to get the orifice tube in my 2003 ford windstar.


ORIFICE TUBE IS IN SMALL REFRIGERANT LINE GOING INTO FIREWALL YOU WILL SEE LARGER REFRIGERANT LINE ABOVE SMALL REFRIGERANT LINE.USE NEEDLE NOSE PLIERS TO REMOVE ORIFICE TUBE.

Jun 26, 2011 | Ford Windstar Cars & Trucks

1 Answer

Where do I find the AC Orifice tube on a 1996 Ford taurus Experts.


The fixed orifice tube is located in the liquid line near the condenser...

Jun 19, 2011 | Ford Taurus Cars & Trucks

2 Answers

Location of orifice tube,2002 ford taurus sel


location of orifice tube/2002 taurus

May 14, 2010 | 2002 Ford Taurus

2 Answers

Air conditioning 1996 Ford Explorer


You were not clear, but I assume the compressor runs OK. If not, troubleshoot the electrical to the compressor. Did you replace the orifice tube while it was discharged for service? If not, then check the pressures. If low side pressure is high the tube might be plugged, especially if you truly had a bad compressor. In a properly working system the line should be cold on the evaporator side of the orifice tube when properly charged. If compressor runs, system properly charged and that line is warm then suspect a plugged tube.

Jun 30, 2009 | 1996 Ford Explorer

1 Answer

Where exactly is the orifice tube located at on a 1996 (DOHC v6)?


it's in the high pressure liquid line.

A/C Evaporator Core Orifice The A/C evaporator core orifice (19D990) should be replaced whenever the A/C compressor (19703) is replaced for lack of performance (internal damage). The A/C evaporator core orifice, located in the condenser to evaporator tube (19835), cannot be serviced in detail as a component of the line. If replacement is necessary, follow the procedure outlined for Liquid Line Removal and Installation. An orifice tube replacement service kit may be used as an optional service procedure. Refer to Section 12-00 for information regarding the use of an A/C Evaporator Core Orifice Replacement Kit E5VY-19D695-A.
-----------------------------------------------------------------------------------
A/C Evaporator Core Orifice Replacement Kit Installation
  1. Discharge A/C refrigerant system. Refer to System Discharging and Recovery as outlined.
  1. Remove condenser to evaporator tube (19835) from vehicle.
  1. Locate A/C evaporator core orifice (19D990) by three indentations or a circular recess in metal portion of the condenser to evaporator tube.


    A/C Evaporator Core Orifice Location
32c58e1.gif
  1. Note angular position of ends of condenser to evaporator tube so that it can be reassembled in correct position.
  1. Cut a 63.5 mm (2.5 inch) section from condenser to evaporator tube at A/C evaporator core orifice location. Do not cut closer than 25.4 mm (1 inch) from start of a bend in tube.


    A/C Evaporator Core Orifice Section Removed From the Liquid Line
    ea95a2d.gif
  1. Remove contaminants from the two pieces of the condenser to evaporator tube.
  1. NOTE: The inlet half of the condenser to evaporator tube will be positioned against the A/C evaporator core orifice tabs when correctly assembled.

    Lubricate fitting with clean refrigerant oil and assemble orifice tube kit (with A/C evaporator core orifice installed) to condenser to evaporator tube. Make sure flow direction arrow is pointing toward evaporator end of the condenser to evaporator tube, and taper of each compressor ring is toward compression nut.


    A/C Evaporator Core Orifice Kit Disassembled Components
    4280629.gif

Jun 05, 2009 | 1996 Mercury Sable

1 Answer

Location of orifice tube in 2004 ford taurus


orfice should be located on the accumulator, where the large line connects.

Oct 03, 2008 | 2004 Ford Taurus

2 Answers

97 ford windstar 3.8


mnay ford have the orifice tube built with the liquid line as an assembly
the liquid line goes from the a/c condenser to the a/c evaporator
and the evaporator is inside the dash board but the liquid line is in the engine comparmet

May 31, 2008 | 1997 Ford Windstar

Not finding what you are looking for?
1996 Ford Windstar Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...